home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Arsenal
/
OS2 Arsenal v1.0 (Disc 1)(Arsenal Computer).ISO
/
os2_inet
/
apps20c2.exe
/
BPUBSC1.ZIP
/
DOC
/
KDVL2MST.INF
(
.txt
)
Wrap
OS/2 Help File
|
1993-12-10
|
253KB
|
9,155 lines
ΓòÉΓòÉΓòÉ 1. Conventions Used in This Reference ΓòÉΓòÉΓòÉ
The following conventions are used:
Commands are presented in lowercase bold, but you can enter them in either
uppercase or lowercase.
Subcommands are presented in lowercase, and you must enter them in lowercase.
File names are presented in uppercase, but you can enter them in either
uppercase or lowercase.
Periods in numbers separate the whole and the decimal portions of the
numerals.
Numbers over four digits appear in metric style. A space is used, rather than
a comma, to separate groups of three digits. For example, the number sixteen
thousand, one hundred forty-seven is written 16147.
ΓòÉΓòÉΓòÉ 2. How to Read a Syntax Diagram ΓòÉΓòÉΓòÉ
The syntax diagram shows you how to specify a command or subcommand so that the
operating system can correctly interpret what is being typed. Read the syntax
diagram from left to right and from top to bottom, following the horizontal
line (the main path).
Syntax diagrams use the following symbols:
Symbol Description
Marks the beginning of the command or subcommand syntax
Marks the continuation of the command or subcommand
| Marks the beginning and end of a fragment or part of the command or
subcommand syntax
Marks the end of the command or subcommand syntax
Required parameters are displayed on the main path. Optional parameters are
displayed below the main path. Default parameters are displayed above the main
path.
Parameters are classified as keywords or variables. Keywords display in
uppercase or lowercase, but you must type them as they are shown in the syntax
diagram. A command or subcommand, for example, is a keyword. Conventions Used
in this Reference contains the guidelines about entering TCP/IP commands and
subcommands.
Variables appear in lowercase letters, and represent names or values you
supply. For example, a file name is a variable.
In the following example, infile and outfile are variables. Replace them with
the values that you want.
ΓöÇΓöÇos22unixΓöÇΓöÇ <infileΓöÇΓöÇ >outfileΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Include all punctuation such as colons, semicolons, commas, quotation marks,
and minus signs shown in the diagram.
Choose One Required Item from a Stack: A stack of parameters with a parameter
on the main path means that you must choose one from the stack.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇsnmpΓöÇΓöÇΓö¼ΓöÇgetΓöÇΓöÇΓö¼ΓöÇΓöÇhostΓöÇΓöÇcommunity_nameΓöÇΓöÇΓöÇΓöÇmib_variableΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnextΓöÇΓöÿ
Choose One Optional Item from a Stack: A stack of parameters without a
parameter on the main path means that you do not have to choose any from the
stack; but if you do, you cannot choose more than one.
ΓöÇΓöÇipgateΓöÇΓöÇΓö¼ΓöÇonΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇoffΓöÇΓöÿ
Specify a Sequence More Than Once: An arrow above the main path that returns
to a previous point means the sequence of items included by the arrow can be
specified more than once.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇmkfontdrΓöÇΓöÇΓöÇΓöÇdirectoryΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 3. Service Information ΓòÉΓòÉΓòÉ
The IBM Support Center provides you with telephone assistance in problem
diagnosis and resolution. You can call the IBM Support Center at any time; you
will receive a return call within eight business hours (Monday-Friday, 8:00
a.m.-5:00 p.m., local customer time). The number to call is 1-800-237-5511.
Outside the United States or Puerto Rico, contact your local IBM representative
or your authorized IBM supplier.
ΓòÉΓòÉΓòÉ 4. arp Command ΓòÉΓòÉΓòÉ
The arp command displays or modifies the address translation tables used by the
address resolution protocol.
ΓöÇΓöÇarpΓöÇΓöÇΓö¼ΓöÇhostnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ
Γö£ΓöÇ -aΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ -fΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ -d hostnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇ -s hostname physical_addressΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÿ
ΓööΓöÇtempΓöÇΓöÿ ΓööΓöÇpubΓöÇΓöÿ
Displaying arp Help
ΓöÇΓöÇarpΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> hostname ΓòÉΓòÉΓòÉ
Specifies the host name or the internet address of the remote host.
ΓòÉΓòÉΓòÉ <hidden> -a ΓòÉΓòÉΓòÉ
Displays all current ARP entries.
ΓòÉΓòÉΓòÉ <hidden> -f ΓòÉΓòÉΓòÉ
Deletes all entries in the ARP table.
ΓòÉΓòÉΓòÉ <hidden> -d hostname ΓòÉΓòÉΓòÉ
Deletes an entry for the host hostname.
ΓòÉΓòÉΓòÉ <hidden> -s hostname physical_address ΓòÉΓòÉΓòÉ
Creates an ARP entry for the host with the physical hardware address specified.
ΓòÉΓòÉΓòÉ <hidden> temp ΓòÉΓòÉΓòÉ
Specifies that the ARP entry is temporary. If you do not specify this
parameter, the entry is permanently added to the ARP table.
ΓòÉΓòÉΓòÉ <hidden> pub ΓòÉΓòÉΓòÉ
Specifies that the entry name is published. The host will respond to ARP
requests for the hostname even though it is not the original host name.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 5. bdftopcf Command ΓòÉΓòÉΓòÉ
The bdftopcf command converts Bitmap Distribution Format (BDF) fonts to
Portable Compiled Format (PCF) fonts.
ΓöÇΓöÇbdftopcfΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇiΓöÇΓöÿ ΓööΓöÇ ΓöÇlΓöÇΓöÿ ΓööΓöÇ ΓöÇLΓöÇΓöÿ ΓööΓöÇ ΓöÇmΓöÇΓöÿ ΓööΓöÇ ΓöÇMΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇo output_filenameΓöÇΓöÿ ΓööΓöÇ ΓöÇpnΓöÇΓöÿ ΓööΓöÇ ΓöÇtΓöÇΓöÿ ΓööΓöÇ ΓöÇunΓöÇΓöÿ
ΓöÇΓöÇfilenameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The bdftopcf operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -i ΓòÉΓòÉΓòÉ
Inhibits the normal computation of ink metrics. When a font has glyph images
that do not fill the bitmap image (for example, the on pixels do not extend to
the edges of the metrics), the bdftopcf command computes the actual ink metrics
and places them in the .PCF file. The -t parameter inhibits this behavior.
ΓòÉΓòÉΓòÉ <hidden> -l ΓòÉΓòÉΓòÉ
Sets the font bit order to the least significant bit first. For example, the
left-most bit on the screen will be in the least valued bit in each unit.
ΓòÉΓòÉΓòÉ <hidden> -L ΓòÉΓòÉΓòÉ
Sets the font byte order to least significant byte first. All multibyte data in
the file name (metrics, bitmaps, and so on) will be written in
least-significant-byte-first format.
ΓòÉΓòÉΓòÉ <hidden> -m ΓòÉΓòÉΓòÉ
Sets the font bit order to most significant bit first. Bits for each glyph will
be placed in this order. For example, the left most bit on the screen will be
in the highest valued bit in each unit.
ΓòÉΓòÉΓòÉ <hidden> -M ΓòÉΓòÉΓòÉ
Sets the font byte order to most significant byte first. All multibyte data in
the file (metrics, bitmaps, and everything else) will be written
most-significant-byte-first format.
ΓòÉΓòÉΓòÉ <hidden> -o output_filename ΓòÉΓòÉΓòÉ
By default, bdftopcf writes the .PCF file to standard output; this option gives
the name of a file to be used instead.
ΓòÉΓòÉΓòÉ <hidden> -pn ΓòÉΓòÉΓòÉ
Sets the font glyph padding. Each glyph in the font will have each scanline
padded to a multiple of n bytes, where n is 1, 2, 4, or 8.
ΓòÉΓòÉΓòÉ <hidden> -t ΓòÉΓòÉΓòÉ
Specifies that bdftopcf converts fonts into terminal fonts when possible. A
terminal font has each glyph image padded to the same size. The X WIndow
System server can usually render these types of fonts more quickly.
ΓòÉΓòÉΓòÉ <hidden> -un ΓòÉΓòÉΓòÉ
Sets the font scanline unit. When the font bit order is different from the
font byte order, the scanline unit n describes what unit of data (in bytes) is
to be swapped. The unit n can be 1, 2, or 4.
ΓòÉΓòÉΓòÉ <hidden> filename ΓòÉΓòÉΓòÉ
Specifies the name of the file containing the BDF font.
ΓòÉΓòÉΓòÉ 6. bootp Command ΓòÉΓòÉΓòÉ
The bootp command finds the internet address for a client host from a server.
The bootp command causes the local host hardware address (which has been
uniquely assigned to the interface hardware adapter) to broadcast over the
local TCP/IP network.
ΓöîΓöÇlan0ΓöÇΓöÉ
ΓöÇΓöÇbootpΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇlannΓöÇΓöÿ
Displaying bootp Help
ΓöÇΓöÇbootpΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The lann parameter is the network of the BOOTP server.
ΓòÉΓòÉΓòÉ <hidden> lan0 ΓòÉΓòÉΓòÉ
Broadcasts to the lan0 network. This is the default.
ΓòÉΓòÉΓòÉ <hidden> lann ΓòÉΓòÉΓòÉ
Broadcasts to the lann network where n is 0-7.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays the list of parameters and their meanings.
ΓòÉΓòÉΓòÉ 7. bootpd Command ΓòÉΓòÉΓòÉ
The bootpd command starts the BOOTP server. The BOOTP server receives the
hardware address and looks for a match in the TCPIP\ETC\BOOTPTAB file. When the
server finds a match, it sends an internet address, a subnetwork, and other
information to the client. The boot protocol works over a single network, but
not through a router. A BOOTPTAB table must be configured with the hardware and
internet address pairs plus network parameters. A sample BOOTPTAB file resides
in the TCPIP\ETC directory.
The services file in the ETC directory must include:
sbootp 67/udp #bootp server
cbootp 68/udp #bootp client
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇbootpdΓöÇΓöÇΓöÇΓöÇ -dΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Displays debugging information, such as hardware address, on the server
terminal. You can specify more than one -d parameter to display any debug
information. Each additional -d increases the amount of debugging information
displayed. You can specify -d up to five times.
ΓòÉΓòÉΓòÉ 8. finger Command ΓòÉΓòÉΓòÉ
The finger command displays information about the users on a remote host.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇfingerΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇhostΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇuser@ΓöÇΓöÿ
Displaying finger Help
ΓöÇΓöÇfingerΓöÇΓöÇ-?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> user@ ΓòÉΓòÉΓòÉ
Specifies the user name to be queried on the remote host. This parameter is
optional; however, if you specify a user, the host must be followed by an @.
Without user@, the finger command displays all users currently logged on at the
host. With user@, only detailed information about the user being queried will
be displayed.
Note: A space is required between multiple user@host entries.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies a host from which you request user information. This parameter is
required.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 9. ftp Command ΓòÉΓòÉΓòÉ
The ftp command transfers files between your workstation and a remote host that
is running an FTP server.
ΓöÇΓöÇftpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ -dΓöÇΓöÿ ΓööΓöÇ -gΓöÇΓöÿ ΓööΓöÇ -nΓöÇΓöÿ ΓööΓöÇ -iΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ -vΓöÇΓöÿ ΓööΓöÇ ΓöÇc codepageΓöÇΓöÿ ΓööΓöÇhostΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ
ΓööΓöÇportΓöÇΓöÿ
Displaying ftp Help
ΓöÇΓöÇftpΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Subcommands
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Enables debugging.
ΓòÉΓòÉΓòÉ <hidden> -g ΓòÉΓòÉΓòÉ
Disables file name globbing (extension).
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Specifies that FTP does not look in the NETRC file. You must enter the user ID
and password for the remote host.
ΓòÉΓòÉΓòÉ <hidden> -i ΓòÉΓòÉΓòÉ
Disables interactive prompting.
ΓòÉΓòÉΓòÉ <hidden> -v ΓòÉΓòÉΓòÉ
Toggles verbose mode on. When verbose mode is on, FTP displays all responses
from the remote server.
ΓòÉΓòÉΓòÉ <hidden> -c codepage ΓòÉΓòÉΓòÉ
Specifies the ASCII codepage used by the remote host. If you do not specify a
codepage, the data is sent untranslated.
Some other possible selections are TCPDECMU for the DEC[**] Multinational
codepage, TCP8859 for ISO 8859 codepage, or NONE for PC codepage 850.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the remote host to which you are connecting.
ΓòÉΓòÉΓòÉ <hidden> port ΓòÉΓòÉΓòÉ
Specifies the destination port to which you are connecting. If port is not
specified, you are connected by default to the well-known FTP port as specified
in the services file.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ <hidden> ** ΓòÉΓòÉΓòÉ
DEC is a trademark of Digital Equipment Corporation.
ΓòÉΓòÉΓòÉ <hidden> FTP Subcommands ΓòÉΓòÉΓòÉ
The following subcommands can be used in the ftp command shell.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé! Γöé$ Γöéaccount Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéappend Γöéascii Γöébell Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöébinary Γöébye Γöécd Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöécdup Γöéclose Γöécr Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöédebug Γöédelete Γöédir Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöédisconnect Γöéform Γöéget Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéglob Γöéhash Γöéhelp Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöélcd Γöéls Γöémacdef Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöémdelete Γöémget Γöémkdir Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöémode Γöémput Γöénmap Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéntrans Γöéopen Γöéprompt Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéproxy Γöéput Γöépwd Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéquit Γöéquote Γöérecv Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéremotehelp Γöérename Γöéreset Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöérmdir Γöérunique Γöésend Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöésendport Γöésite Γöéstatus Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéstruct Γöésunique Γöétrace Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöétype Γöéuser Γöéverbose Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé? Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> ! Subcommand ΓòÉΓòÉΓòÉ
The ! subcommand enters the OS/2 command processor while keeping the FTP
command shell in resident memory. This subcommand can also invoke the OS/2
command shell to issue a single command and immediately return to FTP.
If you enter the ! subcommand without parameters, you will enter an OS/2
command shell. To return to the FTP command shell from the OS/2 command shell,
type:
EXIT
ΓöÇΓöÇ!ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇcommandΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇparametersΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> command ΓòÉΓòÉΓòÉ
Specifies the OS/2 command that you want to issue
ΓòÉΓòÉΓòÉ <hidden> parameters ΓòÉΓòÉΓòÉ
Specifies any parameters required by the OS/2 command
ΓòÉΓòÉΓòÉ <hidden> $ Subcommand ΓòÉΓòÉΓòÉ
The $ subcommand issues FTP macros created with the macdef subcommand.
ΓöÇΓöÇ$ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇmacro_nameΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇparametersΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> macro_name ΓòÉΓòÉΓòÉ
Specifies the macro name.
ΓòÉΓòÉΓòÉ <hidden> parameters ΓòÉΓòÉΓòÉ
Specifies any parameters to be passed to the macro. You can specify more than
one parameter.
ΓòÉΓòÉΓòÉ <hidden> account Subcommand ΓòÉΓòÉΓòÉ
The account subcommand sends the account information to the remote host. You
can issue the account subcommand with the abbreviation ac.
ΓöÇΓöÇaccountΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇaccount_nameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> account_name ΓòÉΓòÉΓòÉ
Specifies the account name on the remote host. If you do not specify the
account name, FTP prompts you for it in non-echo mode.
ΓòÉΓòÉΓòÉ <hidden> append Subcommand ΓòÉΓòÉΓòÉ
The append subcommand adds a file on your workstation to a file on the remote
host. append transfers a file from your workstation to the remote host and adds
it to the specified file or to a file of the same name. You can issue the
append subcommand with the abbreviation ap.
ΓöÇΓöÇappendΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇ
ΓööΓöÇsource_fileΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇdestination_fileΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> source_file ΓòÉΓòÉΓòÉ
Specifies the name of the file on your workstation that is to be transferred
and appended to a file on the remote host. If you do not specify this value,
FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> destination_file ΓòÉΓòÉΓòÉ
Specifies the name of the remote host file to which you want to append the
source_file.
ΓòÉΓòÉΓòÉ <hidden> ascii Subcommand ΓòÉΓòÉΓòÉ
The ascii subcommand sets the file transfer type to ASCII. Using the ascii
subcommand is the same as issuing the type subcommand with the ascii parameter.
You can issue the ascii subcommand with the abbreviation as.
ΓöÇΓöÇasciiΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> bell Subcommand ΓòÉΓòÉΓòÉ
The bell subcommand toggles the bell sound on and off. If bell is on, it will
sound after each file transfer is complete. You can issue the bell subcommand
with the abbreviation be.
ΓöÇΓöÇbellΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> binary Subcommand ΓòÉΓòÉΓòÉ
The binary subcommand sets the file transfer type to binary. The binary file
transfer type is useful for image transfers, such as executable files. Using
the binary subcommand is the same as issuing the type subcommand with the
binary parameter. You can issue the binary subcommand with the abbreviation bi.
ΓöÇΓöÇbinaryΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> bye Subcommand ΓòÉΓòÉΓòÉ
The bye subcommand ends the FTP session and leaves the FTP command shell. The
bye subcommand closes any open connection. Using bye is the same as issuing the
quit subcommand. You can issue the bye subcommand with the abbreviation by.
ΓöÇΓöÇbyeΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> cd Subcommand ΓòÉΓòÉΓòÉ
The cd subcommand changes the working directory on the remote host.
ΓöÇΓöÇcdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇdirectory_nameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> directory_name ΓòÉΓòÉΓòÉ
Specifies the name of the file directory on the remote host that becomes the
current working directory for file transfer tasks. If you do not specify this
value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> cdup Subcommand ΓòÉΓòÉΓòÉ
The cdup subcommand changes the current working directory on the remote host to
the current parent directory on the remote host. You can issue the cdup
subcommand with the abbreviation cdu.
ΓöÇΓöÇcdupΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> close Subcommand ΓòÉΓòÉΓòÉ
The close subcommand ends the FTP connection but does not leave the FTP command
shell. Using the close subcommand is the same as issuing the disconnect
subcommand. You can issue the close subcommand with the abbreviation cl.
ΓöÇΓöÇcloseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> cr Subcommand ΓòÉΓòÉΓòÉ
The cr subcommand strips the carriage return character from a carriage return
or line feed sequence when receiving records during ASCII-type file transfers.
Issue the cr subcommand to set carriage return stripping off. Issue the cr
subcommand again to set carriage return stripping on.
ΓöÇΓöÇcrΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> debug Subcommand ΓòÉΓòÉΓòÉ
The debug subcommand sets debugging on or off. The initial setting is for debug
to be off. You can issue the debug subcommand with the abbreviation deb.
ΓöÇΓöÇdebugΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> delete Subcommand ΓòÉΓòÉΓòÉ
The delete subcommand deletes a file from the remote host. You can issue the
delete subcommand with the abbreviation del.
ΓöÇΓöÇdeleteΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇfile_nameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> file_name ΓòÉΓòÉΓòÉ
Specifies the name of the file to be deleted from the remote host. If you do
not specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> dir Subcommand ΓòÉΓòÉΓòÉ
The dir subcommand displays a listing of the files and directories in the
directory on the remote host.
ΓöÇΓöÇdirΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöé ΓöîΓöÇ ΓöÇ ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ Γöé
ΓööΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÿ
Γö£ΓöÇpathΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ ΓööΓöÇfile_nameΓöÇΓöÿ
Γö£ΓöÇpatternΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇpathΓöÇΓöÇpatternΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> path ΓòÉΓòÉΓòÉ
Specifies a path to a different directory, a specific file, or both.
ΓòÉΓòÉΓòÉ <hidden> pattern ΓòÉΓòÉΓòÉ
Specifies the pattern of the file names to be listed. Patterns are any
combination of ASCII characters. The following two characters have special
meaning:
* The asterisk means that any character or group of characters can occupy
that position in the pattern.
? The question mark means that any single character can occupy that position
in the pattern.
ΓòÉΓòÉΓòÉ <hidden> file_name ΓòÉΓòÉΓòÉ
Specifies the name of a file on your workstation to which you want to write the
output. If you specify a file name, you must also specify a path or pattern. If
you do not specify a file name or if you specify a hyphen (-), the output is
displayed on the screen.
ΓòÉΓòÉΓòÉ <hidden> disconnect Subcommand ΓòÉΓòÉΓòÉ
The disconnect subcommand ends the FTP connection but does not leave the FTP
command shell. Using the disconnect subcommand is the same as issuing the close
subcommand. You can issue the disconnect subcommand with the abbreviation dis.
ΓöÇΓöÇdisconnectΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> form Subcommand ΓòÉΓòÉΓòÉ
The form subcommand sets the file transfer format. You can issue the form
subcommand with the abbreviation f.
ΓöÇΓöÇformΓöÇΓöÇformatΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> format ΓòÉΓòÉΓòÉ
Specifies the file transfer format (only nonprint is supported).
ΓòÉΓòÉΓòÉ <hidden> get Subcommand ΓòÉΓòÉΓòÉ
The get subcommand transfers a file from a remote host to your workstation. The
current settings for the type and struct subcommands are used with get.
ΓöÇΓöÇgetΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsource_fileΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
Γö£ΓöÇdestination_fileΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇconΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇprnΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> source_file ΓòÉΓòÉΓòÉ
Specifies the name of the file on the remote host that is to be transferred to
your workstation. If you do not specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> destination_file ΓòÉΓòÉΓòÉ
Specifies the name given to the source file when it is stored on your
workstation. If destination_file is not specified, the source_file name is used
and changed, if necessary, to conform to OS/2 file-naming conventions. If the
name of the file being received is the same as a file that already exists on
your workstation, your existing file is overwritten by the incoming file,
unless runique is set to on. If runique is set to on, a unique file name is
created for the incoming file, and your existing file is unchanged. If you are
unsure whether runique is set to on, use the status subcommand to check the
setting.
ΓòÉΓòÉΓòÉ <hidden> con ΓòÉΓòÉΓòÉ
Specifies that the file is to be displayed on your screen.
ΓòÉΓòÉΓòÉ <hidden> prn ΓòÉΓòÉΓòÉ
Specifies that the file is to be sent to a printer or special device.
ΓòÉΓòÉΓòÉ <hidden> glob Subcommand ΓòÉΓòÉΓòÉ
The glob subcommand toggles the file name expansion for the mdelete, mget, and
mput subcommands. You can use patterns when glob is on; this is the initial
setting. You can issue the glob subcommand with the abbreviation gl.
ΓöÇΓöÇglobΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> hash Subcommand ΓòÉΓòÉΓòÉ
The hash subcommand toggles hash mark printing. When hash is on, FTP displays
hash marks (#) to indicate data transfer progress. You can issue the hash
subcommand with the abbreviation ha.
ΓöÇΓöÇhashΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> help Subcommand ΓòÉΓòÉΓòÉ
The help subcommand displays help information for the FTP command shell. Using
the help subcommand is the same as issuing the ? subcommand. You can issue the
help subcommand with the abbreviation he.
ΓöÇΓöÇhelpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies the subcommand for which you are requesting help.
ΓòÉΓòÉΓòÉ <hidden> lcd Subcommand ΓòÉΓòÉΓòÉ
The lcd subcommand changes or displays the current working directory on your
workstation. You can issue the lcd subcommand with the abbreviation lc.
ΓöÇΓöÇlcdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇlocal_pathΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> local_path ΓòÉΓòÉΓòÉ
Specifies the name of a directory on your workstation that you want to make
your current directory. If you do not specify a local path, the name of the
current working directory on your workstation is displayed.
ΓòÉΓòÉΓòÉ <hidden> ls Subcommand ΓòÉΓòÉΓòÉ
The ls subcommand provides a listing of the files in the current working
directory on the remote host.
ΓöÇΓöÇlsΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöé ΓöîΓöÇ ΓöÇ ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ Γöé
ΓööΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÿ
Γö£ΓöÇpathΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ ΓööΓöÇfile_nameΓöÇΓöÿ
Γö£ΓöÇpatternΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇpathΓöÇΓöÇpatternΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> path ΓòÉΓòÉΓòÉ
Specifies a path to a different directory, specific file, or both.
ΓòÉΓòÉΓòÉ <hidden> pattern ΓòÉΓòÉΓòÉ
Specifies the pattern of the files in the directory to be listed. Patterns are
any combination of ASCII characters. The following two characters have special
meaning:
* The asterisk means that any character or group of characters can occupy
that position in the pattern.
? The question mark means that any single character can occupy that position
in the pattern.
ΓòÉΓòÉΓòÉ <hidden> file_name ΓòÉΓòÉΓòÉ
Specifies the name of a file on your workstation to which you want to write the
output. If you specify a file name, you must also specify a path or pattern. If
you do not specify a file name, or if you specify a hyphen (-), the output is
displayed on the screen.
ΓòÉΓòÉΓòÉ <hidden> macdef Subcommand ΓòÉΓòÉΓòÉ
The macdef subcommand defines a macro name and begins macro input mode. Macros
remain defined until you issue the close subcommand. FTP limits you to 16
macros and a total of 4096 characters in all defined macros. You can issue the
macdef subcommand with the abbreviation ma.
ΓöÇΓöÇmacdefΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇmacro_nameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> macro_name ΓòÉΓòÉΓòÉ
Specifies the macro name.
ΓòÉΓòÉΓòÉ <hidden> mdelete Subcommand ΓòÉΓòÉΓòÉ
The mdelete subcommand deletes a group of files from the remote host. The glob
subcommand must be set to on to use this subcommand. If you are unsure whether
glob is set to on, use the status subcommand to check the setting. You can
issue the mdelete subcommand with the abbreviation mde.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇmdeleteΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇpatternΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> pattern ΓòÉΓòÉΓòÉ
Specifies the name pattern of the files to be deleted from the remote host.
Patterns are any combination of ASCII characters. The following two characters
have special meaning:
* The asterisk means that any character or group of characters can occupy
that position in the pattern.
? The question mark means that any single character can occupy that position
in the pattern.
You can specify more than one pattern with the mdelete subcommand. If you do
not specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> mget Subcommand ΓòÉΓòÉΓòÉ
The mget subcommand transfers a group of files from the remote host to your
workstation. The glob subcommand must be set to on to use this subcommand. If
you are unsure whether glob is set to on, use the status subcommand to check
the setting. You can issue the mget subcommand with the abbreviation mg.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇmgetΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇpatternΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> pattern ΓòÉΓòÉΓòÉ
Specifies the name pattern of the files to be transferred from the remote host
to your workstation. Patterns are any combination of ASCII characters. The
following two characters have special meaning:
* The asterisk means that any character or group of characters can occupy
that position in the pattern.
? The question mark means that any single character can occupy that position
in the pattern.
You can specify more than one pattern with the mget subcommand. If you do not
specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> mkdir Subcommand ΓòÉΓòÉΓòÉ
The mkdir subcommand creates a directory on the remote host. You can issue the
mkdir subcommand with the abbreviation mk.
ΓöÇΓöÇmkdirΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇdirectoryΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> directory ΓòÉΓòÉΓòÉ
Specifies the path to the directory that you are creating. If you do not
specify a directory, the FTP command prompts you for the path.
ΓòÉΓòÉΓòÉ <hidden> mode Subcommand ΓòÉΓòÉΓòÉ
The mode subcommand sets the file transfer mode. You can issue the mode
subcommand with the abbreviation mo.
ΓöÇΓöÇmodeΓöÇΓöÇmode_nameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> mode_name ΓòÉΓòÉΓòÉ
Specifies the file transfer mode (only stream is supported).
ΓòÉΓòÉΓòÉ <hidden> mput Subcommand ΓòÉΓòÉΓòÉ
The mput subcommand transfers a group of files from your workstation to a
remote host. The glob subcommand must be set to on to use this subcommand. If
you are unsure whether glob is set to on, use the status subcommand to check
the setting. You can issue the mput subcommand with the abbreviation mp.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇmputΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇpatternΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> pattern ΓòÉΓòÉΓòÉ
Specifies the name pattern of the files to be copied from your workstation to
the remote host. Patterns are any combination of ASCII characters. The
following two characters have special meaning:
* The asterisk means that any character or group of characters can occupy
that position in the pattern.
? The question mark means that any single character can occupy that position
in the pattern.
You can specify more than one pattern with the mput subcommand. If you do not
specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> nmap Subcommand ΓòÉΓòÉΓòÉ
The nmap subcommand toggles file name mapping. The initial setting for nmap is
off. File name mapping occurs with the put and mput subcommands and with the
get and mget subcommands when they are issued without a local file name. You
can issue the nmap subcommand with the abbreviation nm.
ΓöÇΓöÇnmapΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇinpatternΓöÇΓöÇoutpatternΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> inpattern ΓòÉΓòÉΓòÉ
Specifies the character pattern of the file names.
ΓòÉΓòÉΓòÉ <hidden> outpattern ΓòÉΓòÉΓòÉ
Specifies the character pattern of the remote host file names.
ΓòÉΓòÉΓòÉ <hidden> ntrans Subcommand ΓòÉΓòÉΓòÉ
The ntrans subcommand toggles file name character translation. The initial
setting for ntrans is off. If you do not specify inchars with the ntrans
subcommand, the current status of ntrans is displayed. You can issue the ntrans
subcommand with the abbreviation nt.
ΓöÇΓöÇntransΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇincharsΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇoutcharsΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> inchars ΓòÉΓòÉΓòÉ
Specifies the character for the file name on the workstation
ΓòÉΓòÉΓòÉ <hidden> outchars ΓòÉΓòÉΓòÉ
Specifies the character for the remote file name
ΓòÉΓòÉΓòÉ <hidden> open Subcommand ΓòÉΓòÉΓòÉ
The open subcommand establishes a connection to a remote host. You can issue
the open subcommand with the abbreviation o.
ΓöÇΓöÇopenΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇportΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the remote host to which you want to connect. If you do not specify
host, FTP prompts you for a host.
ΓòÉΓòÉΓòÉ <hidden> port ΓòÉΓòÉΓòÉ
Specifies the destination port to which you are connecting. If you do not
specify a port, you are connected by default to the well-known FTP port as
specified in the services file.
ΓòÉΓòÉΓòÉ <hidden> prompt Subcommand ΓòÉΓòÉΓòÉ
The prompt subcommand toggles interactive prompting. The initial setting for
prompt is on. You can issue the prompt subcommand with the abbreviation prom.
ΓöÇΓöÇpromptΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> proxy Subcommand ΓòÉΓòÉΓòÉ
The proxy subcommand forwards subcommands to another server to allow logical
connections between two servers; this connection allows file transfers between
the servers. You can issue the proxy subcommand with the abbreviation prox.
ΓöÇΓöÇproxyΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies an ftp subcommand. If you do not specify this value, FTP will prompt
you for it.
ΓòÉΓòÉΓòÉ <hidden> put Subcommand ΓòÉΓòÉΓòÉ
The put subcommand transfers a file from your workstation to a remote host.
Using the put subcommand is the same as issuing the send subcommand. You can
issue the put subcommand with the abbreviation pu.
ΓöÇΓöÇputΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsource_fileΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
Γö£ΓöÇdestination_fileΓöÇΓöñ
Γö£ΓöÇconΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇprnΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> source_file ΓòÉΓòÉΓòÉ
Specifies the name of the file on your workstation that is to be transferred to
the remote host. If you do not specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> destination_file ΓòÉΓòÉΓòÉ
Specifies the name given to the source_file when it is stored on the remote
host. If destination_file is not specified, the source_file name is used and
changed, if necessary, to conform to OS/2 file-naming conventions. If the name
of the file being received is the same as a file that already exists on the
remote host, the existing file is overwritten by the incoming file, unless
sunique is on. If sunique is on, a unique file name is created for the incoming
file, and the existing file is unchanged.
ΓòÉΓòÉΓòÉ <hidden> con ΓòÉΓòÉΓòÉ
Specifies that the file is to be displayed on the server screen.
ΓòÉΓòÉΓòÉ <hidden> prn ΓòÉΓòÉΓòÉ
Specifies that the file is to be sent to a destination printer or special
device.
ΓòÉΓòÉΓòÉ <hidden> pwd Subcommand ΓòÉΓòÉΓòÉ
The pwd subcommand displays the name of the current working directory on the
remote host. You can issue the pwd subcommand with the abbreviation pw.
ΓöÇΓöÇpwdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> quit Subcommand ΓòÉΓòÉΓòÉ
The quit subcommand ends the FTP session and exits the FTP command shell. Using
the quit subcommand is the same as issuing the bye subcommand. You can issue
the quit subcommand with the abbreviation qui.
ΓöÇΓöÇquitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> quote Subcommand ΓòÉΓòÉΓòÉ
The quote subcommand sends the specified text to the remote host verbatim.
Note: Using quote with commands that involve data transfers can produce
unpredictable results.
You can issue the quote subcommand with the abbreviation quo.
ΓöÇΓöÇquoteΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇargumentΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> argument ΓòÉΓòÉΓòÉ
Specifies the information to send to the remote host. If you do not specify
this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> recv Subcommand ΓòÉΓòÉΓòÉ
The recv subcommand transfers a file from a remote host to your workstation.
The current settings for the type and struct subcommands are used with recv.
You can issue the recv subcommand with the abbreviation rec.
ΓöÇΓöÇrecvΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsource_fileΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
Γö£ΓöÇdestination_fileΓöÇΓöñ
Γö£ΓöÇconΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇprnΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> source_file ΓòÉΓòÉΓòÉ
Specifies the name of the file on the remote host that is to be transferred to
your workstation. If you do not specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> destination_file ΓòÉΓòÉΓòÉ
Specifies the name given to the source_file when it is stored on your
workstation. If destination_file is not specified, the source_file name is used
and changed, if necessary, to conform to OS/2 file-naming conventions. If the
name of the file being received is the same as a file that already exists on
your workstation, your existing file is overwritten by the incoming file,
unless runique is set to on. If runique is set to on, a unique file name is
created for the incoming file, and your existing file is unchanged. If you are
unsure whether runique is set to on, use the status subcommand to check the
setting.
ΓòÉΓòÉΓòÉ <hidden> con ΓòÉΓòÉΓòÉ
Specifies that the file is to be displayed on your screen.
ΓòÉΓòÉΓòÉ <hidden> prn ΓòÉΓòÉΓòÉ
Specifies that the file is to be sent to a printer or special device.
ΓòÉΓòÉΓòÉ <hidden> remotehelp Subcommand ΓòÉΓòÉΓòÉ
The remotehelp subcommand identifies the services and their respective syntax
specifications. You can issue the remotehelp subcommand with the abbreviation
rem.
ΓöÇΓöÇremotehelpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> command ΓòÉΓòÉΓòÉ
The command parameter identifies the host command for which you want to view
help information.
ΓòÉΓòÉΓòÉ <hidden> rename Subcommand ΓòÉΓòÉΓòÉ
The rename subcommand renames a file on the remote host. You can issue the
rename subcommand with the abbreviation ren.
ΓöÇΓöÇrenameΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇoldnameΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇnewnameΓöÇΓöÿ
If you do not specify either of these parameters, FTP will prompt you for them.
ΓòÉΓòÉΓòÉ <hidden> oldname ΓòÉΓòÉΓòÉ
Specifies the current name of a file in the working directory of the remote
host.
ΓòÉΓòÉΓòÉ <hidden> newname ΓòÉΓòÉΓòÉ
Specifies the new name for the file. If the file name specified by the newname
already exists, an error message is displayed.
ΓòÉΓòÉΓòÉ <hidden> reset Subcommand ΓòÉΓòÉΓòÉ
The reset subcommand clears the reply queue and resets the command reply
sequencing between the local processor and the remote server. You can issue the
reset subcommand with the abbreviation res.
ΓöÇΓöÇresetΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> rmdir Subcommand ΓòÉΓòÉΓòÉ
The rmdir subcommand removes a directory from the remote host. You can issue
the rmdir subcommand with the abbreviation rm.
ΓöÇΓöÇrmdirΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇdirectoryΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> directory ΓòÉΓòÉΓòÉ
Specifies the directory that you want to remove from the remote host. If you do
not specify a directory, FTP prompts you for one.
ΓòÉΓòÉΓòÉ <hidden> runique Subcommand ΓòÉΓòÉΓòÉ
The runique subcommand toggles the creation of unique file names for local
destination files during the get, mget, and recv operations. The initial
setting for runique is off.
If runique is set to off, FTP will overwrite existing files. If runique is set
to on, FTP will not overwrite existing files. You can issue the runique
subcommand with the abbreviation ru.
ΓöÇΓöÇruniqueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> send Subcommand ΓòÉΓòÉΓòÉ
The send subcommand transfers a file from your workstation to a remote host.
Using the send subcommand is the same as issuing the put subcommand.
ΓöÇΓöÇsendΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsource_fileΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
Γö£ΓöÇdestination_fileΓöÇΓöñ
Γö£ΓöÇconΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇprnΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> source_file ΓòÉΓòÉΓòÉ
Specifies the name of the file on your workstation that is to be transferred to
the remote host. If you do not specify this value, FTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> destination_file. ΓòÉΓòÉΓòÉ
Specifies the name given to the source_file when it is stored on the remote
host. If destination_file is not specified, the source_file name is used and
changed, if necessary, to conform to OS/2 file-naming conventions. If the name
of the file being received is the same as a file that already exists on the
remote host, the existing file is overwritten by the incoming file, unless
sunique is on. If sunique is on, a unique file name is created for the incoming
file, and the existing file is unchanged.
ΓòÉΓòÉΓòÉ <hidden> con ΓòÉΓòÉΓòÉ
Specifies that the file is to be displayed on the server screen or console.
ΓòÉΓòÉΓòÉ <hidden> prn ΓòÉΓòÉΓòÉ
Specifies that the file is to be sent to a destination printer or special
device.
ΓòÉΓòÉΓòÉ <hidden> sendport Subcommand ΓòÉΓòÉΓòÉ
The sendport subcommand toggles the use of FTP PORT commands. The initial
setting for sendport is to use PORT commands. You can issue the sendport
subcommand with the abbreviation sendp.
ΓöÇΓöÇsendportΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> site Subcommand ΓòÉΓòÉΓòÉ
The site subcommand sends service-specific information to a remote host. You
can issue the site subcommand with the abbreviation si.
ΓöÇΓöÇsiteΓöÇΓöÇΓöÇparametersΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> parameters ΓòÉΓòÉΓòÉ
Specifies the service-specific information. To identify services and their
respective syntax specifications, issue the remotehelp subcommand.
ΓòÉΓòÉΓòÉ <hidden> status Subcommand ΓòÉΓòÉΓòÉ
The status subcommand displays the following information:
Connection status
Transfer mode
Transfer type
Form
Structure
Flags
You can issue the status subcommand with the abbreviation sta.
ΓöÇΓöÇstatusΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> struct Subcommand ΓòÉΓòÉΓòÉ
The struct subcommand specifies the file transfer structure. You can issue the
struct subcommand with the abbreviation str.
ΓöÇΓöÇstructΓöÇΓöÇΓö¼ΓöÇfileΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇrecordΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> file ΓòÉΓòÉΓòÉ
Specifies a file structure that is a continuous sequence of data bytes. This
structure is supported for both ASCII and binary file transfer types.
ΓòÉΓòÉΓòÉ <hidden> record ΓòÉΓòÉΓòÉ
Specifies a file structure that is not currently supported by TCP/IP.
ΓòÉΓòÉΓòÉ <hidden> sunique Subcommand ΓòÉΓòÉΓòÉ
The sunique subcommand toggles the creation of unique file names for the
destination files during put, mput, and send operations. The initial setting of
sunique is off.
If sunique is off, FTP will overwrite existing files. If sunique is on, FTP
will not overwrite existing files. You can issue the sunique subcommand with
the abbreviation su.
ΓöÇΓöÇsuniqueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> trace Subcommand ΓòÉΓòÉΓòÉ
The trace subcommand toggles the flag that determines whether transmitted
packets are traced. The initial setting for trace is off. You can issue the
trace subcommand with the abbreviation tr.
ΓöÇΓöÇtraceΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> type Subcommand ΓòÉΓòÉΓòÉ
The type subcommand sets the file transfer type. You can issue the type
subcommand with the abbreviation ty.
ΓöÇΓöÇtypeΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇasciiΓöÇΓöÇΓöñ
ΓööΓöÇbinaryΓöÇΓöÿ
The setting that you specify will remain in effect until you either change it
or quit FTP. If you specify type without a parameter, FTP will display a
message indicating the current transfer type.
ΓòÉΓòÉΓòÉ <hidden> ascii ΓòÉΓòÉΓòÉ
Specifies the file transfer type as ASCII. ASCII is the initial setting for
FTP's file transfer type. Specifying the type subcommand with the ascii
parameter is the same as issuing the ascii subcommand.
ΓòÉΓòÉΓòÉ <hidden> binary ΓòÉΓòÉΓòÉ
Specifies the file transfer type as binary (image). Specifying the type
subcommand with the binary parameter is the same as issuing the binary
subcommand.
ΓòÉΓòÉΓòÉ <hidden> user Subcommand ΓòÉΓòÉΓòÉ
The user subcommand identifies you to the remote host. You can issue the user
subcommand with the abbreviation u.
ΓöÇΓöÇuserΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇuseridΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇpasswordΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> userid ΓòÉΓòÉΓòÉ
Specifies your name to the remote host.
ΓòÉΓòÉΓòÉ <hidden> password ΓòÉΓòÉΓòÉ
Specifies the password associated with your user ID.
ΓòÉΓòÉΓòÉ <hidden> verbose Subcommand ΓòÉΓòÉΓòÉ
The verbose subcommand toggles the flag that determines whether responses from
the FTP server are displayed. The initial setting for verbose is on. You can
issue the verbose subcommand with the abbreviation v.
ΓöÇΓöÇverboseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> ? Subcommand ΓòÉΓòÉΓòÉ
The ? subcommand displays help information for the FTP command shell. Using the
? subcommand is the same as issuing the help subcommand.
ΓöÇΓöÇ?ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies the subcommand for which you are requesting help.
ΓòÉΓòÉΓòÉ 10. ftpd Command ΓòÉΓòÉΓòÉ
The ftpd command uses the FTPD.EXE program to start the FTP server. It runs as
a task until you shut down the server.
ΓöÇΓöÇftpdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇp <portno>ΓöÇΓöÿ ΓööΓöÇ ΓöÇc <codepage>ΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -p <portno> ΓòÉΓòÉΓòÉ
Specifies the port that you want FTPD to use. If you omit this option, FTPD
uses its well-known port assignment.
ΓòÉΓòÉΓòÉ <hidden> -c <codepage> ΓòÉΓòÉΓòÉ
Specifies the ASCII codepage used by the remote host. If you do not specify a
codepage, the data is sent untranslated. The possible values are:
TCPDECMU for the DEC Multinational codepage
TCP8859 for ISO 8859 codepage
NONE for PC codepage 850
ΓòÉΓòÉΓòÉ 11. ftppm Command ΓòÉΓòÉΓòÉ
The ftppm command starts FTPPM, which transfers files between your workstation
and a remote host that is running an FTP server. You can use standard
Presentation Manager[*] input and output conventions in the FTPPM window.
ΓöÇftppmΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇuseridΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇpasswordΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇaccount_nameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> Presentation Manager ΓòÉΓòÉΓòÉ
Presentation Manager is a trademark of IBM Corporation.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
The first remote host to which you are connecting.
ΓòÉΓòÉΓòÉ <hidden> userid ΓòÉΓòÉΓòÉ
The name associated with you by the remote host to which you are establishing a
connection.
ΓòÉΓòÉΓòÉ <hidden> password ΓòÉΓòÉΓòÉ
The password for your user ID on the remote host.
ΓòÉΓòÉΓòÉ <hidden> account_name ΓòÉΓòÉΓòÉ
The account information required by the host.
ΓòÉΓòÉΓòÉ 12. host Command ΓòÉΓòÉΓòÉ
The host command translates a specified host name to its IP address, or
translates a specified IP address to its host name.
ΓöÇΓöÇhostΓöÇΓöÇΓö¼ΓöÇhost_nameΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇip_addrΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host_name ΓòÉΓòÉΓòÉ
The host name of the host whose IP address is to be translated.
ΓòÉΓòÉΓòÉ <hidden> ip_addr ΓòÉΓòÉΓòÉ
The IP address of the host whose host name is to be translated.
ΓòÉΓòÉΓòÉ 13. hostname Command ΓòÉΓòÉΓòÉ
The hostname command sends a request to the domain-name server to resolve your
host name from your internet address and displays the host name.
ΓöÇΓöÇhostnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 14. ifconfig Command ΓòÉΓòÉΓòÉ
The ifconfig command assigns an address to a network interface and configures
the network interface parameters.
The ifconfig command displays the current configuration for a network interface
when only an interface is supplied. If an address family is specified using af,
ifconfig reports only the details specific to that address family.
To receive help for the command syntax, use the ifconfig command alone, without
specifying an interface, address, or parameter.
ΓöîΓöÇmetric 0ΓöÇΓöÉ ΓöîΓöÇmtu 1500ΓöÇΓöÉ
ΓöÇΓöÇifconfigΓöÇΓöÇinterfaceΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇmetric nΓöÇΓöÿ ΓööΓöÇmtu nΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇ ΓöÇtrailersΓöÇΓöÉ ΓöîΓöÇarpΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇbridgeΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöñAddress FamilyΓö£ΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇtrailersΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇarpΓöÇΓöÿ ΓööΓöÇ ΓöÇbridgeΓöÇΓöÿ
ΓöîΓöÇsnapΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇbroadcast broadcast_addressΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇsnapΓöÇΓöÿ ΓööΓöÇ ΓöÇallrsΓöÇΓöÿ
ΓöîΓöÇ ΓöÇ802.3ΓöÇΓöÉ ΓöîΓöÇicmpredΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇ ΓöÇcanonicalΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ802.3ΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇicmpredΓöÇΓöÿ ΓööΓöÇcanonicalΓöÇΓöÇΓöÇΓöÿ
Address Family
ΓöîupΓöÇΓöÇΓöÉ
Γö£ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼Γö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö╝ΓöÇΓöÇΓöÇΓöÇΓö╝Γö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇafΓöÇΓöÿΓööaddressΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÿΓöödownΓöÿΓöönetmask maskΓöÿ
Γöödest_addressΓöÿ
ΓòÉΓòÉΓòÉ <hidden> interface ΓòÉΓòÉΓòÉ
The name of the interface you are configuring (lan0, lan1, lan2, lan3, lan4,
lan5, lan6, lan7, sl, x25, or lo).
Note: Specifying lo creates a local loopback interface. The local loopback
interface bypasses the network interface drivers to provide a direct internal
connection back to the internet protocol support. For example, if you type
ifconfig lo 2.2.2.2, you can use the address 2.2.2.2 as a local loopback.
ΓòÉΓòÉΓòÉ <hidden> metric n ΓòÉΓòÉΓòÉ
Sets the metric for the interface to n. The value for n is a number (1-15). The
default is 0 (directly connected). This routing metric is used by the Routing
Information Protocol (RIP).
The higher the metric, the greater the number of hops to the destination
network or host.
ΓòÉΓòÉΓòÉ <hidden> mtu n ΓòÉΓòÉΓòÉ
Sets the maximum transmission unit of the interface to n. The value n
represents a number. The default is 1500. Typical mtu settings are:
ADAPTER mtu SETTING
PC Network adapter 1462
Ethernet adapter on an IEEE[**] 802.3 network 1492
Token-Ring 6/4 Adapter/A card on a
16 megabyte token-ring 4400
X.25 coprocessor adapter 576
ΓòÉΓòÉΓòÉ <hidden> trailers ΓòÉΓòÉΓòÉ
Requests the use of trailer-link level encapsulation when sending.
For example, if a network interface supports trailers, the system, when
possible, encapsulates outgoing messages, which minimizes the number of
memory-to-memory copy operations that the receiver must perform.
On networks that support ARP, this parameter indicates that the system should
request that other systems use trailers when sending to this host. Trailer
encapsulations are sent to other hosts that have made such requests.
ΓòÉΓòÉΓòÉ <hidden> ** ΓòÉΓòÉΓòÉ
IEEE is a trademark of the Institute of Electrical and Electronics Engineers.
ΓòÉΓòÉΓòÉ <hidden> -trailers ΓòÉΓòÉΓòÉ
Disables trailer link level encapsulation. This is the default.
ΓòÉΓòÉΓòÉ <hidden> af ΓòÉΓòÉΓòÉ
Specifies the name of the address family supported.
Because an interface can receive transmissions in different protocols, with
each protocol requiring a separate naming scheme, you must specify the address
family. However, specifying the address family can change the interpretation of
the remaining parameters. The only address family currently supported is inet.
ΓòÉΓòÉΓòÉ <hidden> address ΓòÉΓòÉΓòÉ
Specifies the address assigned to a particular interface in the standard
dotted-decimal notation.
ΓòÉΓòÉΓòÉ <hidden> dest_address ΓòÉΓòÉΓòÉ
Specifies the address of the correspondent on the receiving end of a
point-to-point link.
ΓòÉΓòÉΓòÉ <hidden> up ΓòÉΓòÉΓòÉ
Enables an interface after the interface has been marked as being down with an
ifconfig statement.
Interfaces are automatically marked as being up when the first address is set
on an interface.
ΓòÉΓòÉΓòÉ <hidden> down ΓòÉΓòÉΓòÉ
Marks an interface as being down. When an interface is marked as being down,
the system does not attempt to transmit messages through that interface. In
some cases, the reception of messages is also disabled.
This action does not automatically disable routes using the interface.
ΓòÉΓòÉΓòÉ <hidden> netmask mask ΓòÉΓòÉΓòÉ
Specifies how much of the internet address to reserve for use as a subnetwork
address. This parameter is used for networks only.
For example, the subnetwork capability of TCP/IP divides a single network into
multiple logical networks. An organization can have a single internet network
address that is known to users outside the organization, but can configure its
internal network into different departmental subnetworks. The subnetwork
portion of an internet address is then divided into a subnetwork number and a
host number, for example:
network_number subnet_number host_number
where: .
network_number Is the network portion of the internet address
subnet_number Is the subnetwork portion of the local address
host_number Is the host portion of the local address
The mask value includes the network portion of the local address and the
subnetwork portion, which is taken from the host field of the address. The mask
can be specified as a single hexadecimal number with a leading X'0' or with a
dotted-decimal notation address.
The mask contains a 1 for each bit position of the 32-bit address that is to be
used for the network and subnetwork and a 0 for the bit position to be used by
the host. The mask should contain at least the standard network portion, but
the bits of the mask do not have to be contiguous. The subnetwork field should
be contiguous with the network portion.
ΓòÉΓòÉΓòÉ <hidden> arp ΓòÉΓòÉΓòÉ
Enables ARP in mapping between network level addresses and physical or station
addresses. This is the default.
ARP is currently used for mapping between internet addresses and Ethernet
addresses or IBM token-ring addresses.
ΓòÉΓòÉΓòÉ <hidden> -arp ΓòÉΓòÉΓòÉ
Disables ARP.
ΓòÉΓòÉΓòÉ <hidden> bridge ΓòÉΓòÉΓòÉ
Enables routing field support. This is the default.
ΓòÉΓòÉΓòÉ <hidden> -bridge ΓòÉΓòÉΓòÉ
Disables routing field support.
ΓòÉΓòÉΓòÉ <hidden> snap ΓòÉΓòÉΓòÉ
Sends token-ring headers with the extended snap format. This is the Institute
of Electrical and Electronic Engineers ( IEEE) standard and is necessary to
communicate with workstations using the extended snap format, such as AIX[*].
This is the default.
ΓòÉΓòÉΓòÉ <hidden> AIX ΓòÉΓòÉΓòÉ
AIX is a trademark of IBM Corporation.
ΓòÉΓòÉΓòÉ <hidden> -snap ΓòÉΓòÉΓòÉ
Does not send token-ring headers with the extended snap format.
ΓòÉΓòÉΓòÉ <hidden> -allrs ΓòÉΓòÉΓòÉ
Sets the token-ring broadcast indicator to single-route broadcast. The default
is all-routes broadcast. See the IBM LAN Technical Reference, SC30-3383, for
more information about all-routes and single-route broadcasting.
ΓòÉΓòÉΓòÉ <hidden> broadcast broadcast_address ΓòÉΓòÉΓòÉ
Specifies the address to use to represent broadcasts to the network. The
default broadcast address is an internet address with a local address that has
a value of all 1s.
ΓòÉΓòÉΓòÉ <hidden> -802.3 ΓòÉΓòÉΓòÉ
Disables IEEE 802.3. Enables Ethernet DIX 2. This is the default.
ΓòÉΓòÉΓòÉ <hidden> 802.3 ΓòÉΓòÉΓòÉ
Enables IEEE 802.3.
ΓòÉΓòÉΓòÉ <hidden> icmpred ΓòÉΓòÉΓòÉ
Allows TCP/IP to add routes obtained by ICMP redirects. This is the default.
ΓòÉΓòÉΓòÉ <hidden> -icmpred ΓòÉΓòÉΓòÉ
Prevents TCP/IP from adding routes obtained by ICMP redirects.
ΓòÉΓòÉΓòÉ <hidden> canonical ΓòÉΓòÉΓòÉ
Mac addresses in address resolution protocol packets on this token-ring network
are in the canonical IEEE 802.5 form.
ΓòÉΓòÉΓòÉ <hidden> -canonical ΓòÉΓòÉΓòÉ
Mac addresses in address resolution protocol packets on this token-ring network
are in the noncanonical format. This is the default.
ΓòÉΓòÉΓòÉ 15. inetd Command ΓòÉΓòÉΓòÉ
The inetd command enables a super server that allows you to start more than one
server from a single OS/2 session and use a specific server when needed. The
inetd command supports the following servers:
FTPD RSHD
LPD TELNETD
REXECD TFTPD
Note: INETD will start the servers listed in the INETD.LST file in the ETC
subdirectory. To create or modify the INETD.LST file, use the autostart pages
of the TCP/IP configuration notebook. The tcpipcfg command opens the
configuration notebook.
ΓöÇΓöÇinetdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 16. ipformat Command ΓòÉΓòÉΓòÉ
The ipformat command tries to format the IPTRACE.DMP and the SLIPTRC.DMP files
into a user-readable format and display it to the screen. You can redirect the
output to a file for browsing with a editor. If ipformat cannot determine what
type of packet was received, a HEX representation of the data is displayed.
Ipformat will separate the IP, TCP, UDP, and ICMP layers. The rest of the
packet will be displayed as HEX output.
ΓöîΓöÇ -f IPTRACE.DMPΓöÇΓöÉ
ΓöÇΓöÇipformatΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇaΓöÇΓöÿ ΓööΓöÇ ΓöÇdΓöÇΓöÿ ΓööΓöÇ ΓöÇf filenameΓöÇΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇhΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇnΓöÇΓöÿ ΓööΓöÇ ΓöÇs hwaddressΓöÇΓöÿ ΓööΓöÇ>filenameΓöÇΓöÿ
Displaying ipformat Help
ΓöÇΓöÇipformatΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -a ΓòÉΓòÉΓòÉ
Do not format ARP or RARP packets.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Do not display the data portion of a packet.
ΓòÉΓòÉΓòÉ <hidden> -f filename ΓòÉΓòÉΓòÉ
Specifies the input fine name. The default is IPTRACE.DMP.
ΓòÉΓòÉΓòÉ <hidden> -h ΓòÉΓòÉΓòÉ
Display the raw data packet after the formatted information.
ΓòÉΓòÉΓòÉ <hidden> -s hwaddress ΓòÉΓòÉΓòÉ
Format data only for the specified hardware address. Replace hwaddress with the
12-digit hexadecimal address for the Ethernet or Token-Ring adapter. You can
use the NETSTAT -n command to display this address.
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Do not display hexadecimal data for unknown data type.
ΓòÉΓòÉΓòÉ <hidden> > filename ΓòÉΓòÉΓòÉ
Redirect the output to the specified file.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Display help information.
ΓòÉΓòÉΓòÉ 17. ipgate Command ΓòÉΓòÉΓòÉ
The ipgate command is used to enable or disable IP forwarding when TCP/IP is
acting as an IP router.
ΓöÇΓöÇipgateΓöÇΓöÇΓö¼ΓöÇonΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇoffΓöÇΓöÿ
Displaying ipgate Help
ΓöÇΓöÇipgateΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> on ΓòÉΓòÉΓòÉ
Enables the forwarding of IP packets.
ΓòÉΓòÉΓòÉ <hidden> off ΓòÉΓòÉΓòÉ
Disables the forwarding of IP packets.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of parameters.
ΓòÉΓòÉΓòÉ 18. ipparse Command ΓòÉΓòÉΓòÉ
The ipparse command reads the IPTRACE.DMP file and produces a HEX dump for the
screen. You can redirect this information to a file that you can browse with an
editor. There are no parameters associated with IPPARSE. Start ipparse from the
same directory where the IPTRACE.DMP file resides.
You can enter ipparse with no parameters to dump the data to the screen, or you
can enter ipparse < filename to dump the data to the named file.
ΓöÇΓöÇipparseΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ >filenameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> >filename ΓòÉΓòÉΓòÉ
Specifies a file into which the data is dumped.
ΓòÉΓòÉΓòÉ 19. iptrace Command ΓòÉΓòÉΓòÉ
The iptrace command will trace all packets received from and sent to the
Ethernet or or Token-Ring adapter. There are no parameters associated with
iptrace. The data is written to IPTRACE.DMP in the directory from which iptrace
was started. To stop iptrace, press the Ctrl-c keys. Because IPTRACE will
record all traffic sent and received, the IPTRACE.DMP file can grow quite
large. There is no error checking to see if there is enough hard disk space
available to continue recording the information. You should use iptrace in a
limited fashion so that it does not impact the performance of the workstation
where it is being run. iptrace is not a network monitor. It can trace only data
received by and sent from the adapter. Also, iptrace does not provide a time
stamp: it does not record when the packet was sent or received. After you start
iptrace, it traces all adapters at the workstation. You can not select one
adapter when several are installed.
ΓöÇΓöÇiptraceΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 20. lamail Command ΓòÉΓòÉΓòÉ
The lamail command starts the mail handling system that views, creates and
sends, and organizes mail into mail folders.
ΓöÇΓöÇlamailΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 21. ln Command ΓòÉΓòÉΓòÉ
The ln command is a network file support [**] (NFS[**]) command that is used to
create symbolic links on an NFS-mounted drive. You can define links (or
pointers) to other files or directories elsewhere within a directory structure.
The source file and the link must both reside on the same NFS-mounted drive.
ΓöîΓöÇcurrent_drive:ΓöÇΓöÉ
ΓöÇΓöÇlnΓöÇΓöÇΓö¼ΓöÇ ΓöÇdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇlink_nameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsource_nameΓöÇΓöÿ ΓööΓöÇdrive_letter:ΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> NFS and network file system ΓòÉΓòÉΓòÉ
NFS and network file system are trademarks of Sun Microsystems, Inc.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Deletes a link.
ΓòÉΓòÉΓòÉ <hidden> source_name ΓòÉΓòÉΓòÉ
Specifies the name of the file or directory to which you are creating a link.
ΓòÉΓòÉΓòÉ <hidden> drive_letter ΓòÉΓòÉΓòÉ
Specifies the mounted NFS drive where the link exists. The default is the
current drive.
ΓòÉΓòÉΓòÉ <hidden> link_name ΓòÉΓòÉΓòÉ
Specifies the name of the link to be created or deleted.
ΓòÉΓòÉΓòÉ 22. lpd Command ΓòÉΓòÉΓòÉ
The lpd command starts the LPR server, LPD, which provides the print spooling
service.
ΓöÇΓöÇlpdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇcΓöÇΓöÿ ΓööΓöÇ ΓöÇbΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ ΓööΓöÇ ΓöÇsΓöÇΓöÿ ΓööΓöÇ ΓöÇfΓöÇΓöÿ
ΓööΓöÇbannerΓöÇΓöÿ
Displaying lpd Help
ΓöÇΓöÇlpdΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ
Prevents printing of the control file.
ΓòÉΓòÉΓòÉ <hidden> -b banner ΓòÉΓòÉΓòÉ
Prints either a specific banner or none at all. banner is the optional file
containing the copyright information to be printed. If you specify a banner
file, that file is used as the banner. If you do not specify a banner file, a
banner is not printed.
If you specify a banner file with the -b parameter, the following keywords can
be used to display specific job information.
Keyword Description
%H% Name of the host that originated the print job
%U% Name of the user that originated the print job
%J% Name of the print job
%C% Class of the print job
ΓòÉΓòÉΓòÉ <hidden> -s ΓòÉΓòÉΓòÉ
Causes LPD to validate client requests based on the port addresses. According
to RFC 1179, all line printer requests should come from clients on a port
within the range of 721 to 731. However, because some clients do not support
this range, the default does not verify that the client is connecting from a
valid port within this range.
ΓòÉΓòÉΓòÉ <hidden> -f ΓòÉΓòÉΓòÉ
Changes the default file format from binary to text.
When a client sends a print job to an LPD server, the client can specify that
the job is of a particular file format.
LPD recognizes two file formats:
Binary
Text
When LPD receives a binary file, the file is sent as is directly to the
specified queue for printing. If the file received is a text file, LPD first
converts each line feed (LF) to a carriage return line feed (CRLF) pair. The
file is then sent to the specified queue.
If a client fails to specify a file format, or if a client specifies a format
other than binary or text, LPD treats the job as if it were binary. To change
the default file format from binary to text, use the -f parameter on the LPD
command line.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 23. lpq Command ΓòÉΓòÉΓòÉ
The lpq command queries jobs that are in the queue of a remote printer attached
to a network host that provides print spooling services.
ΓöÇΓöÇlpqΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ
ΓööΓöÇ ΓöÇlΓöÇΓöÿ ΓööΓöÇ ΓöÇp printerΓöÇΓöÿ ΓööΓöÇ ΓöÇs serverΓöÇΓöÿ ΓööΓöÇjoblistΓöÇΓöÿ
Displaying lpq help
ΓöÇΓöÇlpqΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -l ΓòÉΓòÉΓòÉ
If -l is not specified, LPQ requests short output from the server.
ΓòÉΓòÉΓòÉ <hidden> -p printer ΓòÉΓòÉΓòÉ
Specifies the name of the printer to query. If the -p parameter is omitted, LPQ
looks at environment variable LPR_PRINTER for the corresponding value.
ΓòÉΓòÉΓòÉ <hidden> -s server ΓòÉΓòÉΓòÉ
Specifies the name or internet address of a network host with print spooling
capabilities.
If a print server is not specified on the command line, LPQ looks at
environment variable LPR_SERVER for the corresponding value and uses that value
as the print server.
If a print server is not specified with the lpq command or defined in the
environment variable LPR_SERVER, LPQ displays an error message and ends.
ΓòÉΓòÉΓòÉ <hidden> joblist ΓòÉΓòÉΓòÉ
A list of job identifiers for which the information is to be displayed. If this
value is not specified, the default is to return information about all jobs
queued on the specified printer.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 24. lpr Command ΓòÉΓòÉΓòÉ
The lpr command allows you to transfer the contents of a file on your
workstation to a network host that provides print spooling services.
ΓöîΓöÇ ΓöÇr 3ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇ ΓöÇq 10ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇlprΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇ ΓöÇbΓöÇΓöñ ΓööΓöÇ ΓöÇnΓöÇΓöÿ ΓööΓöÇ ΓöÇr retriesΓöÇΓöÿ ΓööΓöÇ ΓöÇq secondsΓöÇΓöÿ
ΓööΓöÇ ΓöÇfΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇfilenameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇp printerΓöÇΓöÿ ΓööΓöÇ ΓöÇs serverΓöÇΓöÿ
Displaying lpr Help
ΓöÇΓöÇlprΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Specifies that the data is interpreted as binary by the LPR server, LPD.
ΓòÉΓòÉΓòÉ <hidden> -f ΓòÉΓòÉΓòÉ
When the print server is running on a UNIX[**] system, the -f parameter formats
the file using the UNIX pr command. When the print server is running under
OS/2, LPR passes the file through unchanged.
ΓòÉΓòÉΓòÉ <hidden> UNIX ΓòÉΓòÉΓòÉ
UNIX is a trademark of UNIX System Laboratories, Inc.
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Displays no messages unless an error occurs.
ΓòÉΓòÉΓòÉ <hidden> -r retries ΓòÉΓòÉΓòÉ
Sets the number of retries (0-5). The default is 3.
ΓòÉΓòÉΓòÉ <hidden> -q seconds ΓòÉΓòÉΓòÉ
Sets the retry delay in seconds. The default is 10.
ΓòÉΓòÉΓòÉ <hidden> -p printer ΓòÉΓòÉΓòÉ
Specifies the name of the printer to which the file is sent. If the -p
parameter is omitted, LPR looks at environment variable LPR_PRINTER for the
corresponding value.
ΓòÉΓòÉΓòÉ <hidden> -s server ΓòÉΓòÉΓòÉ
Specifies the name or internet address of a network host with print spooling
capabilities.
If a print server is not specified on the command line, LPR looks at
environment variable LPR_SERVER for the corresponding value and uses that value
as the print server.
If a print server is not specified with the lpr command or defined in the
environment variable, LPR displays an error message and ends.
ΓòÉΓòÉΓòÉ <hidden> filename ΓòÉΓòÉΓòÉ
Specifies the name of the file to be sent to the printer.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 25. lprm Command ΓòÉΓòÉΓòÉ
The lprm command allows you to remove jobs in the queue on a remote printer
attached to a network host that provides print spooling services.
ΓöÇlprmΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ
ΓööΓöÇ ΓöÇa agentΓöÇΓöÿ ΓööΓöÇ ΓöÇp printerΓöÇΓöÿ ΓööΓöÇ ΓöÇs serverΓöÇΓöÿ ΓööΓöÇjoblistΓöÇΓöÿ
Displaying lprm Help
ΓöÇΓöÇlprmΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -a agent ΓòÉΓòÉΓòÉ
Specifies an agent name to send to the server. If an agent is not specified,
LPRM will send the value of the USER environment variable followed by @hostname
(where hostname is the symbolic name or internet address of your host).
ΓòÉΓòÉΓòÉ <hidden> -p printer ΓòÉΓòÉΓòÉ
Specifies the name of the printer from which you are trying to delete a job. If
the -p parameter is omitted, LPRM looks at the environment variable LPR_PRINTER
for the corresponding value.
ΓòÉΓòÉΓòÉ <hidden> -s server ΓòÉΓòÉΓòÉ
Specifies the name or internet address of the network host with print spooling
capabilities.
If a print server is not specified on the command line, LPRM looks at
environment variable LPR_SERVER for the corresponding value and uses that value
as the print server.
If a printer server is neither specified with the lprm command nor defined in
the environment variable, LPRM displays an error message and ends.
ΓòÉΓòÉΓòÉ <hidden> joblist ΓòÉΓòÉΓòÉ
Specifies a list of job identifiers for the jobs to be removed from the remote
queue. If this value is not specified, the default is to remove the current job
in the remote queue.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 26. lprmon Command ΓòÉΓòÉΓòÉ
The lprmon command starts LPRMON, a parallel device monitor that sets up your
workstation to automatically send data to a remote LPR server. With this setup,
you can print to an LPR server without an application using the Line Printer
Protocol directly.
ΓöîΓöÇ ΓöÇr 3ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇ ΓöÇq 10ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇlprmonΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇ
Γö£ΓöÇ ΓöÇbΓöÇΓöñ ΓööΓöÇ ΓöÇnΓöÇΓöÿ ΓööΓöÇ ΓöÇr retriesΓöÇΓöÿ ΓööΓöÇ ΓöÇq secondsΓöÇΓöÿ
ΓööΓöÇ ΓöÇfΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇdevicenameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇp printerΓöÇΓöÿ ΓööΓöÇ ΓöÇs serverΓöÇΓöÿ
Displaying lprmon Help
ΓöÇΓöÇlprmonΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Specifies that the data is interpreted as binary by the server, LPD.
ΓòÉΓòÉΓòÉ <hidden> -f ΓòÉΓòÉΓòÉ
When the print server is running on a UNIX system, the -f parameter formats the
file using the UNIX pr command. When the print server is running under OS/2,
LPD passes the file through unchanged.
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Disables the beep that occurs when there is an error.
ΓòÉΓòÉΓòÉ <hidden> -r retries ΓòÉΓòÉΓòÉ
Sets the number of retries (0-5). The default is 3.
ΓòÉΓòÉΓòÉ <hidden> -q seconds ΓòÉΓòÉΓòÉ
Sets retry delay in seconds. The default is 10.
ΓòÉΓòÉΓòÉ <hidden> -p printer ΓòÉΓòÉΓòÉ
Specifies the name of the printer to which the file is sent. If the -p
parameter is omitted, LPRMON looks at environment variable LPR_PRINTER for the
corresponding value.
ΓòÉΓòÉΓòÉ <hidden> -s server ΓòÉΓòÉΓòÉ
Specifies the name or internet address of a network host with print spooling
capabilities.
If a print server is not specified on the command line, LPRMON looks at
environment variable LPR_SERVER for the corresponding value and uses that value
as the print server.
If a print server is not specified with the lprmon command or defined in the
environment variable, LPRMON displays an error message and ends.
ΓòÉΓòÉΓòÉ <hidden> devicename ΓòÉΓòÉΓòÉ
Specifies the parallel port for LPRMON to monitor. Data sent to this port is
then redirected to a remote LPR server. This must be specified as lptn, where n
is a number (1-3).
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 27. lprportd Command ΓòÉΓòÉΓòÉ
Use the lprportd command to start LPD port support. This starts LPRPORTD.EXE
which must be running before you can print to an LPD port icon.
ΓöÇΓöÇlprportdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 28. mkfontdr Command ΓòÉΓòÉΓòÉ
The mkfontdr command creates a FONTS.DIR file that the server uses to translate
font designations to font file names.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇmkfontdrΓöÇΓöÇΓöÇΓöÇdirectoryΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> directory ΓòÉΓòÉΓòÉ
The name of the directory in which the fonts reside.
ΓòÉΓòÉΓòÉ 29. mount Command ΓòÉΓòÉΓòÉ
The mount command is used to mount a directory on an NFS server as a local
drive. The server must authorize the client for access before the client can
mount a directory.
ΓöÇΓöÇmountΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇcΓöÇΓöÿ ΓööΓöÇ ΓöÇvpasswdΓöÇΓöÿ ΓööΓöÇ ΓöÇaΓöÇΓöÿ ΓööΓöÇ ΓöÇuuidΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇggidΓöÇΓöÿ ΓööΓöÇ ΓöÇlloginidΓöÇΓöÿ ΓööΓöÇΓöÇ ΓöÇppasswdΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇsΓöÇΓöÿ
ΓöÇΓöÇdrive_letterΓöÇΓöÇhost_name:exported_file_systemΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Displaying mount Help
ΓöÇΓöÇmountΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ
Removes carriage returns when writing to remote drives. The -c parameter is
used to write to text files on operating systems, such as UNIX, that do not
understand carriage returns. Do not use this option to write binary files to a
mounted file system.
ΓòÉΓòÉΓòÉ <hidden> -vpasswd ΓòÉΓòÉΓòÉ
Causes NFS to assume this is a VM server and prompts you for your VM password
if you do not specify a password.
ΓòÉΓòÉΓòÉ <hidden> -a ΓòÉΓòÉΓòÉ
Maps the OS/2 archive bit to the NFS group execute bit.
ΓòÉΓòÉΓòÉ <hidden> -uuid ΓòÉΓòÉΓòÉ
Specifies the user ID (UID).
ΓòÉΓòÉΓòÉ <hidden> -ggid ΓòÉΓòÉΓòÉ
Specifies the group ID (GID).
ΓòÉΓòÉΓòÉ <hidden> -lloginid ΓòÉΓòÉΓòÉ
Specifies the login ID for PCNFSD.
ΓòÉΓòÉΓòÉ <hidden> -ppasswd ΓòÉΓòÉΓòÉ
Specifies password for PCNFSD.
ΓòÉΓòÉΓòÉ <hidden> drive_letter ΓòÉΓòÉΓòÉ
Specifies the drive you use to access the mounted file system.
ΓòÉΓòÉΓòÉ <hidden> -s ΓòÉΓòÉΓòÉ
Specifies that file sharing and record locking requests are to be sent to the
NFS server.
ΓòÉΓòÉΓòÉ <hidden> host_name ΓòÉΓòÉΓòÉ
Specifies the host name of the NFS server to be used as a remote resource.
ΓòÉΓòÉΓòÉ <hidden> exported_file_system ΓòÉΓòÉΓòÉ
Specifies the file system that the NFS server has exported to the local host. A
standard format for the exported file system exists, but other formats can be
used depending on the server. The exported_file_system string is passed to the
server untouched. This string can specify information such as user IDs,
passwords, access type, and a mount point. exported_file_system must be the
last parameter specified on the mount command.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 30. mvslogin Command ΓòÉΓòÉΓòÉ
The mvslogin command authenticates an NFS client's access to a data set on a
specific MVS NFS server. To access a data set, you must issue the mvslogin
command, which sends your password to the server, before accessing files on the
corresponding mounted file system.
ΓöÇΓöÇmvsloginΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇ ΓöÇpΓöÇΓöÇΓöñ ΓööΓöÇ ΓöÇg groupΓöÇΓöÿ ΓööΓöÇ ΓöÇa accountΓöÇΓöÿ
Γö£ΓöÇ ΓöÇnΓöÇΓöÇΓöñ
ΓööΓöÇ ΓöÇpnΓöÇΓöÿ
ΓöÇΓöÇhost_nameΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇmvs_user_nameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -p ΓòÉΓòÉΓòÉ
Causes mvslogin to prompt you for your MVS password. The password is passed to
the mainframe to validate your access. The type of security procedures required
by your site determine whether this parameter is used.
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Prompts you for a new MVS password. The type of security procedures required by
your site determine whether this parameter is used.
ΓòÉΓòÉΓòÉ <hidden> -pn ΓòÉΓòÉΓòÉ
Causes a prompt for the user's current password and then causes two prompts for
the user's new password. The type of security procedures required by the site
determine whether this parameter is used.
ΓòÉΓòÉΓòÉ <hidden> -g group ΓòÉΓòÉΓòÉ
Specifies a group name string, which is passed to the mainframe for accounting
purposes. The maximum length for this string is 8 characters.
ΓòÉΓòÉΓòÉ <hidden> -a account ΓòÉΓòÉΓòÉ
Specifies an account string, which is passed to the mainframe for accounting
purposes. The maximum length for this string is 16 characters.
ΓòÉΓòÉΓòÉ <hidden> host_name ΓòÉΓòÉΓòÉ
Specifies the internet host name of the MVS NFS server.
ΓòÉΓòÉΓòÉ <hidden> mvs_user_name ΓòÉΓòÉΓòÉ
Specifies your ID, which the mainframe recognizes as a valid login. Your system
administrator determines what you must use.
ΓòÉΓòÉΓòÉ 31. mvslogut Command ΓòÉΓòÉΓòÉ
The mvslogut command ends the authenticated connection with the MVS NFS server
that was created using the mvslogin command. Issue the mvslogut command at the
close of each session.
ΓöÇΓöÇmvslogutΓöÇΓöÇhost_nameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> host_name ΓòÉΓòÉΓòÉ
Specifies the internet host name of the MVS NFS server.
ΓòÉΓòÉΓòÉ 32. netstat Command ΓòÉΓòÉΓòÉ
The netstat command displays the network status of the local workstation. The
netstat command provides information about TCP connections, user datagram
protocol (UDP) and internal protocol (IP) statistics, memory buffers, and
sockets.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇnetstatΓöÇΓöÇ ΓöÇ ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇ mΓöÇΓöñ
Γö£ΓöÇ tΓöÇΓöñ
Γö£ΓöÇ uΓöÇΓöñ
Γö£ΓöÇ iΓöÇΓöñ
Γö£ΓöÇ sΓöÇΓöñ
Γö£ΓöÇ rΓöÇΓöñ
Γö£ΓöÇ cΓöÇΓöñ
Γö£ΓöÇ nΓöÇΓöñ
Γö£ΓöÇ aΓöÇΓöñ
ΓööΓöÇ pΓöÇΓöÿ
Displaying netstat Help
ΓöÇΓöÇnetstatΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
More than one parameter can be specified with the netstat command line. Do not
enter spaces between the parameters when you use the netstat command with
multiple parameters. The netstat command ignores any entry after a space
ΓòÉΓòÉΓòÉ <hidden> m ΓòÉΓòÉΓòÉ
Displays information about memory buffer usage
ΓòÉΓòÉΓòÉ <hidden> t ΓòÉΓòÉΓòÉ
Displays information about TCP connections
ΓòÉΓòÉΓòÉ <hidden> u ΓòÉΓòÉΓòÉ
Displays information about UDP statistics
ΓòÉΓòÉΓòÉ <hidden> i ΓòÉΓòÉΓòÉ
Displays information about IP statistics
ΓòÉΓòÉΓòÉ <hidden> s ΓòÉΓòÉΓòÉ
Displays information about sockets
ΓòÉΓòÉΓòÉ <hidden> r ΓòÉΓòÉΓòÉ
Displays routing tables and corresponding network interfaces
ΓòÉΓòÉΓòÉ <hidden> c ΓòÉΓòÉΓòÉ
Displays information about internet control message protocol (ICMP) statistics
ΓòÉΓòÉΓòÉ <hidden> n ΓòÉΓòÉΓòÉ
Displays information about LAN interfaces
ΓòÉΓòÉΓòÉ <hidden> a ΓòÉΓòÉΓòÉ
Displays the address of the network interfaces
ΓòÉΓòÉΓòÉ <hidden> p ΓòÉΓòÉΓòÉ
Displays the contents of the address resolution protocol table
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information
ΓòÉΓòÉΓòÉ 33. nfsclean Command ΓòÉΓòÉΓòÉ
The nfsclean command is an NFS command that is used to detach all NFS mounted
drives from the file system.
ΓöÇΓöÇnfscleanΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
This command produces the same results as the following command:
unmount *
ΓòÉΓòÉΓòÉ 34. nfsctl Command ΓòÉΓòÉΓòÉ
The nfsctl command starts the OS/2 NFS client control program, NFSCTL. The
control program must be running before you can access an NFS server.
ΓöîΓöÇ ΓöÇb8192ΓöÇΓöÉ ΓöîΓöÇ ΓöÇr5ΓöÇΓöÇΓöÉ ΓöîΓöÇ ΓöÇt1ΓöÇΓöÉ ΓöîΓöÇ ΓöÇs4ΓöÇΓöÉ
ΓöÇΓöÇnfsctlΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇbnΓöÇΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇrnΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇtnΓöÇΓöÿ ΓööΓöÇ ΓöÇsnΓöÇΓöÿ
ΓöîΓöÇ ΓöÇwΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇpΓöÇΓöÿ ΓööΓöÇ ΓöÇcΓöÇΓöÿ ΓööΓöÇ ΓöÇzΓöÇΓöÿ ΓööΓöÇ ΓöÇiΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -bn ΓòÉΓòÉΓòÉ
Sets the transfer buffer size for read and write requests. This number must not
exceed 8192. The default value is 8192.
ΓòÉΓòÉΓòÉ <hidden> -rn ΓòÉΓòÉΓòÉ
Sets the number of remote procedure call (RPC) retries that the OS/2 NFS Client
sends to the server before ending the access attempt. The default value is 5.
ΓòÉΓòÉΓòÉ <hidden> -tn ΓòÉΓòÉΓòÉ
Sets the time-out value (in seconds) for an RPC request. The default value is
1.
ΓòÉΓòÉΓòÉ <hidden> -sn ΓòÉΓòÉΓòÉ
Defines the number of Biods that are to be started by OS/2 NFSCTL. The Biods
are a tool to allow parallel reads and writes to a file. The default value is
4.
ΓòÉΓòÉΓòÉ <hidden> -p ΓòÉΓòÉΓòÉ
Requests that the OS/2 NFSCTL use the Biods for both reading and writing.
ΓòÉΓòÉΓòÉ <hidden> -w ΓòÉΓòÉΓòÉ
Specifies that the OS/2 NFSCTL use the Biods for reading only. The -w parameter
is used with servers that do not support parallel writes to a file. -w is the
default.
ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ
Respects case when performing file name comparisons. If you do not specify this
parameter and if the first query fails, the OS/2 NFS Client will try the name
in uppercase. If this attempt also fails, the OS/2 NFS Client will try the name
in lowercase.
ΓòÉΓòÉΓòÉ <hidden> -z ΓòÉΓòÉΓòÉ
Respects file name case when creating files and directories. If you do note
specify this parameter, files and directories will be created in lowercase.
ΓòÉΓòÉΓòÉ <hidden> -i ΓòÉΓòÉΓòÉ
Specifies that the OS/2 NFS client does serial read/write requests instead of a
parallel read/write requests. This is equivalent to specifying the s0
parameter.
ΓòÉΓòÉΓòÉ 35. nfsd Command ΓòÉΓòÉΓòÉ
The nfsd command starts the NFS server. Verify that PORTMAP is running before
starting the NFS server. If PORTMAP is not running, type portmap at an OS/2
command prompt to start it.
ΓöÇΓöÇnfsdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 36. nfsdir Command ΓòÉΓòÉΓòÉ
The nfsdir command allows you to display a directory from an NFS-mounted drive.
Notes:
The output is a four-column wide listing of files.
No file sizes are shown.
This command works for a non-NFS drive also.
ΓöÇΓöÇnfsdirΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇdrive_letter:ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ ΓööΓöÇfilemaskΓöÇΓöÿ
ΓööΓöÇpathΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> drive_letter ΓòÉΓòÉΓòÉ
The drive you want to search.
ΓòÉΓòÉΓòÉ <hidden> path ΓòÉΓòÉΓòÉ
The path you want to search.
ΓòÉΓòÉΓòÉ <hidden> filemask ΓòÉΓòÉΓòÉ
The standard OS/2 file mask for displaying selected files
ΓòÉΓòÉΓòÉ 37. nfsstart Command ΓòÉΓòÉΓòÉ
The nfsstart command starts the OS/2 NFS client and automatically mounts
entries that are in the TCPIP\ETC\FSTAB file. You can use nfsstart with the
TCPIP\ETC\FSTAB file when you have a set of servers that you mount every day to
avoid mounting each one manually.
ΓöîΓöÇ ΓöÇb8192ΓöÇΓöÉ ΓöîΓöÇ ΓöÇr5ΓöÇΓöÇΓöÉ ΓöîΓöÇ ΓöÇt1ΓöÇΓöÉ
ΓöÇΓöÇnfsstartΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇetc_dirΓöÇΓöÿ ΓööΓöÇ ΓöÇbnΓöÇΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇrnΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇtnΓöÇΓöÿ
ΓöîΓöÇ ΓöÇs4ΓöÇΓöÉ ΓöîΓöÇ ΓöÇwΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇsnΓöÇΓöÿ ΓööΓöÇ ΓöÇpΓöÇΓöÿ ΓööΓöÇ ΓöÇcΓöÇΓöÿ ΓööΓöÇ ΓöÇzΓöÇΓöÿ ΓööΓöÇ ΓöÇiΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> etc_dir ΓòÉΓòÉΓòÉ
Specified the base directory for the FSTAB file. If you do not specify this
parameter, the value of the ETC environment variable is used.
ΓòÉΓòÉΓòÉ <hidden> -bn ΓòÉΓòÉΓòÉ
Sets the transfer buffer size for read and write requests. This number must not
exceed 8192. The default value is 8192.
ΓòÉΓòÉΓòÉ <hidden> -rn ΓòÉΓòÉΓòÉ
Sets the number of remote procedure call (RPC) retries that the OS/2 NFS Client
sends to the server before ending the access attempt. The default value is 5.
ΓòÉΓòÉΓòÉ <hidden> -tn ΓòÉΓòÉΓòÉ
Sets the time-out value (in seconds) for an RPC request. The default value is
1.
ΓòÉΓòÉΓòÉ <hidden> -sn ΓòÉΓòÉΓòÉ
Defines the number of Biods that are to be started by NFSCTL, the OS/2 NFS
client control program. The Biods are a tool to allow parallel reads and writes
to a file. The default value is 4.
ΓòÉΓòÉΓòÉ <hidden> -p ΓòÉΓòÉΓòÉ
Requests that the OS/2 NFS Client control program use the Biods for both
reading and writing.
ΓòÉΓòÉΓòÉ <hidden> -w ΓòÉΓòÉΓòÉ
Specifies that the OS/2 NFS Client control program use the Biods for reading
only. The -w parameter is used with any servers that do not support parallel
writes to a file. -w is the default.
ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ
Respects case when performing file name comparisons. If you do not specify this
parameter and if the first query fails, the OS/2 NFS Client will try the name
in uppercase. If this attempt also fails, the OS/2 NFS Client will try the name
in lowercase.
ΓòÉΓòÉΓòÉ <hidden> -z ΓòÉΓòÉΓòÉ
Respects file name case when creating files and directories. If you do not
specify parameter, files and directories will be created in lowercase.
ΓòÉΓòÉΓòÉ <hidden> -i ΓòÉΓòÉΓòÉ
Specifies that the OS/2 NFS Client does serial read/write requests instead of
parallel read/write requests. This is equivalent to specifying the -s0
parameter.
ΓòÉΓòÉΓòÉ 38. nr2 Command ΓòÉΓòÉΓòÉ
The nr2 command starts the OS/2 news reader to enable users to read or append
to the Internet news groups.
ΓöÇΓöÇnr2ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇserverΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöñ
Γöé Γö£ΓöÇ/ncΓöÇΓöñ Γöé
Γöé ΓööΓöÇ/uΓöÇΓöÇΓöÿ Γöé
Γö£ΓöÇ/sΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ΓööΓöÇ/ncΓöÇΓöÿ Γöé
Γö£ΓöÇ/ncΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇ/?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> server ΓòÉΓòÉΓòÉ
Specifies the host name or IP address of the news server to which you want to
connect.
ΓòÉΓòÉΓòÉ <hidden> /s ΓòÉΓòÉΓòÉ
Causes NewsReader/2 to prompt you to enter the host name or IP address of a
news server to access. The news server name that you enter here will replace
the name currently stored in NR2.INI.
ΓòÉΓòÉΓòÉ <hidden> /nc ΓòÉΓòÉΓòÉ
Starts NewsReader/2 without connecting to the news server. You can use this
option to import a NEWSRC file from a UNIX system. For example, you could
import a news file (NEWS.GRP) from a UNIX-format NEWSRC file in your ETC
subdirectory.
You can also use this option if you want to learn how to use NewsReader/2 but
do not have a news server.
ΓòÉΓòÉΓòÉ <hidden> /u ΓòÉΓòÉΓòÉ
Starts NewsReader/2 in update mode. In update mode, NewsReader/2 accesses the
news server and obtains an updated set of all news groups for later display in
your ALL GROUPS window.
ΓòÉΓòÉΓòÉ <hidden> /? ΓòÉΓòÉΓòÉ
Displays help for the nr2 command.
ΓòÉΓòÉΓòÉ 39. nslookup Command ΓòÉΓòÉΓòÉ
The nslookup command queries name servers in either interactive or
noninteractive mode.
nslookup in Interactive Mode
ΓöÇΓöÇnslookupΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇoptionΓöÇΓöÿ ΓööΓöÇ ΓöÇname_serverΓöÇΓöÿ
nslookup in Noninteractive Mode
ΓöÇΓöÇnslookupΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇhost_nameΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇoptionΓöÇΓöÿ ΓööΓöÇ ΓöÇname_serverΓöÇΓöÿ
Subcommands
ΓòÉΓòÉΓòÉ <hidden> -option ΓòÉΓòÉΓòÉ
Sets the default values for the query. You can specify any option that the set
subcommand for interactive mode uses. For example:
nslookup -querytype=HINFO -timeout=10
See The set Subcommand for a complete listing of these options.
ΓòÉΓòÉΓòÉ <hidden> host_name ΓòÉΓòÉΓòÉ
Specifies the name of the host to be queried.
ΓòÉΓòÉΓòÉ <hidden> -name_server ΓòÉΓòÉΓòÉ
Specifies the name server to be queried.
ΓòÉΓòÉΓòÉ <hidden> NSLOOKUP Subcommands ΓòÉΓòÉΓòÉ
The following subcommands can be used in the NSLOOKUP command shell.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöéexit Γöéfinger Γöéhelp Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéhost Γöéls Γöélserver Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéroot Γöéserver Γöéset Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéview Γöé? Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> exit Subcommand ΓòÉΓòÉΓòÉ
The exit subcommand ends the NSLOOKUP command shell.
ΓöÇΓöÇexitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> finger Subcommand ΓòÉΓòÉΓòÉ
The finger subcommand connects your programmable workstation with the finger
server on the current host. The current host is defined when a previous lookup
for a host is successful and address information is returned. For more
information on the returned address, see The set querytype and set type
Subcommands.
ΓöÇΓöÇfingerΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnameΓöÇΓöÿ ΓööΓöÇΓö¼ΓöÇ>ΓöÇΓöÇΓö¼ΓöÇΓöÇfilenameΓöÇΓöÿ
ΓööΓöÇ>>ΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> name ΓòÉΓòÉΓòÉ
Specifies that a list of logged-on users for the current host be returned.
Information about a particular user can be found by specifying the name of the
user as a parameter. The name is passed in the specified case to the query
host. Therefore, it is necessary to specify the name in the same case in which
the name appears on the host.
ΓòÉΓòÉΓòÉ <hidden> > ΓòÉΓòÉΓòÉ
Specifies that the output be directed to a file. Output goes to a file that you
can view later with the view subcommand.
ΓòÉΓòÉΓòÉ <hidden> >> ΓòÉΓòÉΓòÉ
Specifies that the output be directed to a file. Output is appended to a file
that you can view later with the view subcommand.
ΓòÉΓòÉΓòÉ <hidden> filename ΓòÉΓòÉΓòÉ
Specifies the name of the file where the output is to be written.
ΓòÉΓòÉΓòÉ <hidden> help Subcommand ΓòÉΓòÉΓòÉ
The help subcommand displays a summary of the nslookup subcommands. Using the
help subcommand is the same as issuing the ? subcommand.
ΓöÇΓöÇhelpΓöÇΓöÇsubcommandΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies an nslookup subcommand.
ΓòÉΓòÉΓòÉ <hidden> host Subcommand ΓòÉΓòÉΓòÉ
The host subcommand looks up information for the specified host using a server.
ΓöÇΓöÇhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇserverΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the name of a host.
If the host you specify is an internet address and the query type is A or PTR,
the name of the host is returned.
If the host you specify is a name and does not have a trailing period, the
default domain name is appended to the name. This behavior depends on the state
of the set options:
domain
srchlist
defname
search
If you specify a host with a trailing period, a search of the domains that are
not current is initiated.
ΓòÉΓòÉΓòÉ <hidden> server ΓòÉΓòÉΓòÉ
Specifies the server. If you do not specify a server, the current server will
be used.
ΓòÉΓòÉΓòÉ <hidden> ls Subcommand ΓòÉΓòÉΓòÉ
The ls subcommand lists the information available for a specific domain,
optionally creating or appending the information to a file. The initial output
contains host names and their internet addresses.
ΓöÇΓöÇlsΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇdomainΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇ ΓöÇt querytypeΓöÇΓöñ ΓööΓöÇΓö¼ΓöÇ>ΓöÇΓöÇΓö¼ΓöÇΓöÇfilenameΓöÇΓöÿ
Γö£ΓöÇ ΓöÇaΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ ΓööΓöÇ>>ΓöÇΓöÿ
Γö£ΓöÇ ΓöÇdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ ΓöÇhΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇ ΓöÇsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -t querytype ΓòÉΓòÉΓòÉ
Lists all records of the specified type.
ΓòÉΓòÉΓòÉ <hidden> -a ΓòÉΓòÉΓòÉ
Lists aliases of hosts in the domain. Using this option is the same as issuing
the set type subcommand with the CNAME parameter.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Lists all records for the domain. Using this option is the same as issuing the
set type subcommand with the ANY parameter.
ΓòÉΓòÉΓòÉ <hidden> -h ΓòÉΓòÉΓòÉ
Lists operating system information for the domain. Using this option is the
same as issuing the set type subcommand with the HINFO parameter.
ΓòÉΓòÉΓòÉ <hidden> -s ΓòÉΓòÉΓòÉ
Lists well-known services of hosts in the domain. When output is directed to a
file, hash marks are printed for each group of 50 records received from the
server. Using this option is the same as issuing the set type subcommand with
the WKS parameter.
ΓòÉΓòÉΓòÉ <hidden> domain ΓòÉΓòÉΓòÉ
Specifies the domain for which information is requested.
ΓòÉΓòÉΓòÉ <hidden> > ΓòÉΓòÉΓòÉ
Specifies that the output be directed to a file. Output goes to a file that you
can view later with the view subcommand.
ΓòÉΓòÉΓòÉ <hidden> >> ΓòÉΓòÉΓòÉ
Specifies that the output be directed to a file. Output is appended to a file
that you can view later with the view subcommand.
ΓòÉΓòÉΓòÉ <hidden> filename ΓòÉΓòÉΓòÉ
Specifies the name of the file where the output is to be written.
ΓòÉΓòÉΓòÉ <hidden> lserver Subcommand ΓòÉΓòÉΓòÉ
The lserver subcommand changes the default server.
ΓöÇΓöÇlserverΓöÇΓöÇnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> name ΓòÉΓòÉΓòÉ
Specifies the name of the server. If an authoritative answer is not found, the
names of servers that might provide the answer are returned.
ΓòÉΓòÉΓòÉ <hidden> root Subcommand ΓòÉΓòÉΓòÉ
The root subcommand changes the default server to the server for the root of
the domain-name space.
The current host is ns.nic.ddn.mil, but it can be changed using the set root
subcommand. Using the root command is the same as issuing the lserver
subcommand with the name server being ns.nic.ddn.mi.
ΓöÇΓöÇrootΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> server Subcommand ΓòÉΓòÉΓòÉ
The server subcommand changes the default server.
ΓöÇΓöÇserverΓöÇΓöÇnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> name ΓòÉΓòÉΓòÉ
Specifies the name of the server. If an authoritative answer is not found, the
names of servers that might provide the answer are returned.
ΓòÉΓòÉΓòÉ <hidden> set Subcommand ΓòÉΓòÉΓòÉ
The set subcommand changes internal state information that affects query
results. The following information can be set with the set subcommand.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöéall Γöéclass Γöéd2, nod2 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöédebug, nodebug Γöédefname, Γöédomain Γöé
Γöé Γöénodefname Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéignoretc, Γöéport Γöéquerytype, typeΓöé
Γöénoignoretc Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöérecurse, Γöéretry Γöéroot Γöé
Γöénorecurse Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöésearch, Γöésrchlist Γöétimeout Γöé
Γöénosearch Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöévc, novc Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> set all Subcommand ΓòÉΓòÉΓòÉ
Use the set all subcommand to print the current values of the frequently-used
options that set the internal-state variables. Information about the current
default server and host is also printed.
ΓöÇΓöÇsetΓöÇΓöÇallΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> set class Subcommand ΓòÉΓòÉΓòÉ
Use the set class subcommand to set the query class. The class specifies the
protocol group that is to be used for information. You can issue the class
parameter with the abbreviation cl.
ΓöîΓöÇinΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇclassΓöÇΓöÇ=ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇchaosΓöÇΓöÇΓöñ
Γö£ΓöÇhesiodΓöÇΓöñ
ΓööΓöÇanyΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> in ΓòÉΓòÉΓòÉ
Specifies the internet class. This value is the default.
ΓòÉΓòÉΓòÉ <hidden> chaos ΓòÉΓòÉΓòÉ
Specifies the chaos class.
ΓòÉΓòÉΓòÉ <hidden> hesiod ΓòÉΓòÉΓòÉ
Specifies the MIT Athena Hesiod(**) class.
ΓòÉΓòÉΓòÉ <hidden> MIT Athena Hesiod ΓòÉΓòÉΓòÉ
Project Athena is a trademark of Massachusetts Institute of Technology.
ΓòÉΓòÉΓòÉ <hidden> any ΓòÉΓòÉΓòÉ
Specifies any parameters.
ΓòÉΓòÉΓòÉ <hidden> set d2 and set nod2 Subcommands ΓòÉΓòÉΓòÉ
These subcommands start or end the exhaustive debugging mode. set d2 specifies
that the exhaustive debugging mode, which prints all the fields of every query
packet, is started. With set nod2, no printing occurs.
The default is nod2.
ΓöîΓöÇnod2ΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇd2ΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> set debug and set nodebug Subcommands ΓòÉΓòÉΓòÉ
These subcommands switch between the debug and nodebug mode. Debug mode prints
debugging information for each query packet sent to the server and the
resulting response. Nodebug mode does not print the debugging information. You
can issue the nodebug parameter with the abbreviation nodeb. You can issue the
debug parameter with the abbreviation deb.
The default is nodebug.
ΓöîΓöÇnodebugΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇdebugΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> set defname and set nodefname Subcommands ΓòÉΓòÉΓòÉ
The set defname subcommand appends the default domain name to a
single-component query (one that does not contain a period). You can issue the
defname parameter with the abbreviation def. You can issue the nodefname
parameter with the abbreviation nodef.
The default is defname.
ΓöîΓöÇdefnameΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnodefnameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> set domain Subcommand ΓòÉΓòÉΓòÉ
The set domain subcommand changes the name of the default domain. The domain
search list contains the parents of the default domain if it has at least two
components in its name.
For example, if the default domain is CC.Berkeley.EDU, the search list is
CC.Berkeley.EDU and Berkeley.EDU.
Use the set srchlist subcommand to specify a different list. Use the set all
subcommand to display the list. The default is the current value for the host
name found in \ETC\RESOLV. You can issue the domain parameter with the
abbreviation do.
ΓöÇΓöÇsetΓöÇΓöÇdomain=nameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> name ΓòÉΓòÉΓòÉ
Sets the default domain name to name. The default domain name is appended to a
lookup request, depending on the state of the defname and search options.
ΓòÉΓòÉΓòÉ <hidden> Set ignoretc and noignoretc Subcommands ΓòÉΓòÉΓòÉ
The set ignoretc subcommand handles truncated responses. You can issue the
ignoretc parameter with the abbreviation ig. You can issue the noignoretc
parameter with the abbreviation noig.
The default is ignoretc.
ΓöîΓöÇignoretcΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnoignoretcΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> set port Subcommand ΓòÉΓòÉΓòÉ
The set port subcommand specifies the port to access. You can change the
default TCP/UDP name server port to the value specified. You can issue the port
parameter with the abbreviation po.
ΓöîΓöÇport=53ΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇport=valueΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> value ΓòÉΓòÉΓòÉ
Specifies the port number. The default is 53.
ΓòÉΓòÉΓòÉ <hidden> set querytype and set type Subcommands ΓòÉΓòÉΓòÉ
These subcommands set the type of information returned by queries.
You can issue the querytype parameter with the abbreviation q. You can issue
the type parameter with the abbreviation t.
ΓöÇΓöÇsetΓöÇΓöÇΓö¼ΓöÇquerytypeΓöÇΓö¼ΓöÇΓöÇ=ΓöÇΓöÇΓö¼ΓöÇAΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇtypeΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ Γö£ΓöÇCNAMEΓöÇΓöñ
Γö£ΓöÇHINFOΓöÇΓöñ
Γö£ΓöÇMINFOΓöÇΓöñ
Γö£ΓöÇMXΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇNSΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇPTRΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇSOAΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇTXTΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇUINFOΓöÇΓöñ
ΓööΓöÇWKSΓöÇΓöÇΓöÇΓöÿ
For information about other types such as ANY, AXFR, MB, MD, MF, and NULL, see
RFC 1035.
ΓòÉΓòÉΓòÉ <hidden> A ΓòÉΓòÉΓòÉ
Indicates the Internet address of the host.
ΓòÉΓòÉΓòÉ <hidden> CNAME ΓòÉΓòÉΓòÉ
Indicates the canonical name for an alias.
ΓòÉΓòÉΓòÉ <hidden> HINFO ΓòÉΓòÉΓòÉ
Indicates operating system information.
ΓòÉΓòÉΓòÉ <hidden> MINFO ΓòÉΓòÉΓòÉ
Indicates the mailbox or mail list information.
ΓòÉΓòÉΓòÉ <hidden> MX ΓòÉΓòÉΓòÉ
Indicates the mail exchanger.
ΓòÉΓòÉΓòÉ <hidden> NS ΓòÉΓòÉΓòÉ
Indicates the name server for the named zone.
ΓòÉΓòÉΓòÉ <hidden> PTR ΓòÉΓòÉΓòÉ
Indicates a pointer to the host name if the query is an internet address. If
the query is not an Internet address, this is a pointer to other information.
ΓòÉΓòÉΓòÉ <hidden> SOA ΓòÉΓòÉΓòÉ
Indicates the domain's start of authority information.
ΓòÉΓòÉΓòÉ <hidden> TXT ΓòÉΓòÉΓòÉ
Indicates the text information.
ΓòÉΓòÉΓòÉ <hidden> UINFO ΓòÉΓòÉΓòÉ
Indicates the user information.
ΓòÉΓòÉΓòÉ <hidden> WKS ΓòÉΓòÉΓòÉ
Indicates the supported well-known services.
ΓòÉΓòÉΓòÉ <hidden> set recurse and set norecurse Subcommands ΓòÉΓòÉΓòÉ
The set recurse subcommand notifies the name server to perform a recursive
query, querying other servers if it does not have the information. The set
norecurse subcommand specifies that no recursive query will take place. You can
issue the recurse parameter with the abbreviation rec. You can issue the
norecurse parameter with the abbreviation norec.
The default is recurse.
ΓöîΓöÇrecurseΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnorecurseΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> set retry Subcommand ΓòÉΓòÉΓòÉ
The set retry subcommand sets the number of times to retry a request. When a
reply to a request is not received within the specified timeout period, the
timeout period is doubled and the request is resent. You can issue the retry
parameter with the abbreviation ret.
ΓöîΓöÇretry=4ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇretry=numberΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> number ΓòÉΓòÉΓòÉ
Specifies the number of times to retry a request. The default is 4.
ΓòÉΓòÉΓòÉ <hidden> set root Subcommand ΓòÉΓòÉΓòÉ
The set root subcommand changes the defined name of the root server. You can
issue the root parameter with the abbreviation ro.
ΓöîΓöÇroot=ns.nic.ddn.milΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇroot=hostΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the name of the host the root server is changed to. The default is
ns.nic.ddn.mil.
ΓòÉΓòÉΓòÉ <hidden> set search and set nosearch Subcommands ΓòÉΓòÉΓòÉ
The set search subcommand directs NSLOOKUP to append the domain names in the
domain search list to the query (reiterative searching) until an answer is
received. This search occurs when the lookup request contains at least one
period but does not end with a trailing period.
The set nosearch subcommand directs NSLOOKUP not to append the domain names in
the domain search list to the query.
You can issue the search parameter with the abbreviation sea. You can issue the
nosearch parameter with the abbreviation nosea.
The default is search.
ΓöîΓöÇsearchΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnosearchΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> set srchlist Subcommand ΓòÉΓòÉΓòÉ
The set srchlist subcommand changes the default domain name to the first name
specified and the domain search list to all the domains specified. You can
issue the srchlist parameter with the abbreviation srchl.
ΓöîΓöÇ/ΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇsetΓöÇΓöÇsrchlist=ΓöÇΓöÇΓöÇΓöÇnameΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> name ΓòÉΓòÉΓòÉ
Specifies a domain name. You can specify a maximum of six names, each separated
by a slash (/).
For example, to set the domain name to lcs.MIT.EDU, and the search list to
include ai.MIT.EDU, and MIT.EDU, as well as lcs.MIT.EDU, the subcommand is:
set srchlst=lcs.MIT.EDU/ai.MIT.EDU/MIT.EDU
This subcommand overrides the default domain name and search list of the set
domain subcommand. You can display the list with the set all subcommand. The
initial setting is the host name found in \ETC\RESOLV.
ΓòÉΓòÉΓòÉ <hidden> set timeout Subcommand ΓòÉΓòÉΓòÉ
The set timeout subcommand changes the number of seconds to wait before timing
out on a request. Each retry doubles the timeout period. You can issue the
timeout parameter with the abbreviation ti.
ΓöîΓöÇtimeout=5ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇtimeout=numberΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> number ΓòÉΓòÉΓòÉ
Specifies the length of time, in seconds. The default is 5.
ΓòÉΓòÉΓòÉ <hidden> set vc and set novc Subcommands ΓòÉΓòÉΓòÉ
The set vc subcommand directs NSLOOKUP to use a virtual circuit (TCP
connection) to send requests to the server. The set novc subcommand directs
NSLOOKUP not to use a virtual circuit to send requests to the server. You can
issue the vc parameter with the abbreviation v. You can issue the novc
parameter with the abbreviation nov.
The default is novc (datagrams).
ΓöîΓöÇnovcΓöÇΓöÉ
ΓöÇΓöÇsetΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇvcΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> view Subcommand ΓòÉΓòÉΓòÉ
The view subcommand sorts and lists the output of the previous ls subcommands
ΓöÇΓöÇviewΓöÇΓöÇfilenameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> filename ΓòÉΓòÉΓòÉ
Specifies the name of the file where the output was saved.
ΓòÉΓòÉΓòÉ <hidden> ? Subcommand ΓòÉΓòÉΓòÉ
The ? subcommand displays a summary of the NSLOOKUP subcommands. Using the ?
subcommand is the same as issuing the help subcommand.
ΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇsubcommandΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies an NSLOOKUP subcommand
ΓòÉΓòÉΓòÉ 40. os22unix Command ΓòÉΓòÉΓòÉ
The os22unix command converts ASCII files from OS/2 format to UNIX format. This
command converts OS/2 carriage return line feed pairs (CR LF) to UNIX line
feeds (LF). No other conversions are performed.
ΓöÇΓöÇos22unixΓöÇΓöÇ <infileΓöÇΓöÇ >outfileΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The os22unix command is implemented as a filter. Therefore, you must
include the < redirection symbol to sepcify the name of the input file and the
> redirection symbol to specify the name of the output file. If the
redirection symbols are not included, the filter expects its input to come from
the keyboard (the default input device) and will send its output to the display
(the default output device).
ΓòÉΓòÉΓòÉ <hidden> infile ΓòÉΓòÉΓòÉ
The file you want to convert.
ΓòÉΓòÉΓòÉ <hidden> outfile ΓòÉΓòÉΓòÉ
The file in which you receive the translated text.
ΓòÉΓòÉΓòÉ 41. ping Command ΓòÉΓòÉΓòÉ
The ping command sends an echo request to a remote host to determine if the
host is accessible.
ΓöÇpingΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇhostΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ
ΓööΓöÇ ΓöÇdΓöÇΓöÿ ΓööΓöÇ ΓöÇrΓöÇΓöÿ ΓööΓöÇ ΓöÇvΓöÇΓöÿ ΓööΓöÇdata_sizeΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇnpacketsΓöÇΓöÿ
Displaying ping Help
ΓöÇΓöÇpingΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Starts the socket-level debugging process.
ΓòÉΓòÉΓòÉ <hidden> -r ΓòÉΓòÉΓòÉ
Bypasses the routing tables and sends packets directly to a host on an attached
network. If the host is not on a directly-connected network, PING cannot make a
connection. This parameter can be used to ping a local host through an
interface that no longer has a route through it.
ΓòÉΓòÉΓòÉ <hidden> -v ΓòÉΓòÉΓòÉ
Specifies verbose output.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the IP address or host name of the remote host to which you want to
send the echo request.
ΓòÉΓòÉΓòÉ <hidden> data_size ΓòÉΓòÉΓòÉ
Sets the number of data bytes for the echo request (the default number of data
bytes is 56, with an additional 8-byte header attached).
ΓòÉΓòÉΓòÉ <hidden> npackets ΓòÉΓòÉΓòÉ
Sets the number of echo requests that are sent to the remote host.
These parameters are position dependent; you cannot specify the number of
packets without specifying the data size.
Note: If you do not specify npackets, the echo request is sent continuously
until one of the following actions stops the echo request:
Pressing the Ctrl and C keys simultaneously
Pressing the Ctrl and Break keys simultaneously
Closing the task
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 42. pmant Command ΓòÉΓòÉΓòÉ
The pmant command starts PMANT, a Presentation Manager 3270 terminal emulator
session. To use PMANT, a Telnet server must be running on a remote host.
Note: On screens with many extended attributes, the screen is painted without
extended attributes before the extended attributes can be painted.
ΓöîΓöÇΓöÇrows 24ΓöÇΓöÉ ΓöîΓöÇΓöÇcols 80ΓöÇΓöÉ
ΓöÇΓöÇpmantΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ ΓöÇextΓöÇΓöÿ ΓööΓöÇ ΓöÇrows nΓöÇΓöÿ ΓööΓöÇ ΓöÇcols nΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇnbΓöÇΓöÿ ΓööΓöÇ ΓöÇbΓöÇΓöÿ ΓööΓöÇ ΓöÇewΓöÇΓöÿ ΓööΓöÇ ΓöÇt textΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇtx filenameΓöÇΓöÿ ΓööΓöÇ ΓöÇncbΓöÇΓöÿ ΓööΓöÇ ΓöÇbcΓöÇΓöÿ
ΓöîΓöÇ ΓöÇp 23ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇp port_numberΓöÇΓöÿ ΓööΓöÇ ΓöÇdΓöÇΓöÿ
Displaying pmant Help
ΓöÇΓöÇpmantΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the host to which you are connecting. PMANT immediately tries to
establish a connection to the remote host. If you do not specify a host, PMANT
displays a window that prompts you to enter the host.
ΓòÉΓòÉΓòÉ <hidden> -ext ΓòÉΓòÉΓòÉ
Starts support for extended colors and nonstandard screen sizes. Extended
highlighting (reverse, blink, and underline) is supported.
ΓòÉΓòÉΓòÉ <hidden> -rows n ΓòÉΓòÉΓòÉ
Specifies the screen dimensions in number of rows (24-80). The default is 24.
Note: If -rows and -cols are specified and -ext is not specified, the
resulting screen size is a standard screen size equal to or smaller than the
size requested. The following are the four standard terminal screen sizes,
specified in rows by columns:
24 x 80
32 x 80
43 x 80
27 x 132
ΓòÉΓòÉΓòÉ <hidden> -cols n ΓòÉΓòÉΓòÉ
Specifies the screen dimensions in number of columns (80-150). The default is
80.
Note: If -rows and -cols are specified and -ext is not specified, the
resulting screen size is a standard screen size equal to or smaller than the
size requested. The following are the four standard terminal screen sizes,
specified in rows by columns:
24 x 80
32 x 80
43 x 80
27 x 132
ΓòÉΓòÉΓòÉ <hidden> -nb ΓòÉΓòÉΓòÉ
Suppresses the bell.
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Changes the output translation table for code points X'AD' and X'BD' to display
them as square brackets. On a 3179 terminal with the text feature, the square
brackets are at code points X'BA' and X'BB'. However, many programs display the
brackets using X'AD' and X'BD', because that is the EBCDIC definition.
ΓòÉΓòÉΓòÉ <hidden> -ew ΓòÉΓòÉΓòÉ
Ignores Erase/Write requests to change to the default display size (24 X 80).
ΓòÉΓòÉΓòÉ <hidden> -t text ΓòÉΓòÉΓòÉ
Specifies text to be displayed in the title bar and task list. When -t text is
not used, PMANT displays the specified host in the title bar and task list.
When -t is used, the text specified precedes the host. For example, if you
issue the pmant command like this:
pmant host1 -t sometext
Then
sometext: host1
is displayed in the title bar and task list. No spaces are allowed in the text.
ΓòÉΓòÉΓòÉ <hidden> -tx filename ΓòÉΓòÉΓòÉ
Reads the specified translation table. If the file name you specified does not
contain the full path, PMANT searchs the TCPIP\ETC directory for the file.
If you do not specify -tx, PMANT uses the translation file 3278XLT.TBL in the
TCPIP\ETC directory. If this file does not exist in the TCPIP\ETC directory,
PMANT uses the default US translate table provided with the application.
ΓòÉΓòÉΓòÉ <hidden> -ncb ΓòÉΓòÉΓòÉ
Specfies a nonblinking cursor.
Note: Even if you do not specify -ncb, the cursor will still blink on screens
where there is a blinking field.
ΓòÉΓòÉΓòÉ <hidden> -bc ΓòÉΓòÉΓòÉ
Specifies a block cursor.
ΓòÉΓòÉΓòÉ <hidden> -p port_number ΓòÉΓòÉΓòÉ
Specifies the port number to be used. The default port is 23. Port 1023 is
recommended if you are using servers that send ASCII prior to switching to
transparent mode.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Generates a PMANT.LOG file containing debug information for terminal
negotiation and all data sent to and received from the server.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 43. pmant Keyboard Mapping ΓòÉΓòÉΓòÉ
The default keyboard definitions are:
WORKSTATION FUNCTION
KEYBOARD KEY
Enter Field-Exit
Esc ATTN
PgUp PF7
PgDn PF8
Shift-Enter Newline
Shift-Tab Backtab
Shift-F1 through Shift-F12 PF13 through PF24
Right-Control Enter
Note: These actions apply to the standard PS/2 keyboard. If you use another
keyboard, the functions may vary.
ΓòÉΓòÉΓòÉ 44. pmping Command ΓòÉΓòÉΓòÉ
The pmping command starts PING, a Presentation Manager program that uses ping
to monitor a list of hosts that you define. This list of hosts is stored in the
file PINGHOST.LST.
ΓöÇΓöÇpmpingΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 45. pmx Command ΓòÉΓòÉΓòÉ
The pmx command starts the OS/2 Presentation Manager for X Window System[**]
for the server.
ΓöÇΓöÇpmxΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇclickclienttoraiseΓöÇΓöÿ ΓööΓöÇ ΓöÇclickframetoraiseΓöÇΓöÿ
ΓöîΓöÇ -co TCPIP\X11\RGB.TXTΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇco filenameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇexplicitfocusΓöÇΓöÿ
ΓöîΓöÇ -fc cursorΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇ -fn fixedΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇfc fontnameΓöÇΓöÿ ΓööΓöÇ ΓöÇfn fontnameΓöÇΓöÿ
ΓöîΓöÇ -fp TCPIP\X11\MISC,TCPIP\X11\75DPI,TCPIP\X11\SPEEDOΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöé ΓöîΓöÇ,ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ Γöé
Γöé Γöé Γöé
ΓööΓöÇ ΓöÇfp ΓöÇΓöÇΓöÇpathnameΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇimplicitfocusΓöÇΓöÿ ΓööΓöÇ ΓöÇk nΓöÇΓöÿ ΓööΓöÇ ΓöÇlcΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇlogpath directoryΓöÇΓöÿ ΓööΓöÇ ΓöÇnocascadeΓöÇΓöÿ
ΓöîΓöÇ ΓöÇcolorcursorΓöÇΓöÉ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇnocopyrightΓöÇΓöÿ ΓööΓöÇ ΓöÇpmcursorΓöÇΓöÿ ΓööΓöÇ ΓöÇbwcursorΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇreversecolorcursorΓöÇΓöÿ ΓööΓöÇ ΓöÇreversebwcursorΓöÇΓöÿ
ΓöîΓöÇ ΓöÇrΓöÇΓöÉ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇpseudocolorΓöÇΓöÿ ΓööΓöÇrΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇstaticcolorΓöÇΓöÿ ΓööΓöÇ ΓöÇIΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇiconifyΓöÇΓöÿ
Note: The pmx operands can be entered in any order.
Displaying pmx Help
ΓöÇΓöÇpmxΓöÇΓöÇ ΓöÇhelpΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> X Window System ΓòÉΓòÉΓòÉ
X Window System is a trademark of Massachusetts Institute of Technology.
ΓòÉΓòÉΓòÉ <hidden> -clickclienttoraise ΓòÉΓòÉΓòÉ
Tells the server to raise windows to the top when clicks are done in the
application (client) area, which is the usual Presentation Manager behavior.
(Clicks in the PM frame also can raise the window.) This option turns off any
previous -clickframetoraise option on the pmx command line. This option is the
default.
ΓòÉΓòÉΓòÉ <hidden> -clickframetoraise ΓòÉΓòÉΓòÉ
Tells the server to raise windows to the top only when clicks are done on the
PM frame. Clicking on the application (client) area will not raise the window.
This option turns off any previous -clickclienttoraise option on the pmx
command line.
ΓòÉΓòÉΓòÉ <hidden> -co filename ΓòÉΓòÉΓòÉ
Sets the color database file name. The default is TCPIP\X11\RGB.TXT.
ΓòÉΓòÉΓòÉ <hidden> -explicitfocus ΓòÉΓòÉΓòÉ
Tells the server to transfer focus from one client window to another only by
clicking in the window. This is the normal behavior for Presentation Manager
windows and is the default behavior for the server. This option turns off any
previous -implicitfocus option on the pmx command line.
ΓòÉΓòÉΓòÉ <hidden> -fc fontname ΓòÉΓòÉΓòÉ
Sets the cursor font. The default is cursor.
ΓòÉΓòÉΓòÉ <hidden> -fn fontname ΓòÉΓòÉΓòÉ
Sets default font. The default is fixed.
ΓòÉΓòÉΓòÉ <hidden> -fp pathname ΓòÉΓòÉΓòÉ
Sets the default font path. The default is
TCPIP\X11\MISC,TCPIP\X11\75DPI,TCPIP\X11\SPEEDO.
ΓòÉΓòÉΓòÉ <hidden> -implicitfocus ΓòÉΓòÉΓòÉ
Tells the server to transfer focus from one client window to another simply by
moving the pointer into the client area of the window. It is not necessary to
click on a client window to transfer focus to it (provided some PMX client
window already has focus). This is not the normal behavior for Presentation
Manager windows. This option turns off any previous -explicitfocus option on
the pmx command line.
ΓòÉΓòÉΓòÉ <hidden> -k n ΓòÉΓòÉΓòÉ
Sets the keyboard type, where n comes from the following table. Typical USA
keyboards have 101 keys; European languages usually have 102 keys. PMX handles
three types of Japanese keyboards.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé KEYBOARD TYPE Γöé -K FLAG VALUE Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 101 key Γöé 101 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 102 key Γöé 102 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese 5576-A01 (106 keys) Γöé 5576-A01 or 5576A01 or 106A Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese 5576-001 (124 keys) Γöé 5576-001 or 5576001 or 124 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese 5576-002 (106 keys) Γöé 5576-002 or 5576002 or 106 Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -lc ΓòÉΓòÉΓòÉ
Doubles the dimensions of any cursor, unless it will become too large to be a
Presentation Manager cursor.
ΓòÉΓòÉΓòÉ <hidden> -logpath directory ΓòÉΓòÉΓòÉ
Specifies where to put the PMX.LOG log file. If -logpath is not specified, the
directory for PMX.LOG is specified by the ETC environment variable. If PMX
files are stored on a shared read-only disk, this allows the log file to be
placed elsewhere.
ΓòÉΓòÉΓòÉ <hidden> -nocascade ΓòÉΓòÉΓòÉ
Windows that are not initially positioned by user specifications normally are
cascaded down the screen. The -nocascade parameter says to not cascade if the
application provided an initial location.
ΓòÉΓòÉΓòÉ <hidden> -nocopyright ΓòÉΓòÉΓòÉ
Does not display initial copyright window when starting.
ΓòÉΓòÉΓòÉ <hidden> -pmcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use the PM arrow as the cursor, not an X Window
System cursor.
ΓòÉΓòÉΓòÉ <hidden> -bwcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System cursor, but with only black
and white instead of colors. This is the default if the PM display device
driver does not support colored cursors.
ΓòÉΓòÉΓòÉ <hidden> -colorcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System colored cursor. This is the
default unless the PM display device driver does not support colored cursors.
ΓòÉΓòÉΓòÉ <hidden> -reversecolorcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System colored cursor. The
foreground and background colors will be reversed from the normal colors. For
example, the normal X Window System cursor will be black on the outside, and
white in the middle.
ΓòÉΓòÉΓòÉ <hidden> -reversebwcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System cursor, but with only black
and white instead of colors. Black and white will be reversed from the normal
colors. For example, the normal X Window System cursor will be black on the
outside and white in the middle.
ΓòÉΓòÉΓòÉ <hidden> -pseudocolor ΓòÉΓòÉΓòÉ
Tells PMX to provide a PseudoColor visual (modifiable color maps) for
applications to select. You can specify the -pseudocolor parameter with the
abbreviation -pseudo.
ΓòÉΓòÉΓòÉ <hidden> -r ΓòÉΓòÉΓòÉ
Turns on automatic repeating of keys on the keyboard. This is the default.
ΓòÉΓòÉΓòÉ <hidden> r ΓòÉΓòÉΓòÉ
Turns off automatic repeating of keys on the keyboard.
ΓòÉΓòÉΓòÉ <hidden> -staticcolor ΓòÉΓòÉΓòÉ
Tells PMX to provide a StaticColor visual (nonmodifiable color map) for
applications to select. You can specify the -staticcolor parameter using the
abbreviation -static.
ΓòÉΓòÉΓòÉ <hidden> -I ΓòÉΓòÉΓòÉ
Ignores all remaining arguments.
ΓòÉΓòÉΓòÉ <hidden> -iconify ΓòÉΓòÉΓòÉ
Specifies that the X Window System server window will automatically reduce to a
window-list entry. The X Window System server will also be shown as an icon in
the minimized window folder or on the desktop.
ΓòÉΓòÉΓòÉ <hidden> -help ΓòÉΓòÉΓòÉ
Displays help information for the pmx command and does not start the X Window
System server.
ΓòÉΓòÉΓòÉ 46. pmxwait Command ΓòÉΓòÉΓòÉ
The pmxwait command tests whether the server becomes ready to accept client
connections within a specified time period.
ΓöîΓöÇ ΓöÇquietΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇ30ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇpmxwaitΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇverboseΓöÇΓöÿ ΓööΓöÇsecondsΓöÇΓöÿ
Displaying pmxwait help
ΓöÇΓöÇpmxwaitΓöÇΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -verbose ΓòÉΓòÉΓòÉ
Specifies that a message prints on the standard output device indicating
whether the server was ready. If a wait is necessary, a message is also
printed. You can specify the verbose parameter with the abbreviation -v.
ΓòÉΓòÉΓòÉ <hidden> -quiet ΓòÉΓòÉΓòÉ
Specifies that no messages are printed. -quiet is the default. You can specify
the quiet parameter with the abbreviation -q.
ΓòÉΓòÉΓòÉ <hidden> seconds ΓòÉΓòÉΓòÉ
Specifies the number of seconds to wait for the server to become ready to
accept client connections. If seconds is not specified, the default number of
30 seconds is used. The maximum time period is 180.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Prints the pmxwait command syntax on a standard output device. Any other
parameters are ignored.
ΓòÉΓòÉΓòÉ 47. portmap Command ΓòÉΓòÉΓòÉ
The portmap command starts a protocol to define a network service that permits
clients to look up the port number of any remote program supported by the
server.
ΓöÇΓöÇportmapΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 48. qmount Command ΓòÉΓòÉΓòÉ
The qmount command queries the characteristics of a drive.
ΓöÇΓöÇqmountΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇdrive_lettersΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying qmount Help
ΓöÇΓöÇqmountΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> drive_letters ΓòÉΓòÉΓòÉ
Specifies the drives to query from the local file system. If you do not specify
a drive letter, a list of all attached file systems is displayed.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 49. rexec Command ΓòÉΓòÉΓòÉ
The rexec command issues a command on a remote host. The rexec command sends a
single command to the remote host.
ΓöÇΓöÇrexecΓöÇΓöÇhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇl loginnameΓöÇΓöÿ ΓööΓöÇ ΓöÇp passwordΓöÇΓöÿ ΓööΓöÇ ΓöÇkΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇcommandΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇnΓöÇΓöÿ ΓööΓöÇ ΓöÇbΓöÇΓöÿ ΓööΓöÇ ΓöÇiΓöÇΓöÿ
Displaying rexec Help
ΓöÇΓöÇrexecΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the remote host on which the command is to be issued.
ΓòÉΓòÉΓòÉ <hidden> -l loginname ΓòÉΓòÉΓòÉ
Specifies the user ID on host. If you do not specify a login name, the values
in the NETRC file are used.
ΓòÉΓòÉΓòÉ <hidden> -p password ΓòÉΓòÉΓòÉ
Specifies the password that is associated with the login name. If you do not
specify a password, the values in the NETRC file are used. If the NETRC file
does not provide the password value, rexec prompts you for the password. You
can enter the password in a nonecho mode.
ΓòÉΓòÉΓòÉ <hidden> -k ΓòÉΓòÉΓòÉ
Ignores the local keyboard input. This is helpful for running noninteractive
input, especially from a batch file.
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Specifies not to use the NETRC file for automatic login.
ΓòÉΓòÉΓòÉ <hidden> command ΓòÉΓòÉΓòÉ
Specifies the command to be issued on the remote host. The command must be in
the syntax used by the remote host.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Transfers data to and from the remote host using binary mode. If you do not use
this switch, REXEC transfers the data using the ascii mode.
If you omit this switch, RSH will strip the CR from a CRLF pair when sending
data to the remote host and will add a CR to the LF on data received from the
remote host.
ΓòÉΓòÉΓòÉ <hidden> -i ΓòÉΓòÉΓòÉ
Uses interactive mode for input. REXEC reads input directly from the keyboard
instead of from standard input (stdin).
ΓòÉΓòÉΓòÉ 50. rexecd Command ΓòÉΓòÉΓòÉ
The rexecd command starts the REXEC server on your local host. The rexecd
command starts the REXECD.EXE program and runs as a task until you shut down
the server.
ΓöîΓöÇ ΓöÇt 180ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇrexecdΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇt secondsΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -t seconds ΓòÉΓòÉΓòÉ
The number of seconds before the server will timeout while servicing a client
command. The default is 180. If you do not want a timeout, specify -1.
ΓòÉΓòÉΓòÉ 51. route Command ΓòÉΓòÉΓòÉ
The route command is used to modify the network routing tables. Use the route
command only if you are an experienced TCP/IP user.
Adding to the Route Table
ΓöÇrouteΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇaddΓöÇΓö¼ΓöÇnetΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇdestinationΓöÇΓö¼ΓöÇrouterΓöÇΓöÇ
ΓööΓöÇ ΓöÇfΓöÇΓöÿ ΓööΓöÇ ΓöÇhΓöÇΓöÿ Γö£ΓöÇsubnetΓöÇΓöñ ΓööΓöÇdefaultΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇmetricΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Deleting from the Route Table
ΓöÇrouteΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇdeleteΓöÇΓö¼ΓöÇnetΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇdestinationΓöÇΓö¼ΓöÇrouterΓöÇ
ΓööΓöÇ ΓöÇfΓöÇΓöÿ ΓööΓöÇ ΓöÇhΓöÇΓöÿ Γö£ΓöÇsubnetΓöÇΓöñ ΓööΓöÇdefaultΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇmetricΓöÇΓöÿ
Route Table Help
ΓöÇΓöÇrouteΓöÇ-?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -f ΓòÉΓòÉΓòÉ
Empties the routing tables of all network and subnet route entries. If this is
used in conjunction with another parameter, the tables are emptied before the
other parameters take effect.
ΓòÉΓòÉΓòÉ <hidden> -h ΓòÉΓòÉΓòÉ
Empties the routing tables of all host route entries. If this is used in
conjunction with another parameter, the tables are emptied before other
parameters take effect.
ΓòÉΓòÉΓòÉ <hidden> add ΓòÉΓòÉΓòÉ
Adds a route. If you specify the add parameter, metric is required.
ΓòÉΓòÉΓòÉ <hidden> delete ΓòÉΓòÉΓòÉ
Deletes a route.
ΓòÉΓòÉΓòÉ <hidden> net ΓòÉΓòÉΓòÉ
Specifies that a network is to be added or deleted.
ΓòÉΓòÉΓòÉ <hidden> subnet ΓòÉΓòÉΓòÉ
Specifies that a subnet is to be added or deleted.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies that a host is to be added or deleted.
ΓòÉΓòÉΓòÉ <hidden> destination ΓòÉΓòÉΓòÉ
Specifies the internet address of the host, network, or subnet.
ΓòÉΓòÉΓòÉ <hidden> default ΓòÉΓòÉΓòÉ
Specifies all destinations not defined with another routing table entry.
ΓòÉΓòÉΓòÉ <hidden> router ΓòÉΓòÉΓòÉ
Specifies the internet address of the next hop in the path to the destination.
ΓòÉΓòÉΓòÉ <hidden> metric ΓòÉΓòÉΓòÉ
Specifies the number of hops to the destination. The metric parameter is
required for adding to the route table.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 52. routed Command ΓòÉΓòÉΓòÉ
The routed command starts the ROUTE server on your local host. This command
starts the ROUTED.EXE program, which runs as a task until you shut down the
server.
ΓöÇΓöÇroutedΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ
ΓööΓöÇ ΓöÇdΓöÇΓöÿ ΓööΓöÇ ΓöÇgΓöÇΓöÿ ΓööΓöÇ ΓöÇsΓöÇΓöÿ ΓööΓöÇ ΓöÇqΓöÇΓöÿ Γö£ΓöÇ ΓöÇtΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ ΓöÇt ΓöÇtΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ ΓöÇt ΓöÇt ΓöÇtΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇ ΓöÇt ΓöÇt ΓöÇt ΓöÇtΓöÇΓöÿ
Displaying routed Help
ΓöÇΓöÇroutedΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The parameters for the routed command are case-sensitive and must be
entered in lowercase.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Enables additional debugging information to be logged, such as corrupted
packets received.
ΓòÉΓòÉΓòÉ <hidden> -g ΓòÉΓòÉΓòÉ
Offers a route to the default destination. You can use this on a gateway to an
internet or on a gateway that uses another routing protocol whose routes are
not reported to other local gateways.
ΓòÉΓòÉΓòÉ <hidden> -s ΓòÉΓòÉΓòÉ
Forces the routed command to supply routing information, regardless of whether
it is acting as an internetwork router. This occurs if there is more than one
network interface present or if a point-to-point link is in use.
ΓòÉΓòÉΓòÉ <hidden> -q ΓòÉΓòÉΓòÉ
Suppresses broadcasting of routing information.
ΓòÉΓòÉΓòÉ <hidden> -t ΓòÉΓòÉΓòÉ
Starts the packet tracing process.
ΓòÉΓòÉΓòÉ <hidden> -t -t ΓòÉΓòÉΓòÉ
Starts the packet tracing process and traces all packets sent or received on
the standard output. The spaces between the parameters are required.
ΓòÉΓòÉΓòÉ <hidden> -t -t -t ΓòÉΓòÉΓòÉ
Starts the packet tracing process, traces all packets sent or received on the
standard output, and starts history tracing. The spaces between the parameters
are required.
ΓòÉΓòÉΓòÉ <hidden> -t -t -t -t ΓòÉΓòÉΓòÉ
Starts the packet tracing process, traces all packets sent or received on the
standard output, starts history tracing, and starts tracing the packet
contents. The spaces between the parameters are required.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 53. rpcgen Command ΓòÉΓòÉΓòÉ
The rpcgen command generates C code to implement an RPC protocol. The input to
rpcgen is a language similar to C, known as RPC language.
ΓöÇΓöÇrpcgenΓöÇΓöÇinfileΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓöÇΓöÇrpcgenΓöÇΓöÇΓö¼ΓöÇ ΓöÇcΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇ ΓöÇhΓöÇΓöñ ΓööΓöÇ ΓöÇo outfileΓöÇΓöÿ ΓööΓöÇinfileΓöÇΓöÿ
Γö£ΓöÇ ΓöÇlΓöÇΓöñ
ΓööΓöÇ ΓöÇmΓöÇΓöÿ
ΓöÇΓöÇrpcgenΓöÇΓöÇ ΓöÇs transportΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇo outfileΓöÇΓöÿ ΓööΓöÇinfileΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ
Compiles into XDR routines.
ΓòÉΓòÉΓòÉ <hidden> -h ΓòÉΓòÉΓòÉ
Compiles into C data definitions (a header file).
ΓòÉΓòÉΓòÉ <hidden> -l ΓòÉΓòÉΓòÉ
Compiles into client-side stubs.
ΓòÉΓòÉΓòÉ <hidden> -m ΓòÉΓòÉΓòÉ
Compiles into server-side stubs without generating a main routine.
ΓòÉΓòÉΓòÉ <hidden> -o outfile ΓòÉΓòÉΓòÉ
Specifies the name of the output file. If none is specified, standard output is
used for -c, -h, -l, -m, and -s modes.
ΓòÉΓòÉΓòÉ <hidden> infile ΓòÉΓòÉΓòÉ
Specifies the name of the input file written in the RPC language.
ΓòÉΓòÉΓòÉ <hidden> -s transport ΓòÉΓòÉΓòÉ
Compiles into server-side stubs, using the given transport.
ΓòÉΓòÉΓòÉ 54. rpcinfo Command ΓòÉΓòÉΓòÉ
The rpcinfo command makes an RPC call to the RPC server and reports the status
of the server, which is registered and operational with Portmapper[**].
rpcinfo for a Host
ΓöîΓöÇlocal_hostΓöÇΓöÉ
ΓöÇΓöÇrpcinfoΓöÇΓöÇ ΓöÇp ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
rpcinfo for a Host Using UDP
ΓöÇΓöÇrpcinfoΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ ΓöÇu host prognumΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ
ΓööΓöÇ ΓöÇn portnumΓöÇΓöÿ ΓööΓöÇversnumΓöÇΓöÿ
rpcinfo for a Host Using TCP
ΓöÇΓöÇrpcinfoΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ ΓöÇt host prognumΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ
ΓööΓöÇ ΓöÇn portnumΓöÇΓöÿ ΓööΓöÇversnumΓöÇΓöÿ
rpcinfo for a Broadcast to Hosts Using UDP
ΓöÇΓöÇrpcinfoΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇprognum versnumΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇbΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> Portmapper ΓòÉΓòÉΓòÉ
Portmapper is a trademark of Sun Microsystems, Inc.
ΓòÉΓòÉΓòÉ <hidden> -p host ΓòÉΓòÉΓòÉ
Queries the Portmapper about the specified host and prints a list of all
registered RPC programs. If the host is not specified, the system defaults to
the local host name.
ΓòÉΓòÉΓòÉ <hidden> -n portnum ΓòÉΓòÉΓòÉ
Specifies the port number to be used for the -t and -u parameters. This value
replaces the port number that is given by the Portmapper.
ΓòÉΓòÉΓòÉ <hidden> -u host prognum versnum ΓòÉΓòÉΓòÉ
Sends an RPC call to procedure 0 of prognum and versnum on the specified host
using UDP and reports whether a response is received.
ΓòÉΓòÉΓòÉ <hidden> -t host prognum versnum ΓòÉΓòÉΓòÉ
Sends an RPC call to procedure 0 of prognum and versnum on the specified host
using TCP and reports whether a response is received.
ΓòÉΓòÉΓòÉ <hidden> -b prognum versnum ΓòÉΓòÉΓòÉ
Sends an RPC broadcast to procedure 0 of the specified prognum and versnum
using UDP and reports all hosts that respond.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 55. rsh Command ΓòÉΓòÉΓòÉ
The rsh command issues the specified command at the remote host.
ΓöîΓöÇ ΓöÇl user environment variableΓöÇΓöÉ
ΓöÇΓöÇrshΓöÇΓöÇhostΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇl loginnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇ ΓöÇu value of ΓöÇl argumentΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇu local login nameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇn ΓöÇΓöÿ ΓööΓöÇ ΓöÇb ΓöÇΓöÿ ΓööΓöÇ ΓöÇi ΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ commandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the remote host on which the command is to be issued.
ΓòÉΓòÉΓòÉ <hidden> -l loginname ΓòÉΓòÉΓòÉ
Specifies the user ID on the remote host. If you do not specify this parameter,
the value of the USER environment variable is used.
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Ignores any keyboard input during the issuing of commands. This is helpful for
some noninteractive commands, especially when they are run from batch files. It
blocks input from the keyboard.
ΓòÉΓòÉΓòÉ <hidden> command ΓòÉΓòÉΓòÉ
Specifies the command to be issued on the remote host. The command must conform
to the syntax used by the remote host.
ΓòÉΓòÉΓòÉ <hidden> -u local login name ΓòÉΓòÉΓòÉ
Specifies the user ID on the local host. If you omit this value, the value of
the -l argument is used by default.
For example, to use RSH with a VM remote host, you would use -l for the VM
password and -u for the VM user ID.
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Transfers data to and from the remote host using binary mode. If you do not use
this switch, RSH transfers the data using the ascii mode.
ΓòÉΓòÉΓòÉ <hidden> -i ΓòÉΓòÉΓòÉ
Uses interactive mode for input. RSH reads input directly from the keyboard
instead of from standard input (stdin).
ΓòÉΓòÉΓòÉ 56. rshd Command ΓòÉΓòÉΓòÉ
The rshd command starts the RSH server on the local host. The rshd command
starts the RSHD.EXE program and runs as a task until you shut down the server.
ΓöÇΓöÇrshdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 57. sendmail ΓòÉΓòÉΓòÉ
The sendmail command sends mail without using LAMAIL.
ΓöÇΓöÇsendmailΓöÇΓöÇ -af filenameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓöÇΓöÇΓö¼ΓöÇ ΓöÇf user@localhost user@remotehostΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇtΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Note: OS/2 is not a multiuser operating system. The user field of an address
in an item of mail sent to an OS/2 system is not significant; however, it is
required. The significant part of the address is the host name, with the domain
name expansion if domain names are used.
ΓòÉΓòÉΓòÉ <hidden> -af filename ΓòÉΓòÉΓòÉ
Specifies the name of the file that contains the mail message
ΓòÉΓòÉΓòÉ <hidden> -f user@localhost ΓòÉΓòÉΓòÉ
Identifies the user and host name of the sender
ΓòÉΓòÉΓòÉ <hidden> user@remotehost ΓòÉΓòÉΓòÉ
Identifies the user and host name of the receiver (or destination)
ΓòÉΓòÉΓòÉ <hidden> -t ΓòÉΓòÉΓòÉ
Specifies that SENDMAIL retrieves the to and from information for the mail from
the body of the file rather than from the command line
ΓòÉΓòÉΓòÉ 58. sendmail Server Command ΓòÉΓòÉΓòÉ
The server sendmail command starts the SENDMAIL server which listens for and
receives mail from the LAN and sends queued mail on the LAN.
ΓöÇΓöÇsendmailΓöÇΓöÇ ΓöÇbdΓöÇΓöÇ ΓöÇqtimeΓöÇΓöÇΓö¼ΓöÇ ΓöÇdΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇd1.1ΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -bd ΓòÉΓòÉΓòÉ
Starts SENDMAIL as a server.
ΓòÉΓòÉΓòÉ <hidden> -qtime ΓòÉΓòÉΓòÉ
Specifies how often the mail queue can be processed. Enter the time as a number
and a letter, where the letter is one of the following:
s for seconds
m for minutes
h for hours
d for days
w for weeks
For example:
-q30m specifies every 30 minutes
-q1h30m specifies every hour and 30 minutes
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Writes detailed debugging information to the SENDMAIL console, and creates a
SENDMAIL.LOG file that contains the simple mail transfer protocol (SMTP)
transactions between the SENDMAIL server and the remote SMTP server.
The SENDMAIL.LOG file is placed in the ETC directory. For example, to start the
SENDMAIL server with detailed debug information, use:
[C:\]sendmail -bd -q30m -d
ΓòÉΓòÉΓòÉ <hidden> -d1.1 ΓòÉΓòÉΓòÉ
Creates only the SENDMAIL.LOG file.
ΓòÉΓòÉΓòÉ 59. settcppf Command ΓòÉΓòÉΓòÉ
On a Telnet server workstation, use the settcppf command to set the Telnet
authentication option in the TCP/IP profile (TCPIP.INI) to optional (1) or
required (2).
ΓöÇΓöÇsettcppfΓöÇΓöÇΓö¼ΓöÇ ΓöÇTelnet ΓöÇΓö¼ΓöÇ0ΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöé Γö£ΓöÇ1ΓöÇΓöñ Γöé
Γöé ΓööΓöÇ2ΓöÇΓöÿ Γöé
ΓööΓöÇ ΓöÇdisplayΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -Telnet <value> ΓòÉΓòÉΓòÉ
Specifies
0 Sets authentication off.
1 Sets authentication to optional. The server will attempt to authenticate
the user, but will complete the login even if the authentication fails.
2 Sets authentication to mandatory. The server will attempt to authenticate
the user, and will complete the login only if the authentication is
successful.
ΓòÉΓòÉΓòÉ <hidden> -display ΓòÉΓòÉΓòÉ
Displays the authentication status at the workstation
ΓòÉΓòÉΓòÉ 60. setterm Command ΓòÉΓòÉΓòÉ
The setterm command configures the features of your Telnet application.
ΓöÇΓöÇsettermΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇfsΓöÇΓöÿ ΓööΓöÇ ΓöÇf cfileΓöÇΓöÿ
Displaying setterm Help
ΓöÇΓöÇsettermΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Specifying the setterm command without any parameters creates or modifies the
TELNET.CFG in the ETC subdirectory.
ΓòÉΓòÉΓòÉ <hidden> -fs ΓòÉΓòÉΓòÉ
Instructs SetTerm to start running in full-screen mode. If OS/2 is currently in
Window mode, then SetTerm switches to full-screen mode before it starts up.
ΓòÉΓòÉΓòÉ <hidden> -f cfile ΓòÉΓòÉΓòÉ
Instructs SetTerm to access an alternate configuration file (cfile) rather than
the default (TELNET.CFG) for the SetTerm definitions and displays a menu to
allow changes the configuration. To have Telnet access the values in the
alternate configuration file, issue the telnet command with the -f config_file
parameter.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 61. showattr Command ΓòÉΓòÉΓòÉ
The showattr command displays a list of the file attributes associated with the
MVS NFS Server.
ΓöÇΓöÇshowattrΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇhostnameΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇtΓöÇΓöÿ ΓööΓöÇdrive:ΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -t ΓòÉΓòÉΓòÉ
Specifies that the output is tersed.
ΓòÉΓòÉΓòÉ <hidden> hostname ΓòÉΓòÉΓòÉ
Specifies the name of the MVS host.
ΓòÉΓòÉΓòÉ <hidden> drive: ΓòÉΓòÉΓòÉ
Specifies the drive letter to which the mounted file system is attached.
ΓòÉΓòÉΓòÉ 62. showexp Command ΓòÉΓòÉΓòÉ
The showexp command displays a list of exported file systems for a specific
host running an NFS server.
ΓöÇΓöÇshowexpΓöÇΓöÇhostΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Displaying showexp Help
ΓöÇΓöÇshowexpΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the host name of an NFS server.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 63. showmoun Command ΓòÉΓòÉΓòÉ
The showmoun command displays a list of all the clients that remotely mounted a
file system from a specified host. The command also displays a list of drives
and directories that were remotely mounted by clients.
ΓöîΓöÇcurrent_hostΓöÇΓöÉ
ΓöÇΓöÇshowmounΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhost_nameΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host_name ΓòÉΓòÉΓòÉ
Specifies the host name of the NFS server that is to be used as a remote
resource. The default is the current host.
ΓòÉΓòÉΓòÉ 64. slcfg Command ΓòÉΓòÉΓòÉ
The slcfg command is used to test parsing of the SLIP.CFG file.
ΓöÇΓöÇslcfgΓöÇΓöÇslip.cfgΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Enables debugging mode
ΓòÉΓòÉΓòÉ 65. slip Command ΓòÉΓòÉΓòÉ
The slip command is used to start the main slip driver.
Warning: A debug option can produce large amounts of output and can slow
performance. You may want to redirect the debugging output to a file.
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdΓöÇΓöÿ ΓööΓöÇ ΓöÇtΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Enables debugging output
ΓòÉΓòÉΓòÉ <hidden> -t ΓòÉΓòÉΓòÉ
Specifies that the SLIP command start tracing packets.
The -t option starts SLIP tracing all packets received from and sent to the
modem. The data is written to SLIPTRC.DMP in the directory from which SLIP was
started. To stop the trace, press the Ctrl-c or Ctrl-Break keys.
Because SLIP will record all traffic sent and received, the SLIPTRC.DMP file
can grow quite large. There is no error checking to see if there is enough hard
disk space available to continue recording the information. You should use this
trace option in a limited fashion so that it does not impact the performance of
the workstation where it is being run.
ΓòÉΓòÉΓòÉ 66. slipterm Command ΓòÉΓòÉΓòÉ
The slipterm command enables interactive communication with a modem.
ΓöÇΓöÇsliptermΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇwΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ ΓööΓöÇ ΓöÇdΓöÿ
ΓööΓöÇnnΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -w ΓòÉΓòÉΓòÉ
Invokes the SLIPWAIT utility.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Enables debugging mode.
ΓòÉΓòÉΓòÉ <hidden> nn ΓòÉΓòÉΓòÉ
Specifies the number of seconds to wait (the default is 30).
ΓòÉΓòÉΓòÉ 67. snmp Command ΓòÉΓòÉΓòÉ
The snmp command starts the simple network management protocol (SNMP), which is
used by network elements (for example, hosts and bridges) to exchange
information about network management.
ΓöÇΓöÇsnmpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇgetΓöÇΓöÇΓö¼ΓöÇΓöÇhostΓöÇΓöÇcommunity_nameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdΓöÇΓöÿ ΓööΓöÇnextΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇΓöÇΓöÇmib_variableΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Displaying snmp Help
ΓöÇΓöÇsnmpΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Specifies tracing of SNMP requests and responses. If you want tracing, this
must be the first parameter you specify.
ΓòÉΓòÉΓòÉ <hidden> get ΓòÉΓòÉΓòÉ
Specifies that the client should obtain a specific management information base
(MIB) variable.
ΓòÉΓòÉΓòÉ <hidden> next ΓòÉΓòÉΓòÉ
Specifies that the client should obtain the next MIB variable after the current
one.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the destination host to which you want to send a request. This can be
either an internet protocol address or a host name.
ΓòÉΓòÉΓòÉ <hidden> community_name ΓòÉΓòÉΓòÉ
Specifies the community name of the SNMP agent on the destination.
ΓòÉΓòÉΓòÉ <hidden> mib_variable ΓòÉΓòÉΓòÉ
Specifies the MIB object, using its object descriptor (textual name), object
identifier using ASN.1 notation, or a combination of the two.
You can specify more than one mib_variable on the command line. For example,
snmp next melvin ok sysdescr ifdescr.1
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 68. snmpd Command ΓòÉΓòÉΓòÉ
The snmpd command starts the SNMP agent. The snmpd command runs as a task until
you shut down the server.
ΓöîΓöÇ ΓöÇt 5ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇsnmpdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöé ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ Γöé ΓööΓöÇ ΓöÇt secondsΓöÇΓöÿ
Γöé ΓöîΓöÇ255ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ Γöé Γöé
ΓööΓöÇΓöÇΓöÇ ΓöÇdΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓö┤ΓöÇΓöÿ
ΓööΓöÇdebug_levelΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Starts debugging.
ΓòÉΓòÉΓòÉ <hidden> debug_level ΓòÉΓòÉΓòÉ
Specifies the debug level. The following values are recognized:
1 Reserved
2 Trace DPI internals
4 Trace DPI packets
8 Trace SNMPD internals
16 Trace SNMPD externals
32 Trace SNMP requests
64 Trace SNMP replies and traps
128 Reserved
255 Everything
The default is 255.
ΓòÉΓòÉΓòÉ <hidden> -t seconds ΓòÉΓòÉΓòÉ
Specifies the amount of time (in seconds) that the SNMPD agent waits for a
reply from an SNMP DPI subagent. The default is 5.
ΓòÉΓòÉΓòÉ 69. snmpgrp Command ΓòÉΓòÉΓòÉ
The snmpgrp command retrieves management information about the network from the
management information base (MIB). This information is retrieved using the name
of a group of related MIB variables or the name of a specific table of MIB
variables.
ΓöÇsnmpgrpΓöÇhostΓöÇcommunity_nameΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ
ΓööΓöÇsysΓöÇΓöÿΓööΓöÇiftabΓöÇΓöÿΓööΓöÇarptabΓöÇΓöÿΓööΓöÇipΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇipaddrΓöÇΓöÿ ΓööΓöÇiprouteΓöÇΓöÿ ΓööΓöÇmediatabΓöÇΓöÿ ΓööΓöÇicmpΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇtcpΓöÇΓöÿ ΓööΓöÇtcptabΓöÇΓöÿ ΓööΓöÇudpΓöÇΓöÿ ΓööΓöÇudptabΓöÇΓöÿ
Displaying snmpgrp Help
ΓöÇΓöÇsnmpgrpΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the host to which you want to send a request. You can specify either
an internet protocol address or a host name.
ΓòÉΓòÉΓòÉ <hidden> community_name ΓòÉΓòÉΓòÉ
Specifies the community name of the simple network management protocol agent on
the destination host.
ΓòÉΓòÉΓòÉ <hidden> sys ΓòÉΓòÉΓòÉ
Specifies the System group of MIB variables.
ΓòÉΓòÉΓòÉ <hidden> iftab ΓòÉΓòÉΓòÉ
Specifies the Interface table in the interfaces group.
ΓòÉΓòÉΓòÉ <hidden> arptab ΓòÉΓòÉΓòÉ
Specifies the AT table in the address translation group.
ΓòÉΓòÉΓòÉ <hidden> ip ΓòÉΓòÉΓòÉ
Specifies the scalar MIB variables in the IP group.
ΓòÉΓòÉΓòÉ <hidden> ipaddr ΓòÉΓòÉΓòÉ
Specifies the IP address table in the IP group.
ΓòÉΓòÉΓòÉ <hidden> iproute ΓòÉΓòÉΓòÉ
Specifies the IP routing table in the IP group.
ΓòÉΓòÉΓòÉ <hidden> mediatab ΓòÉΓòÉΓòÉ
Specifies the IP address translation table in the IP group.
ΓòÉΓòÉΓòÉ <hidden> icmp ΓòÉΓòÉΓòÉ
Specifies the ICMP group of MIB variables.
ΓòÉΓòÉΓòÉ <hidden> tcp ΓòÉΓòÉΓòÉ
Specifies the scalar MIB variables in the TCP group.
ΓòÉΓòÉΓòÉ <hidden> tcptab ΓòÉΓòÉΓòÉ
Specifies the TCP connection table in the TCP group.
ΓòÉΓòÉΓòÉ <hidden> udp ΓòÉΓòÉΓòÉ
Specifies the scalar MIB variables in the UDP group.
ΓòÉΓòÉΓòÉ <hidden> udptab ΓòÉΓòÉΓòÉ
Specifies the UDP listener table in the UDP group.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 70. snmptrap Command ΓòÉΓòÉΓòÉ
The snmptrap command receives and displays unsolicited notification of network
events (TRAPs) from simple network management protocol agents.
ΓöÇΓöÇsnmptrapΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 71. talk Command ΓòÉΓòÉΓòÉ
The talk command is an interactive command that allows users on the network to
send and receive electronic messages. The talk command is useful for short
messages that do not need verified responses.
ΓöÇΓöÇtalkΓöÇΓöÇuser@hostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇttynameΓöÇΓöÿ
Displaying talk Help
ΓöÇΓöÇtalkΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> user ΓòÉΓòÉΓòÉ
Specifies the name of the user to receive the message on the remote host. For
an OS/2 destination, the user name is os2user. For other destinations that
support talk, the user is the user name of the person with whom you are
attempting to communicate.
ΓòÉΓòÉΓòÉ <hidden> @host ΓòÉΓòÉΓòÉ
Specifies the host name of the remote host.
ΓòÉΓòÉΓòÉ <hidden> ttyname ΓòÉΓòÉΓòÉ
A term that is assigned to users at logon. The terminal identifier, available
for display, is unique for each logon session.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 72. talkd Command ΓòÉΓòÉΓòÉ
The talkd command starts the TALK server and must be running on both the local
and remote hosts to exchange TALK messages. The talkd command starts the
TALKD.EXE program and runs as a task until you shut down the server.
ΓöÇΓöÇtalkdΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 73. tcpdsktp Command ΓòÉΓòÉΓòÉ
The tcpdsktp command places the icons for the TCP/IP functions you installed on
the OS/2 desktop. If the icons do not appear on the desktop, or if some or all
of them have been removed, you can restore them to the desktop using this
command. The tcpdsktp command creates the following icons:
The TCP/IP folder on the OS/2 desktop
The TCP/IP icons inside of the TCP/IP folder
The TCPSTART icon inside the Autostart folder
The FTP, Telnet, and 3270 Telnet icons inside the Templates folder
The tcpdsktp command may create additional icons, depending on which TCP/IP
components you installed.
ΓöÇΓöÇtcpdsktpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ/sfΓöÇ Γöÿ
ΓòÉΓòÉΓòÉ <hidden> /sf- ΓòÉΓòÉΓòÉ
Specifies that TCPSTART will be added to the STARTUP.CMD file. If you omit
/sf-, TCPSTART is added to the Startup folder, and removed from the STARTUP.CMD
file (if it is there).
ΓòÉΓòÉΓòÉ 74. tcphelp Command ΓòÉΓòÉΓòÉ
The tcphelp command opens the online TCP/IP for OS/2 Command Reference.
ΓöÇΓöÇtcphelpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇcommand_nameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> command_name ΓòÉΓòÉΓòÉ
Specifies the name of the command you want to view.
ΓòÉΓòÉΓòÉ 75. tcpipcfg Command ΓòÉΓòÉΓòÉ
The tcpipcfg command opens the TCP/IP configuration notebook. With the
configuration notebook, you can configure your TCP/IP network connections and
customize your TCP/IP applications according to your preferences.
ΓöÇΓöÇtcpipcfgΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
h1 res=201340 id=qrgtel global group=1.telnet Command
The telnet command logs you on to a remote host, emulating one of the following
terminal types:
VT220[**]
VT100[**]
ANSI
NVT (network virtual terminal)
If you do not specify a host on the telnet command, you enter the Telnet
command shell. In the command shell, you can establish the operating
environment and designate the host and port to which you want to connect.
ΓöÇΓöÇtelnetΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇd filenameΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇl filenameΓöÇΓöÿ
ΓöîΓöÇ ΓöÇc TCPCODEPΓöÇΓöÉ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇf configfileΓöÇΓöÿ ΓööΓöÇ ΓöÇc codepageΓöÇΓöÿ ΓööΓöÇ ΓöÇu underlineΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇk keyboardΓöÇΓöÿ ΓööΓöÇ ΓöÇo printer_portΓöÇΓöÿ ΓööΓöÇ ΓöÇh heightΓöÇΓöÿ
ΓöîΓöÇ;ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö┤ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇw widthΓöÇΓöÿ ΓööΓöÇ ΓöÇe environmentΓöÇΓöÿ ΓööΓöÇ ΓöÇp portΓöÇΓöÿ
ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇt termtypeΓöÇΓöÿ ΓööΓöÇhostnameΓöÇΓöÿ
Subcommands
ΓòÉΓòÉΓòÉ <hidden> VT220 ΓòÉΓòÉΓòÉ
VT220 is a trademark of Digital Equipment Corporation.
ΓòÉΓòÉΓòÉ <hidden> VT100 ΓòÉΓòÉΓòÉ
VT100 is a trademark of Digital Equipment Corporation
ΓòÉΓòÉΓòÉ <hidden> -d filename ΓòÉΓòÉΓòÉ
Sets debugging on and specifies the fully-qualified file name to be used during
debugging. This parameter is useful when diagnosing problems.
ΓòÉΓòÉΓòÉ <hidden> -l filename ΓòÉΓòÉΓòÉ
Sets logging on and specifies the fully-qualified file name to be used during
logging. When logging is on and you specify a logfile, a log is kept of the
Telnet session.
ΓòÉΓòÉΓòÉ <hidden> -f configfile ΓòÉΓòÉΓòÉ
Specifies the name of a configuration file in the TCPIP\ETC subdirectory to use
for establishing a customized keyboard mapping. Specify the configfile with the
file name only; do not specify the path or extension. Users who need to remap
the keyboard can create this file using the setterm command. You can create or
change the configfile by using the setterm command.
ΓòÉΓòÉΓòÉ <hidden> -c codepage ΓòÉΓòÉΓòÉ
Specifies the ASCII codepage used by the remote host. The default is TCPCODEP,
which uses the DEC[**] Multinational codepage. Other possible pages are TCP8859
for ISO 8859 codepage, or NONE for PC codepage 850.
ΓòÉΓòÉΓòÉ <hidden> -u underline ΓòÉΓòÉΓòÉ
Specifies the screen attribute for the underscore character. This value is used
only with VT100 and VT220 terminal types, and only when the Telnet program is
run in a window. Valid values are:
1 Blue
2 Green (the default)
3 Cyan
4 Red
5 Magenta
6 Yellow
7 Gray
ΓòÉΓòÉΓòÉ <hidden> -k keyboard ΓòÉΓòÉΓòÉ
Specifies emulation of a VT220 national keyboard. Valid values are:
1 North American (the default)
2 British
3 Flemish
4 French Canadian
5 Danish
6 Finnish
7 German
8 Dutch
9 Italian
10 Swiss (French)
11 Swiss (German)
12 Swedish
13 Norwegian
14 French/Belgian
15 Spanish
ΓòÉΓòÉΓòÉ <hidden> -o printer_port ΓòÉΓòÉΓòÉ
Specifies a supported local printer port name. The supported printer port names
are PRN, LPT1, LPT2, and LPT3. PRN is the default printer port name.
ΓòÉΓòÉΓòÉ <hidden> -h height ΓòÉΓòÉΓòÉ
Specifies the number of rows displayed on the host screen.
The valid values are 24, 25, 43, and 50.
ΓòÉΓòÉΓòÉ <hidden> -w width ΓòÉΓòÉΓòÉ
Specifies the number of columns displayed on the host screen.
For VGA or BGA screens, the valid value is 80.
An additional valid value for XGA or SVGA screens is 132 under full screen
mode.
Telnet attempts to negotiate the specified width and height with the host. If
the parameters are not accepted by the host, Telnet will use the default screen
size which is 24 x 80 for VT100 and VT220 and 25 x 80 for ANSI and NVT.
ΓòÉΓòÉΓòÉ <hidden> -e environment ΓòÉΓòÉΓòÉ
Specifies a list of environment variables and values to be exported to the
host. Specify the environment string using the following format:
name=value;name=value;name=value ...
Do not put any spaces between the entries.
ΓòÉΓòÉΓòÉ <hidden> -p port ΓòÉΓòÉΓòÉ
Specifies a port number (the address of an application) or a name.
If a port is not specified, the default Telnet port is used. Port names are
mapped to port numbers by a services file.
ΓòÉΓòÉΓòÉ <hidden> -t termtype ΓòÉΓòÉΓòÉ
Specifies a terminal type to emulate in communicating with the remote host.
Telnet supports:
VT220
VT100
ANSI
NVT
If you do not specify a terminal type, Telnet will try to do terminal type
negotiation with the remote host. The terminal negotiation order is shown
above.
ΓòÉΓòÉΓòÉ <hidden> hostname ΓòÉΓòÉΓòÉ
Specifies the name, alias, or internet address of a remote host.
ΓòÉΓòÉΓòÉ <hidden> port ΓòÉΓòÉΓòÉ
Specifies a port number (the address of an application) or a name. If a port is
not specified, the default Telnet port is used. Port names are mapped to port
numbers by the services file.
ΓòÉΓòÉΓòÉ <hidden> Telnet Subcommands ΓòÉΓòÉΓòÉ
The following subcommands can be used in the telnet command shell.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöéclose Γöédisplay Γöéemulate Γöéenviron Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéhelp Γöéopen Γöéquit Γöésend Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéset Γöéstatus Γöétoggle Γöé? Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> close Subcommand ΓòÉΓòÉΓòÉ
The close subcommand disconnects you from the current Telnet server with which
you are connected.
ΓöÇΓöÇcloseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> display Subcommand ΓòÉΓòÉΓòÉ
The display subcommand displays the current settings for all the set and toggle
parameters.
ΓöÇΓöÇdisplayΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> emulate Subcommand ΓòÉΓòÉΓòÉ
The emulate subcommand allows you to specify the type of emulator you will use
before you open the session.
ΓöÇΓöÇemulateΓöÇΓöÇtermtypeΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Displaying emulate help
ΓöÇΓöÇ?ΓöÇΓöÇemulateΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> termtype ΓòÉΓòÉΓòÉ
The following terminal types are supported:
VT220
VT100
ANSI
NVT
If you do not specify a terminal type, Telnet will try to do terminal type
negotiation with the remote host. The terminal type negotiation order is shown
above.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the emulate subcommand.
ΓòÉΓòÉΓòÉ <hidden> environ Subcommand ΓòÉΓòÉΓòÉ
The environ subcommand designates the environment variables sent to the server.
The initial set of environment variables is taken from your environment.
ΓöÇΓöÇenvironΓöÇΓöÇΓö¼ΓöÇdefine option valueΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇname=valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇundefine optionsΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇexport optionsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇunexport optionΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇlistΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying environ help
ΓöÇΓöÇenvironΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the environ subcommand.
ΓòÉΓòÉΓòÉ <hidden> define option value ΓòÉΓòÉΓòÉ
Defines the variable option to have a specific value. Any variables defined by
this subcommand are automatically exported. The value can be enclosed in single
or double quotes so that tabs and spaces can be included.
ΓòÉΓòÉΓòÉ <hidden> name=value ΓòÉΓòÉΓòÉ
Attempts to export an environment setting to the remote host. Not all hosts
support this function.
ΓòÉΓòÉΓòÉ <hidden> undefine options ΓòÉΓòÉΓòÉ
Removes the options specified from the list of environment variables.
ΓòÉΓòÉΓòÉ <hidden> export options ΓòÉΓòÉΓòÉ
Marks the options that are to be exported to the remote host.
ΓòÉΓòÉΓòÉ <hidden> unexport option ΓòÉΓòÉΓòÉ
Marks the option that is not to be exported unless explicitly requested by the
remote host.
ΓòÉΓòÉΓòÉ <hidden> list ΓòÉΓòÉΓòÉ
Lists the current set of environment variables. Those marked with an asterisk
(*) are sent automatically. The other variables in the list are sent only if
explicitly requested.
ΓòÉΓòÉΓòÉ <hidden> help Subcommand ΓòÉΓòÉΓòÉ
The help subcommand displays help information for theTelnet command shell.
Using the help subcommand is the same as issuing the ? subcommand.
ΓöÇΓöÇhelpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies the subcommand for which you are requesting help.
ΓòÉΓòÉΓòÉ <hidden> open Subcommand ΓòÉΓòÉΓòÉ
The open subcommand establishes a connection between your workstation and a
remote host.
ΓöÇΓöÇopenΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇΓöÇp portΓöÇΓöÿ ΓööΓöÇhostΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -p port ΓòÉΓòÉΓòÉ
Specifies the destination port to which you are connecting. If you do not
specify a port, you are connected to the well-known Telnet port.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the host name or an internet address in dotted decimal notation. If
you do not specify this value, Telnet will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> quit Subcommand ΓòÉΓòÉΓòÉ
The quit subcommand ends the terminal emulation session, disconnects any
connected host and exits the Telnet command shell.
ΓöÇΓöÇquitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> send Subcommand ΓòÉΓòÉΓòÉ
The send subcommand transmits special characters to the Telnet server.
ΓöÇΓöÇsendΓöÇΓöÇΓö¼ΓöÇaoΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇaytΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇbrkΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinterruptΓöÇΓöñ
ΓööΓöÇsynchΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying send Help
ΓöÇΓöÇΓöÇ?ΓöÇΓöÇsendΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the send subcommand.
ΓòÉΓòÉΓòÉ <hidden> ao ΓòÉΓòÉΓòÉ
Sends the Telnet ao (abort output) sequence, which causes the remote system to
move all output from the remote system to the user's workstation.
ΓòÉΓòÉΓòÉ <hidden> ayt ΓòÉΓòÉΓòÉ
Sends the Telnet ayt (are you there) sequence, to which the remote system can
respond.
ΓòÉΓòÉΓòÉ <hidden> brk ΓòÉΓòÉΓòÉ
Sends the Telnet brk (break) sequence, which can have significance to the
remote system.
ΓòÉΓòÉΓòÉ <hidden> interrupt ΓòÉΓòÉΓòÉ
Sends the Telnet abort (end processes) sequence.
ΓòÉΓòÉΓòÉ <hidden> synch ΓòÉΓòÉΓòÉ
Sends the Telnet synch sequence. This sequence causes the remote system to
discard all previously typed (but not yet read) input. This sequence is sent as
TCP urgent data and might not work if the remote system is a 4.2 BSD system. If
it does not work, a lowercase r might be echoed on your workstation.
ΓòÉΓòÉΓòÉ <hidden> set Subcommand ΓòÉΓòÉΓòÉ
The set subcommand defines the keystrokes that translate into send instructions
or sets the value to true. For example, if you set interrupt to the value ^I
(Control I), then issue Ctrl + I, the client sends a Telnet interrupt to the
server. The value of off turns off the function associated with the variable.
Note: localchars must be toggled on for the translation to work. If
localchars is not toggled on, the client passes the keystrokes to the server
unchanged.
ΓöÇΓöÇsetΓöÇΓöÇΓö¼ΓöÇeraseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇvalueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇescapeΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇflushoutputΓöÇΓöñ
Γö£ΓöÇinterruptΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇkillΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇquitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying set Help
ΓöÇΓöÇsetΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> emulate ΓòÉΓòÉΓòÉ
Specifies a supported emulator to be used for the host connection.
ΓòÉΓòÉΓòÉ <hidden> erase ΓòÉΓòÉΓòÉ
Erases a character (sends ec).
ΓòÉΓòÉΓòÉ <hidden> escape ΓòÉΓòÉΓòÉ
Defines the current escape character.
ΓòÉΓòÉΓòÉ <hidden> flushoutput ΓòÉΓòÉΓòÉ
Sends a Telnet ao (abort output) sequence to the remote host, if Telnet is in
localchars mode.
ΓòÉΓòÉΓòÉ <hidden> interrupt ΓòÉΓòÉΓòÉ
Interrupts a character (sends ip).
ΓòÉΓòÉΓòÉ <hidden> kill ΓòÉΓòÉΓòÉ
Erases a line (sends el).
ΓòÉΓòÉΓòÉ <hidden> quit ΓòÉΓòÉΓòÉ
Sets a break character (sends brk).
ΓòÉΓòÉΓòÉ <hidden> reprint ΓòÉΓòÉΓòÉ
Specifies the character to be taken as the terminal's reprint character.
ΓòÉΓòÉΓòÉ <hidden> rlogin ΓòÉΓòÉΓòÉ
Specifies the rlogin escape character. If set, the Telnet escape character is
ignored unless it is preceded by this character. This character, followed by a
period (.) at the beginning of the line, closes the connection. When followed
by a ^Z, it suspends the telnet command. The initial setting is to have the
rlogin escape character disabled.
ΓòÉΓòÉΓòÉ <hidden> susp ΓòÉΓòÉΓòÉ
Sends a Telnet susp (suspend process) sequence to the remote host if Telnet is
in localchars mode, or LINEMODE is enabled, and the suspend character is typed.
ΓòÉΓòÉΓòÉ <hidden> tracefile ΓòÉΓòÉΓòÉ
Specifies the file to which the output, caused by netdata, termdata, or option
tracing being true, is written. If you do not specify this key sequence, the
start sequence is - and tracing information is written to standard output.
ΓòÉΓòÉΓòÉ <hidden> value ΓòÉΓòÉΓòÉ
Specifies the key sequence to use for the Telnet instruction.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the set subcommand.
ΓòÉΓòÉΓòÉ <hidden> status Subcommand ΓòÉΓòÉΓòÉ
The status subcommand displays the current status of the Telnet connection or
operating mode.
ΓöÇΓöÇstatusΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> toggle Subcommand ΓòÉΓòÉΓòÉ
The toggle subcommand toggles the operating parameters.
ΓöÇΓöÇtoggleΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇautoflushΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇbsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇcrlfΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇcrmodΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇdebugΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇlocalcharsΓöÇΓöñ
Γö£ΓöÇlogΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇwrapΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying toggle Help
ΓöÇΓöÇtoggleΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> autoflush ΓòÉΓòÉΓòÉ
If autoflush and localchars are both true, when the ao (abort output) or quit
characters are recognized and transformed into Telnet sequences, Telnet will
not display any data on the user's workstation until the remote system
acknowledges that it has processed those Telnet sequences. The initial setting
is true.
ΓòÉΓòÉΓòÉ <hidden> bs ΓòÉΓòÉΓòÉ
Toggles the sending of the backspace key value as an ASCII delete character
(X'7F) or as a backspace character (X'08'). The initial setting sends the
backspace key as a backspace character.
ΓòÉΓòÉΓòÉ <hidden> crlf ΓòÉΓòÉΓòÉ
If this is true, carriage returns (CR) are sent as carriage return line feed
(CRLF). If this is false, carriage returns are sent as carriage return null
(CRNUL). The initial setting is false.
ΓòÉΓòÉΓòÉ <hidden> crmod ΓòÉΓòÉΓòÉ
Toggles carriage return mode. When this mode is enabled, carriage return
characters received from the remote host are mapped into a carriage return
followed by a line feed. This mode affects only those characters received from
the remote host. Use this mode when the remote host sends only carriage return,
never line feed. The initial setting is false.
ΓòÉΓòÉΓòÉ <hidden> debug ΓòÉΓòÉΓòÉ
Toggles the recording of session debugging information. If you did not specify
a debug filename when you started Telnet, you will be prompted to specify one.
ΓòÉΓòÉΓòÉ <hidden> localchars ΓòÉΓòÉΓòÉ
If this is true, the flush, interrupt, quit, erase, and kill characters are
recognized locally and transformed into appropriate Telnet control sequences.
ΓòÉΓòÉΓòÉ <hidden> log ΓòÉΓòÉΓòÉ
Toggles the recording of logging information. If you did not specify a logging
filename when you started Telnet, you will be prompted to specify one.
ΓòÉΓòÉΓòÉ <hidden> wrap ΓòÉΓòÉΓòÉ
Toggles wrap on and off. The initial setting is on.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the toggle subcommand.
ΓòÉΓòÉΓòÉ <hidden> ? Subcommand ΓòÉΓòÉΓòÉ
The ? subcommand displays help information for theTelnet command shell. Using
the ? subcommand is the same as issuing the help subcommand.
ΓöÇΓöÇ?ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies the subcommand for which you are requesting help.
ΓòÉΓòÉΓòÉ 76. telnetd Command ΓòÉΓòÉΓòÉ
The telnetd command starts the Telnet server on your local host. The telnetd
command starts the TELNETD.EXE program and runs as a task until you shut down
the server.
ΓöÇΓöÇtelnetdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇp portΓöÇΓöÿ ΓööΓöÇ ΓöÇbΓöÇΓöÿ ΓööΓöÇ ΓöÇdΓöÇΓöÿ ΓööΓöÇ ΓöÇlΓöÇΓöÿ
ΓöîΓöÇ ΓöÇe 50ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇ ΓöÇu telnet_passwordΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇe escapedelayΓöÇΓöÿ ΓööΓöÇ ΓöÇu passwordΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇc <codepage>ΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -p port ΓòÉΓòÉΓòÉ
Specifies the port that Telnetd is to use. If no port is specified,Telnetd uses
the well-known Telnet port.
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Specifies that the copyright information is to be printed.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Specifies that debugging is to take place and error messages displayed.
ΓòÉΓòÉΓòÉ <hidden> -l ΓòÉΓòÉΓòÉ
Specifies that a log of the Telnetd messages is created.
ΓòÉΓòÉΓòÉ <hidden> -e escapedelay ΓòÉΓòÉΓòÉ
Specifies the time delay for an escape from a Telnet session. The default is
50.
ΓòÉΓòÉΓòÉ <hidden> -u password ΓòÉΓòÉΓòÉ
Specifies your password on the remote host. The default is the Telnet password
set in the environment variables. If this parameter is not specified and the
password is not set in the environment variables, you will receive an error
message.
ΓòÉΓòÉΓòÉ <hidden> -c <codepage> ΓòÉΓòÉΓòÉ
Specifies the ASCII codepage used by the remote host. If you do not specify a
codepage, the data is sent untranslated. The possible values are:
TCPDECMU for the DEC Multinational codepage
TCP8859 for ISO 8859 codepage
NONE for PC codepage 850
ΓòÉΓòÉΓòÉ 77. telneto Command ΓòÉΓòÉΓòÉ
The telneto command logs you on to a remote host using VT220 terminal
emulation.
Note: Use this command if you need the Telnet linemode option. The linemode
option edits a full line of input and sends it to the remote host. Use this
option to improve response time and performance. TelnetPM simulates linemode,
providing an equivalent function.
If a host is not specified on the telneto command, you enter the Telnet command
shell. In the Telnet command shell, you can establish the operating environment
and designate the host and port to which you want to connect.
ΓöÇΓöÇtelnetoΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇ8ΓöÇΓöÿ ΓööΓöÇ ΓöÇEΓöÇΓöÿ ΓööΓöÇ ΓöÇLΓöÇΓöÿ ΓööΓöÇ ΓöÇcΓöÇΓöÿ ΓööΓöÇ ΓöÇdΓöÇΓöÿ
ΓöîΓöÇ ΓöÇu 1ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝Γö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼
Γöö ΓöÇe escape_charΓöÇΓöÿ Γöö ΓöÇn tracefileΓöÇΓöÿ ΓööΓöÇ ΓöÇrΓöÇΓöÿΓööΓöÇ ΓöÇu attribΓöÿΓööΓöÇ ΓöÇNΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇportΓöÇΓöÿ
Subcommands
ΓòÉΓòÉΓòÉ <hidden> -8 ΓòÉΓòÉΓòÉ
Specifies an 8-bit data path. This causes an attempt to negotiate the binary
option on both input and output.
ΓòÉΓòÉΓòÉ <hidden> -E ΓòÉΓòÉΓòÉ
Prevents any character from being recognized as an escape character.
ΓòÉΓòÉΓòÉ <hidden> -L ΓòÉΓòÉΓòÉ
Specifies an 8-bit data path on output. This causes the binary option to be
negotiated on output.
ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ
Disables the reading of the user's TELNET.RC file.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Sets the initial value of the debugging toggle to on.
ΓòÉΓòÉΓòÉ <hidden> -e escape_char ΓòÉΓòÉΓòÉ
Sets the initial Telnet escape character to escape_char. If this parameter is
not specified, the default is ^].
ΓòÉΓòÉΓòÉ <hidden> -n tracefile ΓòÉΓòÉΓòÉ
Opens the trace file for recording trace information.
ΓòÉΓòÉΓòÉ <hidden> -r ΓòÉΓòÉΓòÉ
Specifies a user interface similar to rlogin. In this mode, the escape
character is set to the tilde (~), unless modified by the -e parameter. When in
rlogin mode, a line of the form tilde (~".") disconnects you from the remote
host. This is similar to the line ~^Z, which also suspends the Telnet session.
ΓòÉΓòÉΓòÉ <hidden> -u attrib ΓòÉΓòÉΓòÉ
Replaces the default highlighting for data that is displayed with the
underscore attribute on. The default is 1, which displays the data dark blue on
a color screen and underlined on a monochrome screen. Valid values for attrib
are 1-7.
ΓòÉΓòÉΓòÉ <hidden> -N ΓòÉΓòÉΓòÉ
Ignores the 8th bit of data when in VT220 7-bit mode. Unless you specify -N,
this bit is honored when interpreted as a VT220 data stream.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the name, alias, or internet address of a remote host.
ΓòÉΓòÉΓòÉ <hidden> port ΓòÉΓòÉΓòÉ
Specifies a port number (the address of an application) or a name. If a number
is not specified, the default Telnet port is used.
Port names are mapped to port numbers by the services file. When a port number
is specified, telneto does not send out any initial Telnet option negotiation.
If the port number or name is preceded by a minus sign, the initial Telnet
option negotiation is sent.
ΓòÉΓòÉΓòÉ <hidden> Telneto Subcommands ΓòÉΓòÉΓòÉ
The following subcommands can be used in the telneto command shell.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé! Γöéclose Γöédisplay Γöéenviron Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéhelp Γöélogout Γöémode Γöéopen Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéquit Γöésend Γöéset Γöéslc Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéstatus Γöétoggle Γöéunset Γöé? Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> ! Subcommand ΓòÉΓòÉΓòÉ
The ! subcommand enters the OS/2 command processor while keeping the Telneto
command shell in resident memory. This subcommand can also invoke the OS/2
command shell to issue a single command and immediately return to Telneto.
If you enter the ! subcommand without parameters, you will enter an OS/2
command shell. To return to the Telnet command shell from the OS/2 command
shell, type
EXIT
ΓöÇΓöÇ!ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇcommandΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇparametersΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> command ΓòÉΓòÉΓòÉ
Specifies the OS/2 command that you want to issue.
ΓòÉΓòÉΓòÉ <hidden> parameters ΓòÉΓòÉΓòÉ
Specifies any parameters that are required by the OS/2 command.
ΓòÉΓòÉΓòÉ <hidden> close Subcommand ΓòÉΓòÉΓòÉ
The close subcommand disconnects you from the current Telnet server with which
you are connected. Using the close subcommand is the same as issuing the logout
subcommand.
ΓöÇΓöÇcloseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> display Subcommand ΓòÉΓòÉΓòÉ
The display subcommand displays the current settings for the operating
parameters.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇdisplayΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇargumentΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> argument ΓòÉΓòÉΓòÉ
Enables you to specify any of the set and toggle parameters. If you do not
specify a value, Telneto displays all the values that you can specify.
ΓòÉΓòÉΓòÉ <hidden> environ Subcommand ΓòÉΓòÉΓòÉ
The environ subcommand designates the environment variables sent to the server.
The initial set of environment variable is taken from your environment.
ΓöÇΓöÇenvironΓöÇΓöÇΓö¼ΓöÇdefine option valueΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇundefine optionsΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇexport optionsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇunexport optionΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇsendΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇlistΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying environ Help
ΓöÇΓöÇenvironΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the environ subcommand.
ΓòÉΓòÉΓòÉ <hidden> define option value ΓòÉΓòÉΓòÉ
Defines the variable option to have a specific value. Any variables defined by
this subcommand are automatically exported. The value can be enclosed in single
or double quotes so that tabs and spaces can be included.
ΓòÉΓòÉΓòÉ <hidden> undefine options ΓòÉΓòÉΓòÉ
Removes the options specified from the list of environment variables.
ΓòÉΓòÉΓòÉ <hidden> export options ΓòÉΓòÉΓòÉ
Marks the options that are to be exported to the remote host.
ΓòÉΓòÉΓòÉ <hidden> unexport option ΓòÉΓòÉΓòÉ
Marks the option that is not to be exported unless explicitly asked for by the
remote host.
ΓòÉΓòÉΓòÉ <hidden> send ΓòÉΓòÉΓòÉ
Sends an environment variable.
ΓòÉΓòÉΓòÉ <hidden> list ΓòÉΓòÉΓòÉ
Lists the current set of environment variables. Those marked with an asterisk
(*) are sent automatically. The other variables in the list are sent only if
explicitly requested.
ΓòÉΓòÉΓòÉ <hidden> help Subcommand ΓòÉΓòÉΓòÉ
The help subcommand displays help information for the Telneto command shell.
Using the help subcommand is the same as issuing the ? subcommand.
ΓöÇΓöÇhelpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
Specifies the subcommand for which you are requesting help.
ΓòÉΓòÉΓòÉ <hidden> logout Subcommand ΓòÉΓòÉΓòÉ
The logout subcommand disconnects you from the current Telnet server to which
you are connected. Using the logout subcommand is the same as issuing the close
subcommand.
ΓöÇΓöÇlogoutΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> mode Subcommand ΓòÉΓòÉΓòÉ
The mode subcommand changes the mode type of the remote host.
ΓöÇΓöÇmodeΓöÇΓöÇΓö¼ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇcharacterΓöÇΓöñ
Γö£ΓöÇlineΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇisigΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ ΓöÇisigΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeditΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ ΓöÇeditΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇsofttabsΓöÇΓöÇΓöñ
Γö£ΓöÇ ΓöÇsofttabsΓöñ
Γö£ΓöÇlitechoΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇ ΓöÇlitechoΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the mode subcommand.
ΓòÉΓòÉΓòÉ <hidden> character ΓòÉΓòÉΓòÉ
Disables the Telnet LINEMODE option. If the remote host does not understand the
LINEMODE option, enter the character-at-a-time mode.
ΓòÉΓòÉΓòÉ <hidden> line ΓòÉΓòÉΓòÉ
Enables the Telnet LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> isig ΓòÉΓòÉΓòÉ
Enables the TRAPSIG mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> -isig ΓòÉΓòÉΓòÉ
Disables the TRAPSIG mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> edit ΓòÉΓòÉΓòÉ
Enables the EDIT mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> -edit ΓòÉΓòÉΓòÉ
Disables the EDIT mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> softtabs ΓòÉΓòÉΓòÉ
Enables the SOFT_TAB mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> -softtabs ΓòÉΓòÉΓòÉ
Disables the SOFT_TAB mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> litecho ΓòÉΓòÉΓòÉ
Enables the LIT_ECHO mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> -litecho ΓòÉΓòÉΓòÉ
Disables the LIT_ECHO mode of the LINEMODE option.
ΓòÉΓòÉΓòÉ <hidden> open Subcommand ΓòÉΓòÉΓòÉ
The open subcommand establishes a connection between your workstation and a
remote host.
ΓöÇΓöÇopenΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
Γö£ΓöÇ ΓöÇportΓöÇΓöñ
ΓööΓöÇportΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the host name or an internet address in dotted decimal notation. If
you do not specify this value, Telneto will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> -port ΓòÉΓòÉΓòÉ
Specifies that, when the port number is preceded by the minus sign, the initial
option negotiation is done.
ΓòÉΓòÉΓòÉ <hidden> port ΓòÉΓòÉΓòÉ
Specifies the destination port to which you are connecting. If you do not
specify a port, you are connected to the well-known Telnet port.
ΓòÉΓòÉΓòÉ <hidden> quit Subcommand ΓòÉΓòÉΓòÉ
The quit subcommand ends the terminal emulation session, disconnects any
connected host, and exits the Telneto command shell.
ΓöÇΓöÇquitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> send Subcommand ΓòÉΓòÉΓòÉ
The send subcommand transmits special characters to the Telnet server.
ΓöÇΓöÇsendΓöÇΓöÇΓö¼ΓöÇabortΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇaoΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇaytΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇbrkΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇecΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇelΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeofΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeorΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇescapeΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇgaΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇgetstatusΓöÇΓöñ
Γö£ΓöÇipΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇnopΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇsuspΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇsynchΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying send Help
ΓöÇΓöÇsendΓöÇΓöÇ ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the send subcommand.
ΓòÉΓòÉΓòÉ <hidden> abort ΓòÉΓòÉΓòÉ
Sends the Telnet abort (end processes) sequence.
ΓòÉΓòÉΓòÉ <hidden> ao ΓòÉΓòÉΓòÉ
Sends the Telnet ao (abort output) sequence, which causes the remote system to
move all output from the remote system to the user's workstation.
ΓòÉΓòÉΓòÉ <hidden> ayt ΓòÉΓòÉΓòÉ
Sends the Telnet ayt (are you there) sequence, to which the remote system can
respond.
ΓòÉΓòÉΓòÉ <hidden> brk ΓòÉΓòÉΓòÉ
Sends the Telnet brk (break) sequence, which can have significance to the
remote system.
ΓòÉΓòÉΓòÉ <hidden> ec ΓòÉΓòÉΓòÉ
Sends the Telent ec (erase character) sequence, which causes the remote system
to erase the last character entered.
ΓòÉΓòÉΓòÉ <hidden> el ΓòÉΓòÉΓòÉ
Sends the Telnet el (erase line) sequence, which causes the remote system to
erase the line currently being entered.
ΓòÉΓòÉΓòÉ <hidden> eof ΓòÉΓòÉΓòÉ
Sends the Telnet eof (end of file) sequence.
ΓòÉΓòÉΓòÉ <hidden> eor ΓòÉΓòÉΓòÉ
Sends the Telent eor (end of record) sequence.
ΓòÉΓòÉΓòÉ <hidden> escape ΓòÉΓòÉΓòÉ
Sends the current Telnet escape character. The initial setting of the escape
character is the caret (^).
ΓòÉΓòÉΓòÉ <hidden> ga ΓòÉΓòÉΓòÉ
Sends the Telnet ga (go ahead) sequence.
ΓòÉΓòÉΓòÉ <hidden> getstatus ΓòÉΓòÉΓòÉ
Sends the subnegotiation to request that the server send its current option
status if the remote host supports the Telneto status subcommand.
ΓòÉΓòÉΓòÉ <hidden> ip ΓòÉΓòÉΓòÉ
Sends theTelnet ip (interrupt process) sequence, which causes the remote system
to end the current process abnormally.
ΓòÉΓòÉΓòÉ <hidden> nop ΓòÉΓòÉΓòÉ
Sends the Telnet nop (no operation) sequence.
ΓòÉΓòÉΓòÉ <hidden> susp ΓòÉΓòÉΓòÉ
Sends the Telnet susp (suspend process) sequence.
ΓòÉΓòÉΓòÉ <hidden> synch ΓòÉΓòÉΓòÉ
Sends the Telnet synch sequence. This sequence causes the remote system to
discard all previously typed (but not yet read) input. This sequence is sent as
TCP urgent data and might not work if the remote system is a 4.2 BSD system. If
it does not work, a lowercase r might be echoed on your workstation.
ΓòÉΓòÉΓòÉ <hidden> set Subcommand ΓòÉΓòÉΓòÉ
The set command defines the keystrokes that translate into send instructions or
sets the value to true. For example, if you set interrupt to the value ^I
(Control I), then issue Ctrl + I, the client sends a Telnet interrupt to the
server. The value of off turns off the function associated with the variable
and is the equivalent to using the unset subcommand.
Note: localchars must be toggled on for the translation to work. If
localchars is not toggled on, the client passes the keystrokes to the server
unchanged.
ΓöÇΓöÇsetΓöÇΓöÇΓö¼ΓöÇautoflushΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇautosynchΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇayt valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇbinaryΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇbsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇcrlfΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇcrmodΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇdebugΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇebol valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇecho valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇecr valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeeol valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeof valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇerase valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇescape valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇewr valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇewl valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇflushoutput valueΓöÇΓöñ
Γö£ΓöÇforw1 valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇforw2 valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinbinaryΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinsrt valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinterrupt valueΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇkill valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇlnext valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇlocalcharsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcbol valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmceol valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcl valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcr valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcwl valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcwr valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇnetdataΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇoptionsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇoutbinaryΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇover valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇprettydumpΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇquit valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇreprint valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇrlogin valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇskiprcΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇstart valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇstop valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇsusp valueΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇtracefile valueΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇworderase valueΓöÇΓöÇΓöÇΓöÿ
Displaying set Help
ΓöÇΓöÇsetΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> autoflush ΓòÉΓòÉΓòÉ
Specifies that deleting of output occurs when sending interrupt characters.
ΓòÉΓòÉΓòÉ <hidden> autosynch ΓòÉΓòÉΓòÉ
Specifies automatic sending of interrupt characters in urgent mode.
ΓòÉΓòÉΓòÉ <hidden> ayt ΓòÉΓòÉΓòÉ
Sets the key sequence to send a Telnet ayt.
ΓòÉΓòÉΓòÉ <hidden> binary ΓòÉΓòÉΓòÉ
Specifies that the sending and receiving of data is binary.
ΓòÉΓòÉΓòÉ <hidden> bs ΓòÉΓòÉΓòÉ
Changes the backspace key from an ASCII backspace to an ASCII delete.
ΓòÉΓòÉΓòÉ <hidden> crlf ΓòÉΓòÉΓòÉ
Specifies that carriage returns are sent as Telnet <CR><LF>.
ΓòÉΓòÉΓòÉ <hidden> crmod ΓòÉΓòÉΓòÉ
Starts the mapping of received carriage returns.
ΓòÉΓòÉΓòÉ <hidden> debug ΓòÉΓòÉΓòÉ
Starts debugging in Telneto.
ΓòÉΓòÉΓòÉ <hidden> ebol ΓòÉΓòÉΓòÉ
Defines the erase-to-beginning-of-line character.
ΓòÉΓòÉΓòÉ <hidden> echo ΓòÉΓòÉΓòÉ
Sets the key sequence to toggle between local echoing of entered characters
(for normal processing) and suppressing echoing of entered characters (for
example, a password) when in line mode. If you do not specify this key
sequence, the echo sequence is ^E.
ΓòÉΓòÉΓòÉ <hidden> ecr ΓòÉΓòÉΓòÉ
Defines the character for deleting a character to the right.
ΓòÉΓòÉΓòÉ <hidden> eeol ΓòÉΓòÉΓòÉ
Defines the character for deleting to end of the line.
ΓòÉΓòÉΓòÉ <hidden> eof ΓòÉΓòÉΓòÉ
Specifies the character to be sent to the remote system when it is the first
character on a line. If you do not specify this key sequence, the eof sequence
is ^Z.
ΓòÉΓòÉΓòÉ <hidden> erase ΓòÉΓòÉΓòÉ
Sets the key sequence to cause an erase character to be sent.
ΓòÉΓòÉΓòÉ <hidden> escape ΓòÉΓòÉΓòÉ
Defines the current escape character.
ΓòÉΓòÉΓòÉ <hidden> ewr ΓòÉΓòÉΓòÉ
Defines the character for deleting a character to the left.
ΓòÉΓòÉΓòÉ <hidden> ewl ΓòÉΓòÉΓòÉ
Defines the character for deleting a word to the left.
ΓòÉΓòÉΓòÉ <hidden> flushoutput ΓòÉΓòÉΓòÉ
Sets the key sequence to send a Telnet ao (abort output) sequence to the remote
host, if Telneto is in localchars mode.
ΓòÉΓòÉΓòÉ <hidden> forw1, forw2 ΓòÉΓòÉΓòÉ
Sets the key sequence to forward partial lines to the remote system.
ΓòÉΓòÉΓòÉ <hidden> inbinary ΓòÉΓòÉΓòÉ
Specifies that data being received is binary.
ΓòÉΓòÉΓòÉ <hidden> insrt ΓòÉΓòÉΓòÉ
Defines the character for entering insert mode.
ΓòÉΓòÉΓòÉ <hidden> interrupt ΓòÉΓòÉΓòÉ
Sets the key sequence to send an interrupt character (sends ip).
ΓòÉΓòÉΓòÉ <hidden> kill ΓòÉΓòÉΓòÉ
Sets the key sequence to send an erase line (sends el).
ΓòÉΓòÉΓòÉ <hidden> lnext ΓòÉΓòÉΓòÉ
Specifies the character to be taken as the terminal's next character.
ΓòÉΓòÉΓòÉ <hidden> localchars ΓòÉΓòÉΓòÉ
Starts the local recognition of certain control characters.
ΓòÉΓòÉΓòÉ <hidden> mcbol ΓòÉΓòÉΓòÉ
Defines the character for moving the cursor to the beginning of the line.
ΓòÉΓòÉΓòÉ <hidden> mceol ΓòÉΓòÉΓòÉ
Defines the character for moving the cursor to the end of the line.
ΓòÉΓòÉΓòÉ <hidden> mcl ΓòÉΓòÉΓòÉ
Defines the character for moving the cursor to the left one character.
ΓòÉΓòÉΓòÉ <hidden> mcr ΓòÉΓòÉΓòÉ
Defines the character for moving the cursor to the right one character.
ΓòÉΓòÉΓòÉ <hidden> mcwl ΓòÉΓòÉΓòÉ
Defines the character for moving the cursor to the left one word.
ΓòÉΓòÉΓòÉ <hidden> mcwr ΓòÉΓòÉΓòÉ
Defines the character for moving the cursor to the right one word.
ΓòÉΓòÉΓòÉ <hidden> netdata ΓòÉΓòÉΓòÉ
Specifies that printing of hexadecimal representation of network data
(debugging) will take place.
ΓòÉΓòÉΓòÉ <hidden> options ΓòÉΓòÉΓòÉ
Specifies that Telneto will show options processing (debugging).
ΓòÉΓòÉΓòÉ <hidden> outbinary ΓòÉΓòÉΓòÉ
Specifies that data is sent in binary.
ΓòÉΓòÉΓòÉ <hidden> over ΓòÉΓòÉΓòÉ
Defines the character for entering character replace mode.
ΓòÉΓòÉΓòÉ <hidden> prettydump ΓòÉΓòÉΓòÉ
Specifies that Telneto will print readable output for "netdata" (debugging).
ΓòÉΓòÉΓòÉ <hidden> quit ΓòÉΓòÉΓòÉ
Defines a sequence break character (sends brk).
ΓòÉΓòÉΓòÉ <hidden> reprint ΓòÉΓòÉΓòÉ
Specifies the character to be taken as the terminal's reprint character.
ΓòÉΓòÉΓòÉ <hidden> rlogin ΓòÉΓòÉΓòÉ
Specifies the rlogin escape character. If set, the Telnet escape character is
ignored unless it is preceded by this character. This character, followed by a
period (.) at the beginning of the line, closes the connection. When followed
by a ^Z, it suspends the telneto command. The initial setting is to have the
rlogin escape character disabled.
ΓòÉΓòÉΓòÉ <hidden> skiprc ΓòÉΓòÉΓòÉ
Specifies that Telneto should not read the TELNET.RC file.
ΓòÉΓòÉΓòÉ <hidden> start ΓòÉΓòÉΓòÉ
Specifies the character to be used as the terminal's start character if the
Telnet toggle-flow-control option has been enabled. If you do not specify this
key sequence, the start sequence is ^S.
ΓòÉΓòÉΓòÉ <hidden> stop ΓòÉΓòÉΓòÉ
Specifies the character to be used as the terminal's stop character if the
Telnet toggle-flow-control option has been enabled. If you do not specify this
key sequence, the stop sequence is ^Q.
ΓòÉΓòÉΓòÉ <hidden> susp ΓòÉΓòÉΓòÉ
Sets the key sequence to send a Telnet susp (suspend process) sequence to the
remote host if Telneto is in localchars mode, or LINEMODE is enabled, and the
suspend character is typed.
ΓòÉΓòÉΓòÉ <hidden> tracefile ΓòÉΓòÉΓòÉ
Specifies the file to which the output, caused by netdata, termdata, or option
tracing being true, is written. If you do not specify this key sequence, the
start sequence is - and tracing information is written to standard output.
ΓòÉΓòÉΓòÉ <hidden> worderase ΓòÉΓòÉΓòÉ
Specifies the character to be used as the terminal's word erase character.
ΓòÉΓòÉΓòÉ <hidden> value ΓòÉΓòÉΓòÉ
Specifies the key sequence to use for the Telneto instruction.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the set subcommand.
ΓòÉΓòÉΓòÉ <hidden> slc Subcommand ΓòÉΓòÉΓòÉ
The slc subcommand sets or changes the state of the special characters.
ΓöÇΓöÇslcΓöÇΓöÇΓö¼ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇexportΓöÇΓöñ
Γö£ΓöÇimportΓöÇΓöñ
ΓööΓöÇcheckΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the slc subcommand.
ΓòÉΓòÉΓòÉ <hidden> export ΓòÉΓòÉΓòÉ
Switches to the local defaults for the special characters. The local default
characters are those of the local terminal at the time when Telnet is started.
ΓòÉΓòÉΓòÉ <hidden> import ΓòÉΓòÉΓòÉ
Switches to the remote defaults for the special characters. The remote default
characters are those of the remote system at the time when the Telnet
connection is established.
ΓòÉΓòÉΓòÉ <hidden> check ΓòÉΓòÉΓòÉ
Verifies the current settings for the current special characters. The remote
host is asked to send all the current special character settings, and if there
are any discrepancies with the local host, the local host switches to the
remote value.
ΓòÉΓòÉΓòÉ <hidden> status Subcommand ΓòÉΓòÉΓòÉ
The status subcommand displays the current status of the Telnet connection or
operating mode.
ΓöÇΓöÇstatusΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> toggle Subcommand ΓòÉΓòÉΓòÉ
The toggle subcommand toggles the operating parameters.
ΓöÇΓöÇtoggleΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇautoflushΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇautosynchΓöÇΓöÇΓöñ
Γö£ΓöÇbinaryΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇbsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇdebugΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinbinaryΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇoutbinaryΓöÇΓöÇΓöñ
Γö£ΓöÇcrlfΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇcrmodΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇlocalcharsΓöÇΓöñ
Γö£ΓöÇnetdataΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇoptionsΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇprettydumpΓöÇΓöñ
ΓööΓöÇskiprcΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying toggle Help
ΓöÇΓöÇtoggleΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the toggle subcommand.
ΓòÉΓòÉΓòÉ <hidden> autoflush ΓòÉΓòÉΓòÉ
If autoflush and localchars are both true, when the ao (abort output) or quit
characters are recognized and transformed into Telnet sequences, Telneto will
not display any data on the user's workstation until the remote system
acknowledges that it has processed those Telnet sequences. The initial setting
is true.
ΓòÉΓòÉΓòÉ <hidden> autosynch ΓòÉΓòÉΓòÉ
If autosynch and localchars are both true when either the intr or quit
characters are typed, the resulting Telnet sequence sent is followed by the
Telnet synch sequence. This procedure causes the remote system to begin
discarding all previously typed input until both of the Telnet sequences are
read and acted upon. The initial setting is false.
ΓòÉΓòÉΓòÉ <hidden> binary ΓòÉΓòÉΓòÉ
Enables or disables theTelnet binary option on both input and output.
ΓòÉΓòÉΓòÉ <hidden> bs ΓòÉΓòÉΓòÉ
Changes the backspace key from ASCII backspace to ASCII delete.
ΓòÉΓòÉΓòÉ <hidden> debug ΓòÉΓòÉΓòÉ
Enables or disables debugging.
ΓòÉΓòÉΓòÉ <hidden> inbinary ΓòÉΓòÉΓòÉ
Enables or disables the Telnet binary option on input.
ΓòÉΓòÉΓòÉ <hidden> outbinary ΓòÉΓòÉΓòÉ
Enables or disables the Telnet binary option on output.
ΓòÉΓòÉΓòÉ <hidden> crlf ΓòÉΓòÉΓòÉ
If this is true, carriage returns (CR) are sent as carriage return line feed
(CRLF). If this is false, carriage returns are sent as carriage return null
(CRNUL). The initial setting is false.
ΓòÉΓòÉΓòÉ <hidden> crmod ΓòÉΓòÉΓòÉ
Toggles carriage return mode. When this mode is enabled, carriage return
characters received from the remote host are mapped into a carriage return
followed by a line feed. This mode affects only those characters received from
the remote host. Use this mode when the remote host sends only carriage return,
never line feed. The initial setting is false.
ΓòÉΓòÉΓòÉ <hidden> localchars ΓòÉΓòÉΓòÉ
If this is true, the flush, interrupt, quit, erase, and kill characters are
recognized locally and transformed into appropriate Telnet control sequences.
When the linemode option is enabled, the value of localchars is ignored and
assumed to be true. If linemode has been enabled, quit is sent as ends
abnormally, and eof and susp are sent as eof and susp.
ΓòÉΓòÉΓòÉ <hidden> netdata ΓòÉΓòÉΓòÉ
Toggles the display of all network data in hexadecimal format. The initial
setting is false.
ΓòÉΓòÉΓòÉ <hidden> options ΓòÉΓòÉΓòÉ
Toggles the display of some internal Telnet protocol processing. The initial
setting is false.
ΓòÉΓòÉΓòÉ <hidden> prettydump ΓòÉΓòÉΓòÉ
When the netdata or termdata toggle options are on, prettydump is true. The
output from the netdata and termdata options is formatted in a readable format.
Spaces are put between the characters in the output, and the beginning of any
Telnet escape sequence is preceded by an asterisk (*) to aid in locating it.
ΓòÉΓòÉΓòÉ <hidden> skiprc ΓòÉΓòÉΓòÉ
When the skiprc toggle is false, Telneto skips the reading of the TELNET.RC
file in the ETC directory when connections are opened. The initial setting is
false.
ΓòÉΓòÉΓòÉ <hidden> termdata ΓòÉΓòÉΓòÉ
Toggles the display of all terminal data in hexadecimal format. The initial
setting is false.
ΓòÉΓòÉΓòÉ <hidden> unset Subcommand ΓòÉΓòÉΓòÉ
The unset subcommand disables or sets the Telnet variables to false.
ΓöÇΓöÇunsetΓöÇΓöÇΓö¼ΓöÇautoflushΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇautosynchΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇaytΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇbinaryΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇbsΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇcrlfΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇcrmodΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇdebugΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇebolΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇechoΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇecrΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeeolΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeofΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇeraseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇescapeΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇewrΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇewlΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇflushoutputΓöÇΓöñ
Γö£ΓöÇforw1ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇforw2ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinbinaryΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinsrtΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇinterruptΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇkillΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇlnextΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇlocalcharsΓöÇΓöÇΓöñ
Γö£ΓöÇmcbolΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmceolΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmclΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcrΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcwlΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇmcwrΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇnetdataΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇoptionsΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇoutbinaryΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇoverΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇprettydumpΓöÇΓöÇΓöñ
Γö£ΓöÇquitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇreprintΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇrloginΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇskiprcΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇstartΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇstopΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇsuspΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇtracefileΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇworderaseΓöÇΓöÇΓöÇΓöÿ
Displaying set Help
ΓöÇΓöÇunsetΓöÇΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> autoflush ΓòÉΓòÉΓòÉ
Specifies that no deleting of output occurs when sending interrupt characters.
ΓòÉΓòÉΓòÉ <hidden> autosynch ΓòÉΓòÉΓòÉ
Specifies no automatic sending of interrupt characters in urgent mode.
ΓòÉΓòÉΓòÉ <hidden> ayt ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to send a Telnet ayt.
ΓòÉΓòÉΓòÉ <hidden> binary ΓòÉΓòÉΓòÉ
Specifies that the sending and receiving of data is no longer binary.
ΓòÉΓòÉΓòÉ <hidden> bs ΓòÉΓòÉΓòÉ
Changes the backspace key from an ASCII delete to an ASCII backspace.
ΓòÉΓòÉΓòÉ <hidden> crlf ΓòÉΓòÉΓòÉ
Specifies that carriage returns are sent as <CR>.
ΓòÉΓòÉΓòÉ <hidden> crmod ΓòÉΓòÉΓòÉ
Ends the mapping of received carriage returns.
ΓòÉΓòÉΓòÉ <hidden> debug ΓòÉΓòÉΓòÉ
Ends debugging.
ΓòÉΓòÉΓòÉ <hidden> ebol ΓòÉΓòÉΓòÉ
Cancels the character defined as the erase-to-beginning-of-line character.
ΓòÉΓòÉΓòÉ <hidden> echo ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to toggle between local echoing of entered
characters (for normal processing) and suppressing echoing of entered
characters (for example, a password) when in line mode.
ΓòÉΓòÉΓòÉ <hidden> ecr ΓòÉΓòÉΓòÉ
Cancels the character defined for deleting a character to the right.
ΓòÉΓòÉΓòÉ <hidden> eeol ΓòÉΓòÉΓòÉ
Cancels the character defined for deleting to end of the line.
ΓòÉΓòÉΓòÉ <hidden> eof ΓòÉΓòÉΓòÉ
Resets the eof sequence to ^Z.
ΓòÉΓòÉΓòÉ <hidden> erase ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to cause an erase character to be sent.
ΓòÉΓòÉΓòÉ <hidden> escape ΓòÉΓòÉΓòÉ
Cancels the character defined as the escape character.
ΓòÉΓòÉΓòÉ <hidden> ewr ΓòÉΓòÉΓòÉ
Cancels the character defined for deleting a character to the left.
ΓòÉΓòÉΓòÉ <hidden> ewl ΓòÉΓòÉΓòÉ
Cancels the character defined for deleting a word to the left.
ΓòÉΓòÉΓòÉ <hidden> flushoutput ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to send a Telnet ao (abort output) sequence
to the remote host, if Telnet is in localchars mode.
ΓòÉΓòÉΓòÉ <hidden> forw1, forw2 ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to forward partial lines to the remote system.
ΓòÉΓòÉΓòÉ <hidden> inbinary ΓòÉΓòÉΓòÉ
Specifies that data being received is no longer binary.
ΓòÉΓòÉΓòÉ <hidden> insrt ΓòÉΓòÉΓòÉ
Cancels the character defined for entering insert mode.
ΓòÉΓòÉΓòÉ <hidden> interrupt ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to send a interrupt character.
ΓòÉΓòÉΓòÉ <hidden> kill ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to erase a line.
ΓòÉΓòÉΓòÉ <hidden> lnext ΓòÉΓòÉΓòÉ
Cancels the character defined as the terminal's next character.
ΓòÉΓòÉΓòÉ <hidden> localchars ΓòÉΓòÉΓòÉ
Ends the local recognition of certain control characters.
ΓòÉΓòÉΓòÉ <hidden> mcbol ΓòÉΓòÉΓòÉ
Cancels the character defined for moving the cursor to the beginning of the
line.
ΓòÉΓòÉΓòÉ <hidden> mceol ΓòÉΓòÉΓòÉ
Cancels the character defined for moving the cursor to the end of the line.
ΓòÉΓòÉΓòÉ <hidden> mcl ΓòÉΓòÉΓòÉ
Cancels the character defined for moving the cursor to the left one character.
ΓòÉΓòÉΓòÉ <hidden> mcr ΓòÉΓòÉΓòÉ
Cancels the character defined for moving the cursor to the right one character.
ΓòÉΓòÉΓòÉ <hidden> mcwl ΓòÉΓòÉΓòÉ
Cancels the character defined for moving the cursor to the left one word.
ΓòÉΓòÉΓòÉ <hidden> mcwr ΓòÉΓòÉΓòÉ
Cancels the character defined for moving the cursor to the right one word.
ΓòÉΓòÉΓòÉ <hidden> netdata ΓòÉΓòÉΓòÉ
Specifies that printing of hexadecimal representation of network data
(debugging) will take place.
ΓòÉΓòÉΓòÉ <hidden> options ΓòÉΓòÉΓòÉ
Specifies that Telneto will no longer show options processing (debugging).
ΓòÉΓòÉΓòÉ <hidden> outbinary ΓòÉΓòÉΓòÉ
Specifies that data is no longer sent in binary.
ΓòÉΓòÉΓòÉ <hidden> over ΓòÉΓòÉΓòÉ
Cancels the key sequence defined for entering character replace mode.
ΓòÉΓòÉΓòÉ <hidden> prettydump ΓòÉΓòÉΓòÉ
Specifies that Telneto will not print readable output for "netdata"
(debugging).
ΓòÉΓòÉΓòÉ <hidden> quit ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to set a break character.
ΓòÉΓòÉΓòÉ <hidden> reprint ΓòÉΓòÉΓòÉ
Cancels the character defined as the terminal's reprint character.
ΓòÉΓòÉΓòÉ <hidden> rlogin ΓòÉΓòÉΓòÉ
Cancels the character defined rlogin escape character.
ΓòÉΓòÉΓòÉ <hidden> skiprc ΓòÉΓòÉΓòÉ
Specifies that Telneto should read the TELNET.RC file.
ΓòÉΓòÉΓòÉ <hidden> start ΓòÉΓòÉΓòÉ
Cancels the character defined as the terminal's start character if the Telnet
toggle-flow-control option has been enabled.
ΓòÉΓòÉΓòÉ <hidden> stop ΓòÉΓòÉΓòÉ
Cancels the character defined as the terminal's stop character if the Telnet
toggle-flow-control option has been enabled.
ΓòÉΓòÉΓòÉ <hidden> susp ΓòÉΓòÉΓòÉ
Cancels the key sequence defined to send a Telnet susp (suspend process)
sequence to the remote host if Telneto is in localchars mode, or LINEMODE is
enabled, and the suspend character is typed.
ΓòÉΓòÉΓòÉ <hidden> tracefile ΓòÉΓòÉΓòÉ
Specifies that the output caused by netdata, termdata, or option tracing is
written to standard output.
ΓòÉΓòÉΓòÉ <hidden> worderase ΓòÉΓòÉΓòÉ
Cancels the character defined as the terminal's word erase character.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
Displays help information for the unset subcommand.
ΓòÉΓòÉΓòÉ <hidden> ? Subcommand ΓòÉΓòÉΓòÉ
The ? subcommand displays help information for the Telneto command shell. Using
the ? subcommand is the same as issuing the help subcommand.
ΓöÇΓöÇ?ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 78. telnetpm Command ΓòÉΓòÉΓòÉ
The telnetpm command logs you on to a remote host emulating one of the
following terminal types:
ANSI
VT220
VT100
NVT
HFT
TelnetPM provides the same function as Telnet, but in a Presentation Manager
window. Telnet is faster than TelnetPM, but TelnetPM is easier to use.
If you do not specify a host, TelnetPM opens a window prompting you to specify
one by either name, address, or alias, and, optionally, the port. There is no
TelnetPM command shell. The functions of the Telnet shell can be performed
using the menu bar of the TelnetPM Presentation Manager window.
ΓöÇΓöÇtelnetpmΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇd filenameΓöÇΓöÿ ΓööΓöÇ ΓöÇl filenameΓöÇΓöÿ
ΓöîΓöÇ -c TCPCODEPΓöÇΓöÉ ΓöîΓöÇ -k 1ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇc codepageΓöÇΓöÿ ΓööΓöÇ ΓöÇf configfileΓöÇΓöÿ ΓööΓöÇ ΓöÇk keyboardΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇh heightΓöÇΓöÿ ΓööΓöÇ ΓöÇw widthΓöÇΓöÿ ΓööΓöÇ ΓöÇo printer_portΓöÇΓöÿ
ΓöîΓöÇ;ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö┤ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇe environmentΓöÇΓöÿ ΓööΓöÇ ΓöÇt termtypeΓöÇΓöÿ ΓööΓöÇ ΓöÇp portΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostnameΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -d filename ΓòÉΓòÉΓòÉ
Sets debugging on and specifies the fully-qualified file name to be used during
debugging. This parameter is useful when diagnosing problems.
ΓòÉΓòÉΓòÉ <hidden> -l filename ΓòÉΓòÉΓòÉ
Sets logging on and specifies the fully-qualified file name to be used during
logging. When logging is on and you specify a logfile, a log is kept of the
Telnet session.
ΓòÉΓòÉΓòÉ <hidden> -f configfile ΓòÉΓòÉΓòÉ
Specifies the name of a configuration file in the TCPIP\ETC subdirectory to use
for establishing initial toggle values and customized keyboard mapping. Specify
the configfile with the file name only; do not specify the path or extension.
You can create or change the configfile by using the setterm command.
ΓòÉΓòÉΓòÉ <hidden> -c codepage ΓòÉΓòÉΓòÉ
Specifies the ASCII codepage used by the remote host. The default is TCPCODEP,
which uses the DEC Multinational codepage. Other possible pages are TCP8859 for
ISO 8859 codepage, or NONE for PC codepage 850.
ΓòÉΓòÉΓòÉ <hidden> -k keyboard ΓòÉΓòÉΓòÉ
Specifies emulation of a VT220 national keyboard. Valid values are:
1 North American (the default)
2 British
3 Flemish
4 French Canadian
5 Danish
6 Finnish
7 German
8 Dutch
9 Italian
10 Swiss (French)
11 Swiss (German)
12 Swedish
13 Norwegian
14 French/Belgian
15 Spanish
ΓòÉΓòÉΓòÉ <hidden> -h height ΓòÉΓòÉΓòÉ
Specifies the number of rows displayed on the host screen.
For VGA or BGA screens, the valid display combinations by height and width are:
25x80
43x80
50x80
TelnetPM attempts to negotiate the specified width and height with the host. If
those parameters are not accepted by the host, Telnet will use the default
screen size which is 24x80 for VT100 and VT220 and 25x80 for ANSI and NVT.
ΓòÉΓòÉΓòÉ <hidden> -w width ΓòÉΓòÉΓòÉ
Specifies the number of columns displayed on the host screen.
The valid display combinations by height and width are:
25x80
43x80
50x80
TelnetPM attempts to negotiate the specified width and height with the host. If
those parameters are not accepted by the host, Telnet will use the default
screen size which is 24x80 for VT100 and VT220 and 25x80 for ANSI and NVT.
ΓòÉΓòÉΓòÉ <hidden> -o printer_port ΓòÉΓòÉΓòÉ
Specifies a supported local printer port name. The supported printer port names
are PRN, LPT1, LPT2, and LPT3. PRN is the default printer port name.
ΓòÉΓòÉΓòÉ <hidden> -e environment ΓòÉΓòÉΓòÉ
Specifies a list of environment variables and values to be exported to the
host. Specify the environment string using the following format:
name=value;name=value;name=value ...
Do not put any spaces between the entries.
ΓòÉΓòÉΓòÉ <hidden> -t termtype ΓòÉΓòÉΓòÉ
Specifies a terminal type to emulate in communicating with the remote host.
The following terminal types are supported:
VT220
VT100
ANSI
NVT
If you do not specify a terminal type, Telnet will try to negotiate the
terminal type with the remote host. The negotiation order is as previously
shown.
ΓòÉΓòÉΓòÉ <hidden> -p port ΓòÉΓòÉΓòÉ
Specifies a port number (the address of an application) or a name. If a port is
not specified, the default Telnet port is used. Port names are mapped to port
numbers by the services file.
ΓòÉΓòÉΓòÉ <hidden> hostname ΓòÉΓòÉΓòÉ
Specifies the name, alias, or internet address of a remote host.
ΓòÉΓòÉΓòÉ 79. tftp Command ΓòÉΓòÉΓòÉ
The tftp command is a file transfer protocol that transfers one file at a time
and does not provide user authentication.
ΓöÇΓöÇtftpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇportΓöÇΓöÿ
Subcommands
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
The host to which you are connecting. The tftp command immediately tries to
establish a connection to this host.
ΓòÉΓòÉΓòÉ <hidden> port ΓòÉΓòÉΓòÉ
The destination port to which you are connecting. If port is not specified, you
are connected by default to the well-known TFTP port as specified in the
services file.
ΓòÉΓòÉΓòÉ <hidden> TFTP Subcommands ΓòÉΓòÉΓòÉ
The following subcommands can be used in the TFTP command shell.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöéascii Γöébinary Γöéconnect Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéget Γöémode Γöéput Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöéquit Γöérexmt Γöéstatus Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöétimeout Γöétrace Γöéverbose Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé? Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> ascii Subcommand ΓòÉΓòÉΓòÉ
The ascii subcommand sets the file transfer type to ASCII. You can issue the
ascii subcommand with the abbreviation a.
ΓöÇΓöÇasciiΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> binary Subcommand ΓòÉΓòÉΓòÉ
The binary subcommand sets the file transfer type to binary. The binary file
transfer type is useful for image transfers, such as executable files. You can
issue the binary subcommand with the abbreviation b.
ΓöÇΓöÇbinaryΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> connect Subcommand ΓòÉΓòÉΓòÉ
The connect subcommand establishes a connection to a specified remote host. You
can issue the connect subcommand with the abbreviation c.
ΓöÇΓöÇconnectΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇportΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
The remote host to which you want to connect.
ΓòÉΓòÉΓòÉ <hidden> port. ΓòÉΓòÉΓòÉ
The destination port to which you are connecting. If port is not specified, you
are connected by default to the well-known TFTP port as specified in the
services file.
ΓòÉΓòÉΓòÉ <hidden> get Subcommand ΓòÉΓòÉΓòÉ
The get subcommand transfers a file from a remote host to your workstation. You
can issue the get subcommand with the abbreviation g.
ΓöÇΓöÇgetΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇremote_fileΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇlocal_fileΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> remote_file ΓòÉΓòÉΓòÉ
The name of the file, on the remote host, that is transferred to your
workstation.
ΓòÉΓòÉΓòÉ <hidden> local_file ΓòÉΓòÉΓòÉ
The name of the file created on your workstation in which to store a copy of
remote_file.
ΓòÉΓòÉΓòÉ <hidden> mode Subcommand ΓòÉΓòÉΓòÉ
The mode subcommand sets the file transfer mode. You can issue the mode
subcommand with the abbreviation m.
ΓöÇΓöÇmodeΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇasciiΓöÇΓöÇΓöñ
ΓööΓöÇbinaryΓöÇΓöÿ
The setting that you specify will remain in effect until you either change it
or quit TFTP. If you specify mode without a parameter, TFTP will display a
message indicating the current transfer type.
ΓòÉΓòÉΓòÉ <hidden> ascii ΓòÉΓòÉΓòÉ
Specifies the file transfer mode as ASCII. This is the default file transfer
mode and is used to transfer files that contain text characters. Specifying the
ascii parameter with the mode subcommand is the same as issuing the ascii
subcommand.
Note: The term netascii is synonymous with ascii.
ΓòÉΓòÉΓòÉ <hidden> binary ΓòÉΓòÉΓòÉ
Sets the file transfer mode as binary (image). Specifying the binary parameter
with the mode subcommand is the same as issuing the binary subcommand.
Note: The terms image and octet are synonymous binary.
ΓòÉΓòÉΓòÉ <hidden> put Subcommand ΓòÉΓòÉΓòÉ
The put subcommand transfers a file from your workstation to a remote host. You
can issue the put subcommand with the abbreviation p.
ΓöÇΓöÇputΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇlocal_fileΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇremote_fileΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> local_file ΓòÉΓòÉΓòÉ
The name of the file on your workstation that is transferred to the remote
host.
ΓòÉΓòÉΓòÉ <hidden> remote_file ΓòÉΓòÉΓòÉ
The name of the local_file when the file is stored on the remote host.
ΓòÉΓòÉΓòÉ <hidden> quit Subcommand ΓòÉΓòÉΓòÉ
The quit subcommand ends the TFTP session and exits the TFTP command shell. You
can issue the quit subcommand with the abbreviation q.
ΓöÇΓöÇquitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> rexmt Subcommand ΓòÉΓòÉΓòÉ
The rexmt subcommand sets the packet retransmission timeout. You can issue the
rexmt subcommand with the abbreviation r.
ΓöÇΓöÇrexmtΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> n ΓòÉΓòÉΓòÉ
The maximum number of seconds that TFTP tries to retransmit one packet. If you
do not specify this value, TFTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> status Subcommand ΓòÉΓòÉΓòÉ
The status subcommand displays the current status of the TFTP connection. You
can issue the status subcommand with the abbreviation s.
ΓöÇΓöÇstatusΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> timeout Subcommand ΓòÉΓòÉΓòÉ
The timeout subcommand specifies the total retransmission time. You can issue
the timeout subcommand with the abbreviation ti.
ΓöÇΓöÇtimeoutΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇnΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> n ΓòÉΓòÉΓòÉ
Specifies the maximum number of seconds that TFTP tries to retransmit the file.
If you do not specify this value, TFTP will prompt you for it.
ΓòÉΓòÉΓòÉ <hidden> trace Subcommand ΓòÉΓòÉΓòÉ
The trace subcommand toggles the flag that determines whether transmitted
packets are traced. The initial setting is off. You can issue the trace
subcommand with the abbreviation tr.
ΓöÇΓöÇtraceΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> verbose Subcommand ΓòÉΓòÉΓòÉ
The verbose subcommand toggles the flag that determines whether information
about the file transfer should be displayed. The initial setting is off. You
can issue the verbose subcommand with the abbreviation v.
ΓöÇΓöÇverboseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> ? Subcommand ΓòÉΓòÉΓòÉ
The ? subcommand displays help information for the TFTP command shell.
ΓöÇΓöÇ?ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇsubcommandΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> subcommand ΓòÉΓòÉΓòÉ
The subcommand for which you are requesting help. You must enter the subcommand
in lowercase.
ΓòÉΓòÉΓòÉ 80. tftpd Command ΓòÉΓòÉΓòÉ
The tftpd command starts the trivial file transfer protocol (TFTP) server on
your local host.
ΓöÇΓöÇtftpdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇpathΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> path ΓòÉΓòÉΓòÉ
The path for which you are granting access to the TFTP client. The path is used
as a prefix for all file names specified by the put and get subcommands of
TFTP.
ΓòÉΓòÉΓòÉ 81. tn3270 Command ΓòÉΓòÉΓòÉ
The tn3270 command is a Telnet client that is used to log on to a programmable
workstation running a Telnet server that supports 3270 data streams.
ΓöÇΓöÇtn3270ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇbΓöÇΓöÿ ΓööΓöÇ ΓöÇextΓöÇΓöÿ ΓööΓöÇ ΓöÇnbΓöÇΓöÿ ΓööΓöÇ ΓöÇhΓöÇΓöÿ ΓööΓöÇ ΓöÇoΓöÇΓöÿ
ΓöîΓöÇ ΓöÇp 23ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇhostnameΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇtx filenameΓöÇΓöÿ ΓööΓöÇ ΓöÇp port_numberΓöÇΓöÿ ΓööΓöÇ ΓöÇbcΓöÇΓöÿ
Displaying tn3270 Help
ΓöÇtn3270ΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays the help information for tn3270.
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Displays brackets and backslash characters as they appear on a keyboard.
ΓòÉΓòÉΓòÉ <hidden> -ext ΓòÉΓòÉΓòÉ
Enables extended data stream support.
ΓòÉΓòÉΓòÉ <hidden> -nb ΓòÉΓòÉΓòÉ
Suppresses the bell.
ΓòÉΓòÉΓòÉ <hidden> -h ΓòÉΓòÉΓòÉ
Uses boxes for characters in hidden fields.
ΓòÉΓòÉΓòÉ <hidden> -o ΓòÉΓòÉΓòÉ
Uses old style keyboard (for example, Shift + F1 = PF13).
ΓòÉΓòÉΓòÉ <hidden> hostname ΓòÉΓòÉΓòÉ
Specifies the host to which you are connecting.
ΓòÉΓòÉΓòÉ <hidden> -tx filename ΓòÉΓòÉΓòÉ
Reads the specified translation table. If the file name you specified does not
contain the full path, TN3270 searches the TCPIP\ETC directory for the file.
If you do not specify -tx, TN3270 uses the translation file 3278XLT.TBL in the
TCPIP\ETC directory. If this file does not exist in the TCPIP\ETC directory,
TN3270 uses the default US translate table provided with the application.
ΓòÉΓòÉΓòÉ <hidden> -p port_number ΓòÉΓòÉΓòÉ
Specifies the port number to be used. The default port is 23. Port 1023 is
recommended if you are using servers that send ASCII prior to switching to
transparent mode.
ΓòÉΓòÉΓòÉ <hidden> -bc ΓòÉΓòÉΓòÉ
Specifies a block cursor.
ΓòÉΓòÉΓòÉ <hidden> -t ΓòÉΓòÉΓòÉ
Generates a TN3270.LOG file containing debug terminal negotiation information.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Generates a TN3270.LOG file containing debug information about all data send.
ΓòÉΓòÉΓòÉ <hidden> -t -d ΓòÉΓòÉΓòÉ
Generates a TN3270.LOG file containing information for both terminal
negotiation and all data sent.
ΓòÉΓòÉΓòÉ 82. tn3270 Keyboard Mapping ΓòÉΓòÉΓòÉ
The default keyboard definitions are:
WORKSTATION KEY FUNCTION
Newline Enter
Escape Clear
PgUp PF7
PgDn PF8
Shift-Tab BackTab
Shift-F1 through Shift-F12 PF13-PF24
Shift-PgUp PF7
Shift-PgDn PF8
Control-End Erase EOF
Control-Left Backward Word
Control-Right Forward Word
Control-Delete Delete Word
Control-'e' End
Control-'p' Up
Control-'a' Home
Control-'d' Delete
Control-'f' Right
Control-'c' Clear
Control-'b' Left
Control-'n' Down
Control-']' Menu
Alt-'1' PA1
Alt-'2' PA2
Alt-'3' PA3
Alt-'R' Reset
Alt-'m' Menu
ΓòÉΓòÉΓòÉ 83. tn5250 Command ΓòÉΓòÉΓòÉ
The tn5250 command is a Telnet client that is used to log on to a programmable
workstation running a Telnet server that supports 5250 data streams.
ΓöÇΓöÇtn5250ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇbΓöÇΓöÿ ΓööΓöÇ ΓöÇbcΓöÇΓöÿ ΓööΓöÇ ΓöÇdΓöÇΓöÿ ΓööΓöÇ hostΓöÇΓöÿ ΓööΓöÇ ΓöÇnbΓöÇΓöÿ
ΓöîΓöÇ ΓöÇp 23ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼
ΓööΓöÇ ΓöÇncbΓöÇΓöÿ ΓööΓöÇ ΓöÇp port_numberΓöÇΓöÿ ΓööΓöÇ ΓöÇt textΓöÇΓöÿ ΓööΓöÇ -tx filenameΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇwideΓöÇΓöÿ
Displaying tn5250 help
ΓöÇΓöÇtn5250ΓöÇΓöÇ ΓöÇ?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: On screens with many extended attributes, the screen is painted without
extended attributes before the extended attributes can be painted.
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Changes the output translation table for code points X'AD' and X'BD' to display
them as square brackets. On a 3179 terminal with the text feature, the square
brackets are at code points X'BA' and X'BB'. However, many programs display the
brackets using X'AD' and X'BD', because that is the EBCDIC definition.
ΓòÉΓòÉΓòÉ <hidden> -bc ΓòÉΓòÉΓòÉ
Specifies a block cursor.
ΓòÉΓòÉΓòÉ <hidden> -d ΓòÉΓòÉΓòÉ
Generates a TN5250.LOG file containing debug information for terminal
negotiation and all data sent to and received from the server.
ΓòÉΓòÉΓòÉ <hidden> host ΓòÉΓòÉΓòÉ
Specifies the host to which you are connecting. TN5250 immediately tries to
establish a connection to the remote host. If you do not specify a host, TN5250
displays a window that prompts you to enter the host.
ΓòÉΓòÉΓòÉ <hidden> -nb ΓòÉΓòÉΓòÉ
Suppresses the bell.
ΓòÉΓòÉΓòÉ <hidden> -ncb ΓòÉΓòÉΓòÉ
Specfies a nonblinking cursor.
Note: Even if you specify -ncb, the cursor will still blink on screens where
there is a blinking field.
ΓòÉΓòÉΓòÉ <hidden> -p port_number ΓòÉΓòÉΓòÉ
Specifies the port number to be used. The default port is 23. Port 1023 is
recommended if you are using servers that send ASCII prior to switching to
transparent mode.
ΓòÉΓòÉΓòÉ <hidden> -t text ΓòÉΓòÉΓòÉ
Specifies text to be displayed in the title bar and task list. When -t text is
not used, TN5250 displays the specified host in the title bar and task list.
When -t is used, the text specified precedes the host. For example, if you
issue the following tn5250 command:
tn5250 host1 -t sometext
then
sometext: host1
is displayed in the title bar and task list. No spaces are allowed in the text.
ΓòÉΓòÉΓòÉ <hidden> -tx filename ΓòÉΓòÉΓòÉ
Reads the specified translation table. If the file name you specified does not
contain the full path, TN5250 searchs the TCPIP\ETC directory for the file.
If you do not specify -tx, TN5250 uses the translation file 5250XLT.TBL in the
TCPIP\ETC directory. If this file does not exist in the TCPIP\ETC directory,
TN5250 uses the default US translate table provided with the application.
ΓòÉΓòÉΓòÉ <hidden> -wide ΓòÉΓòÉΓòÉ
The 5250 architecture provides for a terminal having two screen sizes: the
default and the alternate. TN5250 defines the default screen size to be 24x80
and the alternate to be 27x132. The alternate screen size is enabled by the
-wide start up parameter. Most AS/400 programs can use the 24x80 screen size.
The larger screen size is used to display spool files and some documents.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays help information.
ΓòÉΓòÉΓòÉ 84. tr2snif Command ΓòÉΓòÉΓòÉ
The tr2snif command converts the IPTRACE.DMP file to a format that can be
viewed on a network monitor trace workstation. This file will not contain any
time information. Start tr2snif from the same directory where the IPTRACE.DMP
file resides.
ΓöÇΓöÇtr2snifΓöÇΓöÇΓö¼ΓöÇeΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇtΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> e ΓòÉΓòÉΓòÉ
Specifies Ethernet output.
ΓòÉΓòÉΓòÉ <hidden> t ΓòÉΓòÉΓòÉ
Specifies Token-Ring output.
ΓòÉΓòÉΓòÉ 85. umount Command ΓòÉΓòÉΓòÉ
The umount command is an NFS command that is used to unmount previously mounted
NFS drives.
ΓöÇΓöÇumountΓöÇΓöÇdrive_letterΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Displaying umount Help
ΓöÇΓöÇumountΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> drive_letter ΓòÉΓòÉΓòÉ
Specifies the letter of the drive to be detached from the local file system.
If you specify (*) as drive_letter value, all NFS mounted drives are detached
from the file system. The results are the same as when you issue the nfsclean
command.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 86. unix2os2 Command ΓòÉΓòÉΓòÉ
The unix2os2 command converts ASCII files from UNIX format to OS/2 format. This
command converts UNIX line feeds (LF) to OS/2 carriage return line feed pairs
(CR, LF). No other conversions are performed.
ΓöÇΓöÇunix2os2ΓöÇΓöÇ<infileΓöÇΓöÇ >outfileΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The os22unix command is implemented as a filter. Therefore, you must
include the < redirection symbol to sepcify the name of the input file and the
> redirection symbol to specify the name of the output file. If the
redirection symbols are not included, the filter expects its input to come from
the keyboard (the default input device) and will send its output to the display
(the default output device).
ΓòÉΓòÉΓòÉ <hidden> infile ΓòÉΓòÉΓòÉ
The file you want to convert.
ΓòÉΓòÉΓòÉ <hidden> outfile ΓòÉΓòÉΓòÉ
The file in which you receive the translated text.
ΓòÉΓòÉΓòÉ 87. xev Command ΓòÉΓòÉΓòÉ
The xev command allows you to display X Windows System events. The xev command
is useful for keystrokes and mouse events.
ΓöÇΓöÇxevΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdisplay ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇgeometry geomΓöÇΓöÿ ΓööΓöÇ ΓöÇbw pixelsΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöé ΓöîΓöÇnotusefulΓöÇΓöÇΓöÉ Γöé ΓööΓöÇ ΓöÇid windowidΓöÇΓöÿ ΓööΓöÇ ΓöÇsΓöÇΓöÿ
ΓööΓöÇ ΓöÇbsΓöÇΓöÇΓö╝ΓöÇwhenmappedΓöÇΓö╝ΓöÇΓöÿ
ΓööΓöÇalwaysΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇname stringΓöÇΓöÿ ΓööΓöÇ ΓöÇrvΓöÇΓöÿ
Note: The xev operands can be entered in any order.
Displaying xev Help
ΓöÇΓöÇxevΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Specifies the display, server, and screen to connect to. host is the host name
of the physical display, server specifies the server number, and screen
specifies the screen number. For example:
-display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either,
or both, the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed,
and the period is not needed.
ΓòÉΓòÉΓòÉ <hidden> -geometry geom ΓòÉΓòÉΓòÉ
Specifies the window size, window location, or both.
ΓòÉΓòÉΓòÉ <hidden> -bw pixels ΓòÉΓòÉΓòÉ
Specifies the border width for the window in pixels.
ΓòÉΓòÉΓòÉ <hidden> -bs notuseful, -bs whenmapped, -bs always ΓòÉΓòÉΓòÉ
Specifies the type of backing store to give the window. The default is
notuseful.
ΓòÉΓòÉΓòÉ <hidden> -id windowid ΓòÉΓòÉΓòÉ
Specifies that the window ID should be monitored, rather than creating a new
window.
ΓòÉΓòÉΓòÉ <hidden> -s ΓòÉΓòÉΓòÉ
Specifies that save-under should be enabled on the window.
ΓòÉΓòÉΓòÉ <hidden> -name string ΓòÉΓòÉΓòÉ
Specifies the name to assign to the created window.
ΓòÉΓòÉΓòÉ <hidden> -rv ΓòÉΓòÉΓòÉ
Specifies the window is displayed in reverse video.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 88. xfd Command ΓòÉΓòÉΓòÉ
The xfd command creates a window in which the characters of a font are
displayed.
ΓöÇΓöÇxfdΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ displayΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇgeometry geometryΓöÇΓöÿ ΓööΓöÇ ΓöÇbw nΓöÇΓöÿ ΓööΓöÇ ΓöÇrvΓöÇΓöÿ ΓööΓöÇ ΓöÇfwΓöÇΓöÿ
ΓöîΓöÇ -fg blackΓöÇΓöÉ ΓöîΓöÇ -bg whiteΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇfg colorΓöÇΓöÿ ΓööΓöÇ ΓöÇbg colorΓöÇΓöÿ ΓööΓöÇ ΓöÇbd colorΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇbf fontnameΓöÇΓöÿ ΓööΓöÇ ΓöÇtl titleΓöÇΓöÿ ΓööΓöÇ ΓöÇin iconnameΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇicon filenameΓöÇΓöÿ ΓööΓöÇ ΓöÇverboseΓöÇΓöÿ ΓööΓöÇ ΓöÇgrayΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇ ΓöÇfn fontnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇstart charnumΓöÇΓöÿ
Displaying xfd Help
ΓöÇΓöÇxfdΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The xfd operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Specifies the display, server, and screen to connect to. host is the host name
of the physical display, server specifies the server number, and screen
specifies the screen number. For example:
-display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either,
or both, the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed,
and the period is not needed.
ΓòÉΓòÉΓòÉ <hidden> -geometry geometry ΓòÉΓòÉΓòÉ
Specifies an initial window location and size.
ΓòÉΓòÉΓòÉ <hidden> -bw n ΓòÉΓòÉΓòÉ
Specifies the window border width in pixels.
ΓòÉΓòÉΓòÉ <hidden> -rv ΓòÉΓòÉΓòÉ
Switches the foreground and background colors.
ΓòÉΓòÉΓòÉ <hidden> -fw ΓòÉΓòÉΓòÉ
Overrides a previous choice to display a window in reverse video. The
foreground and background colors are not switched.
ΓòÉΓòÉΓòÉ <hidden> -fg color ΓòÉΓòÉΓòÉ
Specifies foreground color. The default is black.
ΓòÉΓòÉΓòÉ <hidden> -bg color ΓòÉΓòÉΓòÉ
Specifies the background color. The default is white.
ΓòÉΓòÉΓòÉ <hidden> -bd color ΓòÉΓòÉΓòÉ
Specifies the border color on color displays.
ΓòÉΓòÉΓòÉ <hidden> -bf fontname ΓòÉΓòÉΓòÉ
Specifies the font for messages at the bottom of the window.
ΓòÉΓòÉΓòÉ <hidden> -tl title ΓòÉΓòÉΓòÉ
Specifies the window title. If the title has blanks or special characters,
enclose the title within double quotation marks (" ").
ΓòÉΓòÉΓòÉ <hidden> -in iconname ΓòÉΓòÉΓòÉ
Specifies the title to display below the icon.
ΓòÉΓòÉΓòÉ <hidden> -icon filename ΓòÉΓòÉΓòÉ
Specifies that the bit map in the named file is used as the icon.
ΓòÉΓòÉΓòÉ <hidden> -verbose ΓòÉΓòÉΓòÉ
Specifies that extra font information be displayed.
ΓòÉΓòÉΓòÉ <hidden> -gray ΓòÉΓòÉΓòÉ
Specifies that the foreground and background colors are displayed on a gray
background.
ΓòÉΓòÉΓòÉ <hidden> -start charnum ΓòÉΓòÉΓòÉ
Specifies the number of the character that is the first character displayed.
ΓòÉΓòÉΓòÉ <hidden> -fn fontname ΓòÉΓòÉΓòÉ
Specifies the file name where the font exists.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ 89. xhost Command ΓòÉΓòÉΓòÉ
The xhost is used to dynamically add and delete hosts to the list of hosts that
are authorized to make connections to the X Window System server.
ΓöÇΓöÇxhostΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇhostnameΓöÇΓöñ
Γöé ΓööΓöÇ + ΓöÇΓöÿ Γöé
Γö£ΓöÇ ΓöÇ ΓöÇΓöÇhostnameΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇ + ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇ ΓöÇ ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Note: The xhost operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> + hostname ΓòÉΓòÉΓòÉ
Adds the specified host name to the list of hosts that are allowed to connect
to the X Window System server.
ΓòÉΓòÉΓòÉ <hidden> - hostname ΓòÉΓòÉΓòÉ
Removes the specified host name from the list of hosts that are allowed to
connect to the X Window System server. Existing connections are not broken, but
new connection attempts are denied.
ΓòÉΓòÉΓòÉ <hidden> + ΓòÉΓòÉΓòÉ
Grants access to all hosts, even if they are not on the list of allowed hosts.
Access control is turned off.
ΓòÉΓòÉΓòÉ <hidden> - ΓòÉΓòÉΓòÉ
Restricts access to only those hosts on the list of allowed hosts. Access
control is turned on.
ΓòÉΓòÉΓòÉ 90. xinit command ΓòÉΓòÉΓòÉ
The xinit command starts PMX and initializes the keyboard. The xinit command
accepts any PMX parameters.
ΓöîΓöÇ -lang en_USΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇxinitΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇlang language_codeΓöÇΓöÿ
ΓöîΓöÇ -unix AIX3.2ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇ ΓöÇunix user_defined_UNIX_typeΓöÇΓöñ
ΓööΓöÇ ΓöÇunix AIX3.1ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇclickclienttoraiseΓöÇΓöÿ ΓööΓöÇ ΓöÇclickframetoraiseΓöÇΓöÿ
ΓöîΓöÇ -co TCPIP\X11\RGB.TXTΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇco filenameΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇexplicitfocusΓöÇΓöÿ
ΓöîΓöÇ -fc cursorΓöÇΓöÇΓöÇΓöÉ ΓöîΓöÇ -fn fixedΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇfc fontnameΓöÇΓöÿ ΓööΓöÇ ΓöÇfn fontnameΓöÇΓöÿ
ΓöîΓöÇ -fp TCPIP\X11\MISC,TCPIP\X11\75DPI,TCPIP\X11\SPEEDOΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöé ΓöîΓöÇ,ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ Γöé
Γöé Γöé Γöé
ΓööΓöÇ -fp ΓöÇΓöÇΓöÇpathnameΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇimplicitfocusΓöÇΓöÿ ΓööΓöÇ ΓöÇk nΓöÇΓöÿ ΓööΓöÇ ΓöÇlcΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇlogpath directoryΓöÇΓöÿ ΓööΓöÇ ΓöÇnocascadeΓöÇΓöÿ
ΓöîΓöÇ ΓöÇcolorcursorΓöÇΓöÉ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇnocopyrightΓöÇΓöÿ ΓööΓöÇ ΓöÇpmcursorΓöÇΓöÿ ΓööΓöÇ ΓöÇbwcursorΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇreversecolorcursorΓöÇΓöÿ ΓööΓöÇ ΓöÇreversebwcursorΓöÇΓöÿ
ΓöîΓöÇrΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇpseudocolorΓöÇΓöÿ ΓööΓöÇ ΓöÇrΓöÇΓöÿ ΓööΓöÇ ΓöÇstaticcolorΓöÇΓöÿ ΓööΓöÇ ΓöÇIΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöö ΓöÇiconifyΓöÿ
Displaying xinit Help
ΓöÇΓöÇxinitΓöÇΓöÇΓö¼ΓöÇ?ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇhΓöÇΓöÿ
Note: The xinit operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -lang language code ΓòÉΓòÉΓòÉ
Specifies the keyboard mapping to use. If the LANG environment variable is set,
this option overrides it. The following table list language codes that you can
use:
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé LANGUAGE Γöé LANG=VALUE Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Belgian Γöé nl_BE Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Belgian French Γöé fr_BE Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Canadian French Γöé fr_CA Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Danish Γöé da_DK Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Dutch Γöé nl_NL Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Finnish Γöé fi_FI Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé French Γöé fr_FR Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé German Γöé de_DE Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Greek Γöé el_GR Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Icelandic Γöé is_IS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Italian Γöé it_IT Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese Γöé ja_JP Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese English Γöé en_JP Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Latin Amer. Spanish Γöé es_LA Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Norwegian Γöé no_NO Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Portuguese Γöé pt_PT Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Spanish Γöé es_ES Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Swedish Γöé sv_SV Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Swiss French Γöé fr_CH Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Swiss German Γöé de_CH Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Turkish Γöé tr_TR Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé United Kingdom Γöé en_GB Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé United States Γöé en_US Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
The default is en_US
Note: The language code is not case-sensitive.
ΓòÉΓòÉΓòÉ <hidden> -unix type ΓòÉΓòÉΓòÉ
Specifies the version of keyboard mapping files that are used. The default is
AIX3.2. Instructions for installing keyboard mapping files from other Unix
vendors can be found inside the XINIT.CMD file itself.
ΓòÉΓòÉΓòÉ <hidden> -clickclienttoraise ΓòÉΓòÉΓòÉ
Tells the server to raise windows to the top when clicks are done in the
application (client) area, which is the usual Presentation Manager behavior.
(Clicks in the PM frame also can raise the window.) This option turns off any
previous -clickframetoraise option on the pmx command line. This option is the
default.
ΓòÉΓòÉΓòÉ <hidden> -clickframetoraise ΓòÉΓòÉΓòÉ
Tells the server to raise windows to the top only when clicks are done on the
PM frame. Clicking on the application (client) area will not raise the window.
This option turns off any previous -clickclienttoraise option on the pmx
command line.
ΓòÉΓòÉΓòÉ <hidden> -co filename ΓòÉΓòÉΓòÉ
Sets the color database file name. The default is TCPIP\X11\RGB.TXT.
ΓòÉΓòÉΓòÉ <hidden> -explicitfocus ΓòÉΓòÉΓòÉ
Tells the server to transfer focus from one client window to another only by
clicking in the window. This is the normal behavior for Presentation Manager
windows and is the default behavior for the server. This option turns off any
previous -implicitfocus option on the pmx command line.
ΓòÉΓòÉΓòÉ <hidden> -fc fontname ΓòÉΓòÉΓòÉ
Sets the cursor font. The default is cursor.
ΓòÉΓòÉΓòÉ <hidden> -fn fontname ΓòÉΓòÉΓòÉ
Sets default font. The default is fixed.
ΓòÉΓòÉΓòÉ <hidden> -fp pathname ΓòÉΓòÉΓòÉ
Sets the default font path. The default is
TCPIP\X11\MISC,TCPIP\X11\75DPI,TCPIP\X11\SPEEDO.
ΓòÉΓòÉΓòÉ <hidden> -implicitfocus ΓòÉΓòÉΓòÉ
Tells the server to transfer focus from one client window to another simply by
moving the pointer into the client area of the window. It is not necessary to
click on a client window to transfer focus to it (provided some PMX client
window already has focus). This is not the normal behavior for Presentation
Manager windows. This option turns off any previous -explicitfocus option on
the pmx command line.
ΓòÉΓòÉΓòÉ <hidden> -k n ΓòÉΓòÉΓòÉ
Sets the keyboard type, where n comes from the following table. Typical USA
keyboards have 101 keys; European languages usually have 102 keys. PMX handles
three types of Japanese keyboards.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé KEYBOARD TYPE Γöé -K FLAG VALUE Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 101 key Γöé 101 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 102 key Γöé 102 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese 5576-A01 (106 keys) Γöé 5576-A01 or 5576A01 or 106A Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese 5576-001 (124 keys) Γöé 5576-001 or 5576001 or 124 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Japanese 5576-002 (106 keys) Γöé 5576-002 or 5576002 or 106 Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> -lc ΓòÉΓòÉΓòÉ
Doubles the dimensions of any cursor, unless it will become too large to be a
Presentation Manager cursor.
ΓòÉΓòÉΓòÉ <hidden> -logpath directory ΓòÉΓòÉΓòÉ
Specifies where to put the PMX.LOG log file. If -logpath is not specified, the
directory for PMX.LOG is specified by the ETC environment variable. If PMX
files are stored on a shared read-only disk, this allows the log file to be
placed elsewhere.
ΓòÉΓòÉΓòÉ <hidden> -nocascade ΓòÉΓòÉΓòÉ
Windows that are not initially positioned by user specifications normally are
cascaded down the screen. The -nocascade parameter says to not cascade if the
application provided an initial location.
ΓòÉΓòÉΓòÉ <hidden> -nocopyright ΓòÉΓòÉΓòÉ
Does not display initial copyright window when starting.
ΓòÉΓòÉΓòÉ <hidden> -pmcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use the PM arrow as the cursor, not an X Window
System cursor.
ΓòÉΓòÉΓòÉ <hidden> -colorcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System colored cursor. This is the
default unless the PM display device driver does not support colored cursors.
ΓòÉΓòÉΓòÉ <hidden> -bwcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System cursor, but with only black
and white instead of colors. This is the default if the PM display device
driver does not support colored cursors.
ΓòÉΓòÉΓòÉ <hidden> -reversecolorcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System colored cursor. The
foreground and background colors will be reversed from the normal colors. For
example, the normal X Window System cursor will be black on the outside, and
white in the middle.
ΓòÉΓòÉΓòÉ <hidden> -reversebwcursor ΓòÉΓòÉΓòÉ
Indicates that PMX should use an X Window System cursor, but only with black
and white instead of colors. Black and white will be reversed from the normal
colors. For example, the normal X Window System cursor will be black on the
outside and white in the middle.
ΓòÉΓòÉΓòÉ <hidden> -pseudocolor ΓòÉΓòÉΓòÉ
Tells PMX to provide a PseudoColor visual (modifiable color maps) for
applications to select. You can specify the -pseudocolor parameter with the
abbreviation -pseudo.
ΓòÉΓòÉΓòÉ <hidden> r ΓòÉΓòÉΓòÉ
Turns on automatic repeating of keys on the keyboard. This is the default.
ΓòÉΓòÉΓòÉ <hidden> -r ΓòÉΓòÉΓòÉ
Turns off automatic repeating of keys on the keyboard.
ΓòÉΓòÉΓòÉ <hidden> -staticcolor ΓòÉΓòÉΓòÉ
Tells PMX to provide a StaticColor visual (nonmodifiable color map) for
applications to select. You can specify the -staticcolor parameter using the
abbreviation -static.
ΓòÉΓòÉΓòÉ <hidden> -I ΓòÉΓòÉΓòÉ
Ignores all remaining arguments.
ΓòÉΓòÉΓòÉ <hidden> -iconify ΓòÉΓòÉΓòÉ
Specifies that the X Window System server window will automatically reduce to a
window-list entry. The X Window System server will also be shown as an icon in
the minimized window folder or on the desktop.
ΓòÉΓòÉΓòÉ <hidden> ? ΓòÉΓòÉΓòÉ
This option displays XINIT help information.
ΓòÉΓòÉΓòÉ <hidden> -h ΓòÉΓòÉΓòÉ
This option displays XINIT help information.
ΓòÉΓòÉΓòÉ 91. xlsfonts Command ΓòÉΓòÉΓòÉ
The xlsfonts command allows you to list information about fonts used on an X
Window System server.
ΓöÇΓöÇxlsfontsΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇ1ΓöÇΓöÿ ΓööΓöÇ ΓöÇCΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdisplay ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇlΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ ΓööΓöÇ ΓöÇmΓöÇΓöÿ ΓööΓöÇ ΓöÇn columnsΓöÇΓöÿ ΓööΓöÇ ΓöÇoΓöÇΓöÿ
ΓööΓöÇlΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇlΓöÇΓöÿ
ΓöîΓöÇ -w 79ΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöÇΓöÇ ΓöÇuΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇw widthΓöÇΓöÿ ΓööΓöÇ ΓöÇfn patternΓöÇΓöÿ
Note: The xlsfonts operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -1 ΓòÉΓòÉΓòÉ
Indicates that listings should use a single column.
ΓòÉΓòÉΓòÉ <hidden> -C ΓòÉΓòÉΓòÉ
Indicates that listings should use multiple columns. This produces the same
output as -n 0.
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Specifies the display, server, and screen to connect to. host is the host name
of the physical display, server specifies the server number, and screen
specifies the screen number. For example:
-display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either,
or both, the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed and
the period is not needed.
ΓòÉΓòÉΓòÉ <hidden> -l ΓòÉΓòÉΓòÉ
Indicates that medium, long, and very long listings should be generated for
each font. For example, -l generates medium listing, -ll generates long
listings, and -lll generates very long listings.
Note: Using the -l parameter can tie up the PMX server for an indefinite
amount of time.
ΓòÉΓòÉΓòÉ <hidden> -m ΓòÉΓòÉΓòÉ
Indicates that long listings should also print the minimum and maximum bounds
of each font.
ΓòÉΓòÉΓòÉ <hidden> -n columns ΓòÉΓòÉΓòÉ
Specifies the number of columns to use in displaying the output. By default, it
will attempt to fit as many columns of font names as possible into the number
of characters you specify with -w width.
ΓòÉΓòÉΓòÉ <hidden> -o ΓòÉΓòÉΓòÉ
Specifies that XLSFONTS should do an OpenFont (and QueryFont if appropriate)
rather than a ListFonts. This is useful if ListFonts or ListFontsWithInfo fails
to list a known font (as is the case with some scaled font systems).
ΓòÉΓòÉΓòÉ <hidden> -u ΓòÉΓòÉΓòÉ
Specifies that the output should be left unsorted.
ΓòÉΓòÉΓòÉ <hidden> -w width ΓòÉΓòÉΓòÉ
Specifies the width, in characters, that should be used to determine the number
of columns to print. The default is 79.
ΓòÉΓòÉΓòÉ <hidden> -fn pattern ΓòÉΓòÉΓòÉ
Indicates that only fonts matching the pattern you specify are listed.
ΓòÉΓòÉΓòÉ 92. xmodmap Command ΓòÉΓòÉΓòÉ
The xmodmap command displays or changes the X Window System keyboard modifier
map and keysym table on a specified display and host. It is intended to run
from your STARTUP.CMD file. Use XMODMAP to set up the keyboard according to
your needs. With no parameters, XMODMAP displays the current map.
A keysym table maps physical keys (keycodes) to logical keys (keysyms). Because
X Window System applications normally use keysyms, the physical location of
keys does not have to be defined to the application. Keysyms are intended to
represent the graphics printed on top of the keys. You can change the physical
key map to any logical key. The modifier map designates the keysyms used for
Shift, Ctrl, Alt, and similar modifier keys. Specify the keysyms used for
modifier functions.
An explanation of command line parameters is displayed when an unrecognized
parameter is passed to XMODMAP.
ΓöÇΓöÇxmodmapΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdisplay ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇgrammarΓöÇΓöÿ ΓööΓöÇ ΓöÇverboseΓöÇΓöÿ ΓööΓöÇ ΓöÇquietΓöÇΓöÿ ΓööΓöÇ ΓöÇnΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé
ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γö┤ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇe expressionΓöÇΓöÿ ΓööΓöÇ ΓöÇpkΓöÇΓöÿ ΓööΓöÇ ΓöÇpmΓöÇΓöÿ ΓööΓöÇ ΓöÇppΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇfilenameΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇpkeΓöÇΓöÿ ΓööΓöÇ ΓöÇ ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Displaying xmodmap Help
ΓöÇΓöÇxmodmapΓöÇΓöÇ ΓöÇhelpΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The xmodmap operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Specifies the display, server, and screen to connect to. host is the host name
of the physical display, server specifies the server number, and screen
specifies the screen number. For example:
-display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either,
or both, the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed,
and the period is not needed.
ΓòÉΓòÉΓòÉ <hidden> -help ΓòÉΓòÉΓòÉ
Prints an explanation of the command line parameters on the standard error
output.
ΓòÉΓòÉΓòÉ <hidden> -grammar ΓòÉΓòÉΓòÉ
Prints a help message describing the expression grammar on the standard error
output. This includes -e expressions.
ΓòÉΓòÉΓòÉ <hidden> -verbose ΓòÉΓòÉΓòÉ
Prints logging information while XMODMAP parses its input.
ΓòÉΓòÉΓòÉ <hidden> -quiet ΓòÉΓòÉΓòÉ
Turns off verbose logging. This is the default.
ΓòÉΓòÉΓòÉ <hidden> -n ΓòÉΓòÉΓòÉ
Indicates that XMODMAP will not change the mappings. It displays what would
happen if the mappings were changed.
ΓòÉΓòÉΓòÉ <hidden> -e expression ΓòÉΓòÉΓòÉ
Indicates an expression to be issued. Any number of expressions can be
specified from the command line. The expressions specify changes to the key map
table and the modifier map.
ΓòÉΓòÉΓòÉ <hidden> -pk ΓòÉΓòÉΓòÉ
Sends the current key map table to the standard output file.
ΓòÉΓòÉΓòÉ <hidden> -pm ΓòÉΓòÉΓòÉ
Sends the current modifier map to the standard output file.
ΓòÉΓòÉΓòÉ <hidden> -pp ΓòÉΓòÉΓòÉ
Sends the current pointer (mouse button) map to the standard output file.
ΓòÉΓòÉΓòÉ <hidden> -pke ΓòÉΓòÉΓòÉ
Sends the current key map table, in the form of XMODMAP expressions, to the
standard output file.
ΓòÉΓòÉΓòÉ <hidden> filename ΓòÉΓòÉΓòÉ
Specifies a file containing XMODMAP expressions to be issued.
ΓòÉΓòÉΓòÉ <hidden> - ΓòÉΓòÉΓòÉ
Specifies that XMODMAP use the standard input as the input file.
ΓòÉΓòÉΓòÉ 93. xprop Command ΓòÉΓòÉΓòÉ
ΓöÇΓöÇxpropΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdisplayΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇf name formatΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼Γöÿ ΓööΓöÇ ΓöÇfont fontΓöÇΓöÿ ΓööΓöÇ ΓöÇframeΓöÇΓöÿ
ΓöödformatΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇfs fileΓöÇΓöÿ ΓööΓöÇ ΓöÇgrammarΓöÇΓöÿ ΓööΓöÇ ΓöÇhelpΓöÇΓöÿ ΓööΓöÇ ΓöÇid idΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇlen nΓöÇΓöÿ ΓööΓöÇ ΓöÇname nameΓöÇΓöÿ ΓööΓöÇ ΓöÇnotypeΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇremove property_nameΓöÇΓöÿ ΓööΓöÇ ΓöÇrootΓöÇΓöÿ ΓööΓöÇ ΓöÇspyΓöÇΓöÿ
Note: The xprop operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Allows you to specify the display, server, and screen to connect to. host is
the host name of the physical display, server specifies the server number, and
screen specifies the screen number. For example:
xprop -display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either
or both the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed,
and the period is not needed.
ΓòÉΓòÉΓòÉ <hidden> -f name format dformat ΓòÉΓòÉΓòÉ
Indicates that the format for name is specified in the format operand, and that
the dformat is specified in the dformat operand. If you do not enter a value
for dformat, the value "=$0+\n" is used.
ΓòÉΓòÉΓòÉ <hidden> -font font ΓòÉΓòÉΓòÉ
Specifies that the properties of the named font are displayed.
ΓòÉΓòÉΓòÉ <hidden> -frame ΓòÉΓòÉΓòÉ
Specifies that when windows are selected by hand (that is, you do not specify
the -name, -root, or -id operands), the xprop command will look at the
window manager frame (if there is one) instead of the X client window. PM
frames on X Windows cannot be selected with this option.
ΓòÉΓòÉΓòÉ <hidden> -fs file ΓòÉΓòÉΓòÉ
Specifies that the file named in the file operand should be used as a source
for more formats for properties.
ΓòÉΓòÉΓòÉ <hidden> -grammar ΓòÉΓòÉΓòÉ
Prints out the detailed grammar (syntax) listing of all options for this
command.
ΓòÉΓòÉΓòÉ <hidden> -help ΓòÉΓòÉΓòÉ
Prints a summary of the operand meanings.
ΓòÉΓòÉΓòÉ <hidden> -id id ΓòÉΓòÉΓòÉ
Specifies a window ID. You can use this operand to select a window rather than
using the pointer to select a window.
ΓòÉΓòÉΓòÉ <hidden> -len n ΓòÉΓòÉΓòÉ
Specifies that no more than n bytes of any property should be read or
displayed.
ΓòÉΓòÉΓòÉ <hidden> -name name ΓòÉΓòÉΓòÉ
Specifies the name of the target window. You can use this instead of using the
pointer to select a window.
ΓòÉΓòÉΓòÉ <hidden> -notype ΓòÉΓòÉΓòÉ
Specifies that xprop should not display the property type.
ΓòÉΓòÉΓòÉ <hidden> -remove property_name ΓòÉΓòÉΓòÉ
Specifies that the named property is to be removed from the target window.
ΓòÉΓòÉΓòÉ <hidden> -root ΓòÉΓòÉΓòÉ
Specifies that the target window is the X root window.
ΓòÉΓòÉΓòÉ <hidden> -spy ΓòÉΓòÉΓòÉ
Specifies that xprop should continually monitor window properties for property
changes.
ΓòÉΓòÉΓòÉ 94. xscope Command ΓòÉΓòÉΓòÉ
The xscope command allows you to display the protocol activity between an X
Window System client and an X Window System server.
ΓöîΓöÇ -hcurrent_hostΓöÇΓöÉ ΓöîΓöÇ -i1ΓöÇΓöÉ ΓöîΓöÇ -o0ΓöÇΓöÉ ΓöîΓöÇ -d0ΓöÇΓöÉ
ΓöÇΓöÇxscopeΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇhserver_hostΓöÇΓöÇΓöÿ ΓööΓöÇ ΓöÇinΓöÇΓöÿ ΓööΓöÇ ΓöÇonΓöÇΓöÿ ΓööΓöÇ ΓöÇdnΓöÇΓöÿ
ΓöîΓöÇ -v1ΓöÇΓöÉ
ΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇvnΓöÇΓöÿ ΓööΓöÇ ΓöÇqΓöÇΓöÿ
Displaying xscope Help
ΓöÇΓöÇxscopeΓöÇΓöÇ -?ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Note: The xscope operands can be entered in any order.
Subcommands
ΓòÉΓòÉΓòÉ <hidden> -hserver_host ΓòÉΓòÉΓòÉ
Specifies the host name or internet address where the X Window System server is
running. If you specify server_host, do not put a space between -h and
server_host. If you do not specify the -h parameter, the server_host defaults
to the host from which you entered the xscope command.
ΓòÉΓòÉΓòÉ <hidden> -in ΓòÉΓòÉΓòÉ
Specifies the input port.
ΓòÉΓòÉΓòÉ <hidden> -on ΓòÉΓòÉΓòÉ
Specifies the output port.
ΓòÉΓòÉΓòÉ <hidden> -dn ΓòÉΓòÉΓòÉ
Sets the server display number.
ΓòÉΓòÉΓòÉ <hidden> -vn ΓòÉΓòÉΓòÉ
Controls the amount of detail in the output. When you print the contents of the
X11 packet fields, some fields are of obvious value, and others are of lesser
value. To control the amount of output, XSCOPE generates output according to
the level of verbosity selected by the user. Levels 2 and 3 can produce a large
amount of data.
The following list shows the control levels:
0 Prints protocol headers only (time, request or reply, and names).
1 Prints useful content fields.
2 Prints almost everything.
3 Format and prints every bit and byte.
If you specify a verbosity level greater than 3, XSCOPE also prints the
hexadecimal buffer.
ΓòÉΓòÉΓòÉ <hidden> -q ΓòÉΓòÉΓòÉ
This option provides relatively quiet output. It is equivalent to -v0.
ΓòÉΓòÉΓòÉ <hidden> -? ΓòÉΓòÉΓòÉ
Displays a list of the parameters.
ΓòÉΓòÉΓòÉ <hidden> XSCOPE Subcommands ΓòÉΓòÉΓòÉ
The following subcommands can be used in the xscope command shell.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöéquit Γöéverbose Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ <hidden> quit Subcommand ΓòÉΓòÉΓòÉ
The quit subcommand ends the XSCOPE session and exits the XSCOPE command shell.
You can issue the quit subcommand with the abbreviation qui.
ΓöÇΓöÇquitΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ <hidden> verbose Subcommand ΓòÉΓòÉΓòÉ
Once you have started XSCOPE, you can use the verbose subcommand to control the
amount of detail in the output generated. The verbose subcommand works like
the -v parameter on the xscope command.
ΓöÇΓöÇverboseΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓòÉΓòÉΓòÉ 95. xset Command ΓòÉΓòÉΓòÉ
The xset command dynamically changes the behavior of any X Window System
server.
ΓöÇΓöÇxsetΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdisplay ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇb onΓöÇΓöÇΓöñ ΓööΓöÇbΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ Γö£ΓöÇ ΓöÇbcΓöÇΓöñ
Γö£ΓöÇb offΓöÇΓöñ ΓööΓöÇvolΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ ΓööΓöÇbcΓöÇΓöÇΓöÇΓöÿ
ΓööΓöÇ ΓöÇbΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇpitchΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ
ΓööΓöÇdurΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇc onΓöÇΓöÇΓöñ ΓööΓöÇcΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ Γö£ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöñ
Γö£ΓöÇc offΓöÇΓöñ ΓööΓöÇvolΓöÇΓöÿ Γöé Γöé ΓöîΓöÇ,ΓöÇΓöÇΓöÇΓöÇΓöÉ Γöé Γöé
Γöé Γöé Γöé Γöé Γöé Γöé Γöé
ΓööΓöÇ ΓöÇcΓöÇΓöÇΓöÇΓöÿ Γöé ΓööΓöÇΓöÇΓö¼ΓöÇ fpΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇpathΓöÇΓö┤ΓöÇΓöÇΓöÿ Γöé
Γöé Γö£ΓöÇ fp=ΓöÇΓöñ Γöé
Γöé Γö£ΓöÇ ΓöÇfpΓöÇΓöñ Γöé
Γöé Γö£ΓöÇ fpΓöÇ Γöñ Γöé
Γöé Γö£ΓöÇ +fpΓöÇΓöñ Γöé
Γöé ΓööΓöÇ fp+ΓöÇΓöÿ Γöé
Γö£ΓöÇfp defaultΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇfp rehashΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇledΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöñ Γö£ΓöÇmΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöñ
Γöé Γöö ΓöÇ ΓöÇΓöÿ ΓööΓöÇ1-32ΓöÇΓöÿ Γöé Γöé ΓööΓöÇaccΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ Γöé
Γö£ΓöÇled onΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ Γöé ΓööΓöÇthrΓöÇΓöÿ Γöé
ΓööΓöÇled offΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ ΓööΓöÇm defaultΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇp pixel_value color_nameΓöÇΓöÿ ΓööΓöÇqΓöÇΓöÿ Γö£ΓöÇr onΓöÇΓöÇΓöñ
Γö£ΓöÇr offΓöÇΓöñ
Γö£ΓöÇrΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇ ΓöÇrΓöÇΓöÇΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γö£ΓöÇsΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöñ
Γöé ΓööΓöÇlengthΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÿ Γöé
Γöé ΓööΓöÇperiodΓöÇΓöÿ Γöé
Γö£ΓöÇs defaultΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇs offΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇs blankΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇs noblankΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇs exposeΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓööΓöÇs noexposeΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Note: The xset operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Specifies the display, server, and screen to connect to. host is the host name
of the physical display, server specifies the server number, and screen
specifies the screen number. For example:
-display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either,
or both, the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed,
and the period is not needed.
ΓòÉΓòÉΓòÉ <hidden> b on ΓòÉΓòÉΓòÉ
Enables the bell.
ΓòÉΓòÉΓòÉ <hidden> b off ΓòÉΓòÉΓòÉ
Disables the bell.
ΓòÉΓòÉΓòÉ <hidden> -b ΓòÉΓòÉΓòÉ
Disables the bell.
ΓòÉΓòÉΓòÉ <hidden> b vol, pitch, dur ΓòÉΓòÉΓòÉ
Allows you to set the pitch, loudness, and duration of the bell. The volume is
expressed in terms of a percentage of its maximum. The pitch is expressed in
hertz, and the duration is expressed in milliseconds. (PMX supports only pitch
and duration. Any volume greater than 0 is treated as if it were 100.)
ΓòÉΓòÉΓòÉ <hidden> -bc, bc ΓòÉΓòÉΓòÉ
Controls bug compatibility mode in the server. bc with a preceding hyphen (-)
disables bug compatibility. bc enables bug compatibility.
The need for this option is determined by the following circumstances. Some
clients, previous to release 4, pass illegal values in some protocol requests
and servers, previous to release 4 also, do not correctly generate errors in
these cases. Such clients, when run with a release 4 server, will terminate
abnormally or otherwise fail to operate correctly. Bug compatibility mode
explicitly reintroduces certain bugs into the X Window System server, so that
many such clients can still be run.
Note: This mode should be used with caution. The server must support the
MIT-SUNDRY-NONSTANDARD protocol extension in order for this option to work. New
application development should be done with this mode disabled.
ΓòÉΓòÉΓòÉ <hidden> c on ΓòÉΓòÉΓòÉ
Enables the key click.
ΓòÉΓòÉΓòÉ <hidden> c off ΓòÉΓòÉΓòÉ
Disables the key click.
ΓòÉΓòÉΓòÉ <hidden> -c ΓòÉΓòÉΓòÉ
Disables the key click.
ΓòÉΓòÉΓòÉ <hidden> c vol ΓòÉΓòÉΓòÉ
Enables the key click, if vol is greater than 0 or is not specified; disables
the key click if vol is 0. The vol is the volume expressed as a percentage of
maximum. (The PMX server does not support key click.)
ΓòÉΓòÉΓòÉ <hidden> fp path, fp= path ΓòÉΓòÉΓòÉ
Sets the font path used by the server. path must be a directory or a list of
directories separated by a comma. The directories are interpreted by the
server, not the client, and are server-dependent. Directories that do not
contain font databases created by MKFONTDIR will be ignored by the server.
ΓòÉΓòÉΓòÉ <hidden> -fp path, fp- path ΓòÉΓòÉΓòÉ
Causes the server to remove directories from the current font path. To remove a
font path directory list, include a comma to separate the paths. -fp removes
the directories from the beginning of the font path. fp- removes the
directories from the end of the font path.
ΓòÉΓòÉΓòÉ <hidden> +fp path, fp+ path ΓòÉΓòÉΓòÉ
Causes the server to add directories from the current font path. To add a font
path directory list, include a comma to separate the paths. +fp adds the
directories to the beginning of the font path. fp+ adds the directories to the
end of the font path.
ΓòÉΓòÉΓòÉ <hidden> fp default ΓòÉΓòÉΓòÉ
Restores the default font path.
ΓòÉΓòÉΓòÉ <hidden> fp rehash ΓòÉΓòÉΓòÉ
Causes the server to reread the font databases.
ΓòÉΓòÉΓòÉ <hidden> led 1-32 ΓòÉΓòÉΓòÉ
Turns on a specified light-emitting diode (LED) on the keyboard. If no number
is given, all LEDs are turned on. The association between a number and a
specific LED is server-dependent. (The PMX server does not support control of
LEDs.)
ΓòÉΓòÉΓòÉ <hidden> -led 1-32 ΓòÉΓòÉΓòÉ
Turns off a specified LED on the keyboard. If no number is given, all LEDs are
turned off.
ΓòÉΓòÉΓòÉ <hidden> led on ΓòÉΓòÉΓòÉ
Allows you to turn on all LEDs on the keyboard.
ΓòÉΓòÉΓòÉ <hidden> led off ΓòÉΓòÉΓòÉ
Allows you to turn off all LEDs on the keyboard.
ΓòÉΓòÉΓòÉ <hidden> m acc thr ΓòÉΓòÉΓòÉ
Allows you to set mouse acceleration and threshold. The pointer goes acc times
as fast when it travels more than thr pixels in a short time. This way, the
mouse can be used for precise alignment of the pointer when it is moved slowly,
but the pointer travels quickly across the screen when the mouse moves quickly.
(The PMX server does not support mouse acceleration and threshold.)
ΓòÉΓòÉΓòÉ <hidden> m default ΓòÉΓòÉΓòÉ
Resets the mouse acceleration and threshold to the default values.
ΓòÉΓòÉΓòÉ <hidden> p pixel_value color_name ΓòÉΓòÉΓòÉ
Sets the pixel colors. The pixel_value is a color map entry number in decimal.
color_name is a color specification.
You can change the root background colors on some servers by changing the
entries for BlackPixel and WhitePixel. Although these are often 0 and 1, they
need not be. Also, a server can allocate those colors privately, in which case
an error is generated. The map entry must not be a read-only color, or an error
results. (The PMX server currently supports only StaticColor or StaticGray
visuals, so the color table has only read-only entries.)
ΓòÉΓòÉΓòÉ <hidden> q ΓòÉΓòÉΓòÉ
Queries the server for the current settings of the values that XSET allows you
to change.
ΓòÉΓòÉΓòÉ <hidden> r on ΓòÉΓòÉΓòÉ
Enables the automatic keyboard repeat function.
ΓòÉΓòÉΓòÉ <hidden> r off ΓòÉΓòÉΓòÉ
Disables the automatic keyboard repeat function.
ΓòÉΓòÉΓòÉ <hidden> r ΓòÉΓòÉΓòÉ
Enables the automatic keyboard repeat function.
ΓòÉΓòÉΓòÉ <hidden> -r ΓòÉΓòÉΓòÉ
Disables the automatic keyboard repeat function.
ΓòÉΓòÉΓòÉ <hidden> s length period ΓòÉΓòÉΓòÉ
Controls the length, in seconds, that the server must be inactive before screen
saving is activated. The period parameter (in seconds) determines how often the
background is changed during screen saver activity. If no length or period is
specified, the screen saver default function is restored. (The PMX server does
not support screen saver activity.)
ΓòÉΓòÉΓòÉ <hidden> s default ΓòÉΓòÉΓòÉ
Restores the default screen-saver activity.
ΓòÉΓòÉΓòÉ <hidden> s off ΓòÉΓòÉΓòÉ
Disables the screen-saver function.
ΓòÉΓòÉΓòÉ <hidden> s blank ΓòÉΓòÉΓòÉ
Specifies that, when screen-saver activity occurs, the screen is cleared.
ΓòÉΓòÉΓòÉ <hidden> s noblank ΓòÉΓòÉΓòÉ
Allows you to specify that when screen saver activity occurs, a background
pattern is used rather than clearing the screen.
ΓòÉΓòÉΓòÉ <hidden> s expose ΓòÉΓòÉΓòÉ
Specifies that window exposures sent by the server to clients regenerate the
screen contents when the server stops the screen-saver activity.
ΓòÉΓòÉΓòÉ <hidden> s noexpose ΓòÉΓòÉΓòÉ
Disables the screen-saver function unless the server can regenerate the screens
without causing exposure events to be sent to client windows.
ΓòÉΓòÉΓòÉ 96. xstdcmap Command ΓòÉΓòÉΓòÉ
The xstdcmap command selectively defines standard colormap properties.
ΓöÇΓöÇxstdcmapΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöö ΓöÇallΓöÇΓöÿ Γöö ΓöÇbestΓöÇΓöÿ Γöö ΓöÇblueΓöÇΓöÿ Γöö ΓöÇdefaultΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdelete mapΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdisplay ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ Γöö ΓöÇgreenΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
Γöö ΓöÇgreyΓöÇΓöÿ Γöö ΓöÇhelpΓöÇΓöÿ Γöö ΓöÇredΓöÇΓöÿ Γöö ΓöÇverboseΓöÇΓöÿ
Note: The xstdcmap operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -all ΓòÉΓòÉΓòÉ
Specifies that you want to define all six standard colormap properties on each
screen of the display. Because not all screens will support visuals where all
six standard colormap properties have meaning, the xstdcmap utility determines
the allocations and visuals for the colormap properties of a screen. The
properties you define will replace any already defined.
ΓòÉΓòÉΓòÉ <hidden> -best ΓòÉΓòÉΓòÉ
Specifies that the RGB_BEST_MAP should be defined.
ΓòÉΓòÉΓòÉ <hidden> -blue ΓòÉΓòÉΓòÉ
Specifies that the RGB_BLUE_MAP should be defined.
ΓòÉΓòÉΓòÉ <hidden> -default ΓòÉΓòÉΓòÉ
Specifies that the RGB_DEFAULT_MAP should be defined.
ΓòÉΓòÉΓòÉ <hidden> -delete map ΓòÉΓòÉΓòÉ
Specifies a colormap to delete. The map can be one of:
best
blue
default
red
green
grey
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Allows you to specify the display, server, and screen to connect to. host is
the host name of the physical display, server specifies the server number, and
screen specifies the screen number. For example:
xstdcmap -display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either
or both the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed,
and the period is not needed.
ΓòÉΓòÉΓòÉ <hidden> -green ΓòÉΓòÉΓòÉ
Specifies that the RGB_GREEN_MAP should be defined.
ΓòÉΓòÉΓòÉ <hidden> -grey ΓòÉΓòÉΓòÉ
Specifies that the RGB_GRAY_MAP should be defined.
ΓòÉΓòÉΓòÉ <hidden> -help ΓòÉΓòÉΓòÉ
Displays brief descriptions of the command operands.
ΓòÉΓòÉΓòÉ <hidden> -red ΓòÉΓòÉΓòÉ
Specifies that the RGB_RED_MAP should be defined.
ΓòÉΓòÉΓòÉ <hidden> -verbose ΓòÉΓòÉΓòÉ
Specifies that the xstdcmap utility will print logging information as it parses
the input and defines colormap properties.
ΓòÉΓòÉΓòÉ 97. xwininfo Command ΓòÉΓòÉΓòÉ
The xwininfo command displays information about windows. The information
displayed depends on the options you chose.
You can select the target window with the mouse (by clicking any mouse button
in the desired window), by specifying its window ID on the command line with
the -id parameter, -name parameter and -root parameter.
ΓöÇΓöÇxwininfoΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇhelpΓöÇΓöÿ ΓööΓöÇ ΓöÇid idΓöÇΓöÿ ΓööΓöÇ ΓöÇname nameΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇrootΓöÇΓöÿ ΓööΓöÇ ΓöÇintΓöÇΓöÿ ΓööΓöÇ ΓöÇtreeΓöÇΓöÿ ΓööΓöÇ ΓöÇstatsΓöÇΓöÿ ΓööΓöÇ ΓöÇbitsΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇeventsΓöÇΓöÿ ΓööΓöÇ ΓöÇsizeΓöÇΓöÿ ΓööΓöÇ ΓöÇwmΓöÇΓöÿ ΓööΓöÇ ΓöÇshapeΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇframeΓöÇΓöÿ ΓööΓöÇ ΓöÇmetricΓöÇΓöÿ ΓööΓöÇ ΓöÇenglishΓöÇΓöÿ ΓööΓöÇ ΓöÇallΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇchildrenΓöÇΓöÿ ΓööΓöÇ ΓöÇshapeΓöÇΓöÿ ΓööΓöÇ ΓöÇtreeΓöÇΓöÿ
ΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇ
ΓööΓöÇ ΓöÇdisplay ΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇ:serverΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÿ
ΓööΓöÇhostΓöÇΓöÿ ΓööΓöÇ.screenΓöÇΓöÿ
Note: The xwininfo operands can be entered in any order.
ΓòÉΓòÉΓòÉ <hidden> -help ΓòÉΓòÉΓòÉ
Prints a summary of the xwininfo command.
ΓòÉΓòÉΓòÉ <hidden> -id id ΓòÉΓòÉΓòÉ
Specifies the ID of a target window. This is useful in debugging X applications
where the target window is not mapped to the screen or where the use of the
mouse might be impossible or interfere with the application.
ΓòÉΓòÉΓòÉ <hidden> -name name ΓòÉΓòÉΓòÉ
Specifies the name of the target window.
ΓòÉΓòÉΓòÉ <hidden> -root ΓòÉΓòÉΓòÉ
Specifies that the X Window System server root window is the target window.
This is useful in situations where the root window is obscured.
ΓòÉΓòÉΓòÉ <hidden> -int ΓòÉΓòÉΓòÉ
Specifies that all X Window System server window IDs are displayed as integer
values. The default is to display them as hexadecimal values.
ΓòÉΓòÉΓòÉ <hidden> -tree ΓòÉΓòÉΓòÉ
Displays the root, parent, and child window IDs and the name of the selected
window.
ΓòÉΓòÉΓòÉ <hidden> -stats ΓòÉΓòÉΓòÉ
Displays location and appearance attributes of the selected window. This
includes the window's location, width, height, depth, border width, class, and
map state. This is the default if no parameters are specified.
ΓòÉΓòÉΓòÉ <hidden> -bits ΓòÉΓòÉΓòÉ
Displays information about the window and bit gravities, the window's backing
store hint and backing_planes value, its backing pixel, and whether or not the
window has save-under set.
ΓòÉΓòÉΓòÉ <hidden> -events ΓòÉΓòÉΓòÉ
Displays the selected window's event masks. Both the event mask of events
wanted by some client and the event mask of events not to propagate are
displayed.
ΓòÉΓòÉΓòÉ <hidden> -size ΓòÉΓòÉΓòÉ
Displays the selected window's sizing hints. Displayed information includes
details about the sizing of your windows.
ΓòÉΓòÉΓòÉ <hidden> -wm ΓòÉΓòÉΓòÉ
Displays the selected window's window manager hints. This includes whether the
application accepts input, what the window's icon window number and name are,
where the window's icon should go, and what the window's initial state should
be.
ΓòÉΓòÉΓòÉ <hidden> -shape ΓòÉΓòÉΓòÉ
Prints shape extents. (PMX does not support the shape extension.)
ΓòÉΓòÉΓòÉ <hidden> -frame ΓòÉΓòÉΓòÉ
Causes window manager frames to be recognized when manually selecting windows.
(PMX does not support this option.)
ΓòÉΓòÉΓòÉ <hidden> -metric ΓòÉΓòÉΓòÉ
Causes all individual height, width, and x and y positions to be displayed in
millimeters as well as number of pixels, based on what the server determines
the resolution to be. Geometry specifications in +x+y form are not changed.
ΓòÉΓòÉΓòÉ <hidden> -english ΓòÉΓòÉΓòÉ
Causes all individual height, width, and x and y positions to be displayed in
inches (feet, yards, and miles if necessary) as well as number of pixels.
-metric and -english can both be enabled at the same time.
ΓòÉΓòÉΓòÉ <hidden> -all ΓòÉΓòÉΓòÉ
Provides all available information.
ΓòÉΓòÉΓòÉ <hidden> -children ΓòÉΓòÉΓòÉ
Displays the selected window's root, parent, and children windows' IDs and
names. This parameter is similar to the -tree parameter.
ΓòÉΓòÉΓòÉ <hidden> -shape ΓòÉΓòÉΓòÉ
Causes the selected window's window and border shape extents to be displayed.
ΓòÉΓòÉΓòÉ <hidden> -tree ΓòÉΓòÉΓòÉ
Specifies a display similar to the -children option but displays all children
recursively.
ΓòÉΓòÉΓòÉ <hidden> -display host:server.screen ΓòÉΓòÉΓòÉ
Specifies the display, server, and screen to connect to. host is the host name
of the physical display, server specifies the server number, and screen
specifies the screen number. For example:
-display your_node:0.1
This specifies screen 1 of server 0 on the display named by your_node. Either,
or both, the host name and screen can be omitted. If the host name is omitted,
the local display is assumed. If the screen is omitted, screen 0 is assumed,
and the period is not needed.